AirLess Lite Resin Bubble Remover, 10 Min Remove Bubbles, 95kPa Vacuum Degassing Chamber, Compact Airless Lite Machine for Epoxy Molds Casting,UV Resin,Silicone,Jewelry Making (Patented)

I got this to replace my old Airless machine that I got 2 years ago and worked great until someone else knocked it off of the counter and broke it. If you are considering this Airless Lite machine, don't consider anymore. Order it. Now. Go on....... do it. This sleek and attractive little powerhouse is exactly what you need and nothing that you don't. No big huge bells and whistles or confusing displays. Just an on/off button, a plug and an pressure relief valve. It works BEAUTIFULLY. Its the perfect size for the average 8 ounce plastic mixing cup. On 1:1 epoxy it works within 5-7 minutes. Deep Pour takes virtually no time at all since it is so thin. If you are using Fast Cure resin, this is not going to remove bubbles as fast as, or as efficiently as 1:1 or Deep Pour. DO NOT expect it to. Fast Cure is EXTREMELY viscous, and the thickness slows down the bubble remover exponentially. If you try to debubble Fast Cure, it will take AT LEAST 2 cycles of 10 minutes each, and even then it won't remove all of the bubbles because of the resin consistency. That being said, even large commercial vacuum chambers have issues debubbling Fast Cure resin. This machine is very well made and can go on darn near any surface. Low noise, which is great. It is a bit louder when it first starts up, due to creating the vacuum, but once it reaches the max, it quiets down. TLDR: This is a great machine that I HIGHLY recommend for home resin crafters or even small businesses.

Very good quality product, satisfied with all the functions. Value for money.

I was very skeptical about buying this product. I watched several different videos on YouTube that were reviews of this bubble remover. I read a lot of reviews on here and other sites. I figured I didn’t have anything to lose. I would give it a try and if I didn’t like it, I would return it. But it worked excellently!! I took a time lapsed video where you can see the bubbles being removed. And even though there are a few bubbles at the very top as soon as the pressure releases those bubbles disappear any other bubbles that are still remaining at the very top are very easily removed. This alleviated all of the micro bubbles that I would get in my resin. I love this machine. I’m so glad I bought it. I’ve used about a dozen times now. Edited to add that resin temperature affects the bubbles removed. If you don’t warm it before mixing, it will take longer. But it still works great!

Update: I was contacted by the company after leaving the original review, and they provided me with excellent customer service and offered some solutions. I went ahead and tried another type of Resin and had better results. As a side note, I saw a YouTube video in which a gentleman said that it is okay to add dyes before putting the resin in the machine, but I would not recommend putting in mica powder first as it got very hot and cured very quickly. It is best to add the Mica powder after running the resin through the machine. Also, I heard a theory that using a larger, wider container in the machine will give you more surface area, which can help release bubbles rather than a single, deeper cup, but I tested this theory and still got a huge amount of micro bubbles even with the larger wider silicone cup using my usual Art Resin. Another alternative is, once you measure the amount of resin in a bigger cup, transfer the contents to four separate silicone cups, and put them all in at once. I will be continuing to work with this machine and will update this listing review after trying some different methods and different resins. I have added two stars to my original review, one for the excellent customer service that I received and also because this machine does work well to reduce bubbles in silicone and when working with certain resins. As a side note, Art Resin is not meant to be spread thicker than 1/8" according to their web site, and so perhaps its thickness is not letting the micro bubbles escape even when at the top. Today I put 200 mg of Art Resin through three cycles and lost 20 minutes of work time. It did not remove many of the micro bubbles after three cycles, and my project started curing before I was done working with it, and so I probably won't be using Art Resin anymore when a project is going to take some time to do. I will update this after trying the machine with a different resin. Original Review: I was excited to use this given some other reviews, but it didn't work for me. As others have mentioned, it might not work well for Art Resin, which is the only Resin that I use due to its high resistance to yellowing rating. I tried it with both plastic cups and silicone cups. I tried it only with Art Resin. I tried it over and over again, using the 5-minute setting and 9-minute setting and sometimes two or three times in a row. I always seem to get a huge amount of micro bubbles, most of which float to the top like a glass of beer. About half are popped when I open the valve or perhaps they just sink back into the mixture. The ones that remain don't seem to pop on their own, and only the ones at the surface will pop with flame. The non surface ones take a long time to come to the surface if they come up at all. I think what is happening is the machine is breaking the larger bubbles and transforming them into mini bubbles. I would rather have 100 larger bubbles than 1000 mini bubbles because at least the larger bubbles come to the surface where I can put a flame to them.

