877LM Garage Door Opener Keypad, Compatible with liftmaster/Chamberlain/Craftsman Garage Door Openers with Yellow Learn Button, Wireless Keyless Keypad

Worked perfectly. Easy install. Worked first try!

I have a linkmaster garage door opener. This remove entry panel installed first try in under 5 minutes. Works perfect. Can't ask for anything better.

Works very well. Great replacement for broken unit.

Instructions are 110% False. This includes the paper instruction "printed" on the inside of the remote, and an extra included paper manual. DO NOT FOLLOW. Instead, look up the Youtube instructions for this remote. THOSE worked. Wasted 60 minutes of life do to someone not doing their job properly with instructions. Almost had this unit returned as faulty or false. Would not purchase again. EVER.

I had this set up in ten minutes. Would have been two minutes but I didn't know I needed to be a little farther away from my opener when testing it. So it went like this, I'm on the ladder, followed the easy instructions, my opener clicked and lights flashed, I thought it was good (spoiler: it was), so I decided to test it, I'm still on the ladder and right next to the opener. Wouldn't work. I messed around messed around, cleared the codes, did it all again, flash and click, and I just happened to get off the ladder to get something else and decided to test it. Voila. Worked. So, once you set it up, get a ways away from your opener to do the first test. They should add that into the instructions cause I doubt I'm the first dodo to be tripped up by this.

I have a 2019 Chamberlain/LiftMaster Keypad Motor, Model 8365W-267 MFG, Dated 01/21/2019(Yellow Learn Button), with a Chamberlain/LiftMaster Keypad 877LM. I searched a lot because the keypad works with the Motor Frequency. This keypad works 315Mhz or 390Mhz door opener Mfg after 1 Jan 1993, and it has a Learn Button in the motor. The Instructions are Very Crisp, Clear, and easy to Follow. It Comes with a Battery, but I put Duracell as it goes longer here how I configure it.1. Open The Garage Door only. Don't Press any button on the Motor Unit.2. Take the keypad and press both buttons *# until the keypad light stops blinking.3. Enter the 4-digit code, press the # Button, and Press the Enter Button based on the Button's color. Since my Garager Motor has a Yellow Button, I Press the Enter Button Once Only, and to Exit the program, Press button 0.4. Now Go to Garage Motor with the New Keypad and Press the Release Yellow Button Quickly. Now, On the Keypad, Enter the PIN Code and Press Enter, and the Garage Door will Close.You are Done Now. Fix the Keypad with a Screw—a big Screw for Hold and a Small Screw for Tight Bottom Plastic parts.I'm Very Happy with the Seller's Communication. The Simple Rule is to check the Garage Motor Frequency + Learn Button Color and Order it. Don't be confused by the model number.

Good quality with a durable outer shell that will last. Worth the money if you want access via a garage door that already has a smart opener. It would have a 5 star rating but for the clarity of the directions.

Good