Victoria Manual Cast Iron Grain Mill with High Hopper, Premium Corn-Grinding Mill and Grain Grinder, Made in Colombia

I purchased this Victoria Manual Cast Iron Grain Mill mainly to grind raw, inexpensive sunflower seeds into fine sunflower chips for our wild finches—and it works perfectly for that! The mill is solidly built, very sturdy, and easy to assemble. Adjusting the grind setting is simple, allowing me to get exactly the texture I want—fine enough to be easy for the finches to eat, but not so fine that it turns into flour. The hopper holds a generous amount of seeds, and the clamp mounts securely to my workbench. It grinds smoothly and efficiently without any wobble or slippage. Overall, this is a high-quality, well-designed tool that feels like it will last a lifetime. I’ve included a photo showing the texture of the ground sunflower seeds—it’s just right for finch feeders. Highly recommended!

Great for cracking wheat for cereal or feed. This does NOT make flour and it doesn't say it does. I suspect it would also crack corn as well. But this quickly does a great job at what it is good for. Easy to set up and easy to use.

Our grinder arrived with the box bursting open, holes on one end and a dent in the hopper because of poor packaging. At least it was part of a larger order so nothing got lost. It is very heavy for the tiny box it comes in. This grinder is super sturdy and seems to grind well though I could not get a super fine textured flour even after adjusting the grind and regrinding twice. Cleaning after use is straightforward, but the main body is quite heavy so someone with weak hand strength would find this difficult. Plus, flour and grain pieces get stuck in the screw divets and at the base of the grinder. Very hard to get all the flour sludge out. I will start brushing off the flour before washing which should help. Does a decent job grinding and not too hard to push. Good, inexpensive hand powered grinder.

This hand mill WILL grind nixtamal finely enough for tortillas that puff on the griddle like they're supposed to. You'll get much better results than from a food processor. But here are a few cautionary tips: 1). When assembling the mill, screw the grinding plates as tightly together as possible. Otherwise the dough will not be fine or smooth enough. If too much play still remains between the plates, use a half-inch-diameter steel O-ring (not included) as a brace to keep the plates pressed tightly together. 2). Although the mill comes with a fairly large attachable hopper, I actually believe it best not to use it for tortilla dough. Feed only a few tablespoons of rinsed nixtamalized corn into the mill at a time, dribbling in just a bit of water as you grind. You want to keep an eye on the process, and the mill's main assembly includes an intake area that's the right size for this. Watch and monitor the corn as it moves down and along the large screw-shaped auger that guides the corn to the grinding plates. 3). For masa that's fine enough, you'll probably need to grind it twice and possibly three times-- again, keeping the plates tightly together, and again, feeding in just a couple spoonfuls at a time. On the second grind you'll probably have to use a wooden spoon handle to occasionally coax the dough to the auger. A few drops of water will help, but not too much! Masa that's wet and sticky won't work. The process obviously requires some labor, and the final consistency will almost certainly be somewhat coarser than the silky-smooth texture you can achieve with the best masa harina. When pressed, the tortillas will have a more rustic, pebbly texture, but they will puff up on the griddle, and they will be tender. And if you're wondering if freshly ground masa is dramatically superior to dough made from reconstituted masa harina, the answer is YES.

Easy to assemble and great quality

Maybe it's the table I have it attached to, but I feel like it will break the edge of the table off if I use it too much. Have to use the table bc the clamp doesn't open enough to attach it to any of my kitchen counters. I don't like how the hopper attaches to the grinder. It seems a little flimsy and its attachment has holes around the bottom where grains can leak through. It seems to work ok for coffee. Grains are very coarse though, even at the lowest setting.

Wish I could give this mill more stars! Grinds nixtamalized corn to a fine texture that’s perfect for making home made corn tortillas from scratch.

!!!! DO NOT USE THIS FOR FOOD UNTIL YOU HAVE READ REVIEWS. THIS GRINDER WILL, WITHOUT QUESTION, LEAVE PAINT AND POSSIBLY METAL SHAVINGS IN YOUR FOOD. !!!! Other reviewers have written countless warnings and I took all into account before purchasing this product. I was fully prepared to take a cheap piece of garbage and work it into a usable machine, and that's exactly what will be happening. The WORST offense of this product is the coating. This is not a nitpick coming from almost every negative review, The ENTIRE machine is coated in metallic silver spray / powder coat, INCLUDING the grinding wheels. It is not a question of IF, you WILL get chips of paint in your food. It took me less than 3 rotations of the handle for the wheels to start spitting out shiny little bits of paint (see attached photos of the paint on my fingers and shorts). This is no doubt harmful to the consumer and is simply lazy on the producer's end. If you still plan to purchase this, please for the sake of yours and your family's health, give the whole thing a long bath in paint thinner, then give it some canola oil to protect the (incredibly cheap) cast iron from the inevitable oxidation. The LESS offensive problems would mostly come down to construction. Only the hopper is made of steel, the rest of this product is made of cheap powder cast iron that is improperly treated and extremely brittle, typical for cheap overseas metal products. There are extremely poor tolerances in almost every aspect, but they're manageable with small adjustments, new wingnuts, and rubber grommets. JB Weld is probably more structurally sound than the entire grinder so don't be afraid to glue it back together when it eventually snaps. The last complaint that myself and hundreds of others have had is the ridiculous amount of NON FOOD SAFE LUBRICANT that this thing was drenched in upon arriving. Smelled (and tasted, don't judge) like 3 in 1 machine lubricant. It was actually almost impossible to hold in my hand until three rounds of degreaser and dish soap. I'm still planning on putting charcoal through the grinder a couple more times to get the last of the paint and lube. For a $50 used, repackaged, powder cast iron that needed a little love and elbow grease, I would be perfectly happy to take this and shut up considering how much a good grain grinder is. But the fact that they are selling hundreds of these a month and implying that this thing is safe to use for food right out of the box is just immoral and frankly quite upsetting. I will be reporting this product and I hope you will too, it's literally criminal that this product is being sold without warnings.

Optimo

bom

Para Uso doméstico puntual.

ممتاز واصلي القمع الكبير فيه طقات والبلاستيك فيه كسر جزئي لكن امازون كعادتها تعطيك حقك شكرا امازون

I am using this on almost the largest setting to split soybeans (which dehulls them) for making tempeh and soy milk. It works great. I can't see it ever breaking. So I'd say worth the price, since I'll own it forever. Although if you use it with wet ingredients you might have to be more careful about rust when washing it. I haven't washed mine since I use it only for dried soy beans.