I purchased the Resiners Resin Bubble Remover back in September, but didn’t get around to using it until October/November. Since then, I have only used it a few times sporadically because I mainly use UV Resin. Initially, it seemed to work fine, but now it no longer removes bubbles from my resin projects. Just last night, I tried using it on two 4 oz. cups of resin and, despite running two rounds of the 9-minute cycle, bubbles remained in both cups. I have followed the instructions multiple times, but it still fails to perform as advertised. I've tried different configurations, including using just one cup with 4 oz. and two cups with 4 oz. each, but the results are consistently disappointing. Given its limited use and the fact that it no longer works effectively, I am very disappointed with this product. I had high hopes, but it simply does not deliver on its promise. Pros: Initial Performance: Initially worked fine and removed bubbles as expected. User Instructions: The product comes with clear instructions for use. Cons: Durability: Stopped working effectively after limited use over a short period. Inconsistent Results: Failed to remove bubbles even after multiple rounds and different configurations. Disappointment: Did not meet expectations despite following the instructions. Limited Usefulness: Only used a few times sporadically before it stopped functioning properly.

Just what I needed. I am working on holiday gifts made from wood and epoxy. I have never used expoy in this way before and my test piece was full of tiny air bubbles and did not turn out clear. After a bit of research I figured I would give a vacuum chamber a shot. I found this one and through what the heck. I ordered it. I used it for the first time today. The difference is amazing. My second pour is darn near bubble free. I'm sure with time and a few more tries I should be getting bubble free pours. Product is easy to use. Plug in put stired epoxy cup in chamber and turn on. Let run for about 10 minutes. Turn off, release vacuum, and our epoxy into mold.

Seriously disappointed. I've tried to use this several times now testing different things and resins. All with the same outcome... Ruined resin! It takes 10 minutes MINIMUM to do much of anything. So automatically any quick cure resins are out of the picture even if this worked perfectly within or at the 10 minute mark. Your resin has started to set and is hot by the time its done in the chamber so you have maybe a minute if your very quick to work with it. I make epoxy tumblers, so I need to get that time of leveling out so this just isn't working for me there. I've used regular set resin and the same result. IF it removes let's say maybe 90% of bubbles your still left with larger bubbles in the resin and not 100% bubble free to work with. I typically use 40 to 50 ml volume for each cup to have enough and have some left over. I swear there is more bubbles when it's done. I've even let it go for 20 minutes and it never got much better than the top layer still having a massive amount of micro bubbles. It's easy enough to use so I feel like user error is not a major effect here. I really wanted to love this and I hate it. Waste of money. Waste of time. Wish I could send it back and get my money back.

Bought for a friend who gave it glowing reviews, has been a game changer for her resin products. Has seen quite a bit of use these past few months, still working fine.

Another great product from Resiners, after seeing Ben's Worx using one on his YouTube channel I had to buy one. The bubble remover fits perfect on my work table and is not that noisy, very easy to use and really does bring the air bubbles out of resin. The build seems good quality and I believe it will last a long time. I got it at a good price aswell.

I've been using the vacuum chamber for a couple of months and I'm really happy with the results. It works best on medium and low viscosity casting resins. Doesn't work with high viscosity resin which are too thick to pour into moulds anyway. I'm quite impressed with how well it removes bubbles. It's definitely worth spending the money on if you pour a lot of small-medium size pieces.

It removes alot of the bubbles, but not all of them which results in having to use it twice and then it's hard to work with the resin

Stra consigliato per chi come me fa lavoretti fai da te con Resine epossidiche o comunque sia liquidi nei quali non vuoi avere bolle d'aria al suo interno. Rimuove l'aria in modo impeccabile, facile da usare e non impiega tempi lunghi. Unica pecca è l'apertura del coperchio dopo il sotto vuoto, la trovo ancora un po difficile ma sarà perchè non ho ancora trovato un metodo rapido ed infallibile per aprirlo senza impazzire ahahaha Consiglio caldamente a chiunque faccia questi lavori fai da te di comprarlo la qualità dei prodotti cambia DRASTICAMENTE in MEGLIO!

Der Versand war 1A, schnell und einfach, die Anwendung ist auch super simpel und liefert ein sehr gutes Ergebnis. Anfangs bilden sich sehr weiße Blasen und es schäumt etwas an der Oberfläche aber sobald man die Luft rein lässt, verschwindet der Schaum und die Blasen. Je nachdem wieviel Zeit man dem Gerät gibt sind auch dementsprechend viele Blasen verschwunden. Ich empfinde es als leise und habe mir ein lauteres Geräusch vorgestellt. Sehr gut und weiter zu empfehlen.