Silicone Body Mount Kit for 2008-2016 Ford F-250 F-350 Regular Cab Extended Cab Superior Silicone Cab Mount Bushings Improve Bumpy Ride Durable Components Outperforms OEM and PU Mounts (Red 6 Pack)

Took a chance purchasing these for my 2008 F250. OEM body mounts were trashed. Thanks Ford. Did lots of research and discovered that I preferred silicone replacement body mounts as opposed to OEM or polyurethane. Found these on Amazon. Thought I'd take a chance. Glad I did. However, I discovered some idiosyncrasies about changing these out. Not a deal breaker by any means.1. When attempting to remove the bolt that holds the body mount in place, I would suggest accessing the cage nuts (not the most brilliant design Ford could have come up with), heating them up for 30-40 seconds with a propane torch similar to what plumbers use to sweat copper fittings. MAP gas not necessary. Be careful to not burn your truck down! Use common sense. Heating the bolt head from under the truck is fairly useless. Some cage nuts will still spin causing lots of frustration. The cage nuts are fairly accessible. On my truck the front ones are accessible on either side of the radiator. Simply remove the rubber air baffles on both sides of the radiator and you will easily see the cage nuts. Then inside the cab there is one on the driver's and passenger's floor boards. You will find black rubber oval plugs. Simply remove to access the cage nuts. At the back of the cab you will find 1 at each of the corners. Remove the jack and related tools and you will find black caps about 1" in diameter and about 1" tall. These pop out. Using this method speeds up the process.2. Do not torque the new body mounts to OEM settings, unless you want to experience engine vibration "noise" along with road noise and harsh ride. On my truck, I torqued mine to 50 ft. lbs. and all the unpleasantness disappeared. Now it rides good! No engine noise, no harsh related ride, no road noise. Just quiet and smooth. Yes it still rides like an F250, not an F150.I like the design of these mounts. They index just like OEM. The bottom cup fits very well inside the the upper cup. There is even a rubber isolator with waterproof grease on the part of the bottom cup that fits inside the upper cup. This helps ensure that they will come apart if they ever need to be removed. OEM does not have this feature.Am I happy with these mounts? ABSOLUTELY! So happy I didn't have to pay $400 dollars for them. So happy!

My youngest son recently brought my 2009 Ford F-250 FX4 Super Duty 6.4L into his shop to check it over. He pointed out that the Cab Mount Bushings were completely corroded and missing. He recommended these aftermarket bushings as replacements for the original Ford OEM bushings, which had over 240,000 miles of use.While the original bushings are hard to access and need a torch to unbolt due to the Loctite Ford uses in the assembly, after an evening of work, he managed to replace all the cab bushings with these new ones. The quality of these new silicone bushings from E-colboy seems to match or surpass the OEM bushings.The new bushings look good and are noticeable with the yellow color, while the old bushings were missing. After replacing them, the truck drives like a new vehicle; the vibrations that caused a constant rattling noise before are gone, and the truck rides better than it has in years. Having these installed makes this purchase well worth the money spent.This set came with all the installation hardware needed along with instructions.

they installed easily. seems to be better than the OEM. I decided to try these instead of the premium ones for 400-500$ and I am pleased with how well they look and perform for a fraction of that.

Fits right

Installed these on a 2015 F-250 XL extended cab. Complete process of removing old ones and installing new ones was done in about an hour, thankfully rust wasn’t too much of a problem. Had to use jack to raise cab high enough off frame perches to facilitate removal and install of upper half of bushings. Use heat to loosen up locktite on bolt threads and use a decent rust penetrant. Overall the look great and do the job, hopefully the last longer than the factory bushings.