3 in 1 Universal Car DPDT Momentary Power Window Switch Power Door Lock Control

I purchased the switch to add to the universal power locks kit. I was able to add this into the kit I purchased to have a lock/unlock switch inside the vehicle instead of using the included key fob or manually unlocking the door from the driver side. Only needed one, but now I have extras just incase one stops working. My universal power lock kit had an additional brown and white wire used for a switch. The center terminal will illuminate the switch, the two next to the center terminal are the ground, and the two outside terminals are used for the brown and white (color was specific to my module that came with my kit); just swap the brown and white as needed when making sure it unlocks/locks the right way. The color is red when luminated which is nice because my window switches are green. Seems like a great switch for what I am using it for.

Quality looks and feels good for the price. I ended up returning them as the would not fit in my intended location.I would recommend them

Perfect for what I needed

Need wiring diagram

This is exactly what I need. Problem is, there's absolutely no wiring diagram so I had to pull one apart to see what was what. I still don't know what one of the pins is for. Also, this will only work with the internal LED if you need a +12v output. In my case, I needed a ground output, so I decided not to use the internal LED.Also looks like one of them was returned, as it's all scratched up and clearly someone tried installing it before. That's the one I decided to open up for examination.

Used these for an add on power door lock system. I wired my 2 wire actuators with the 4 relay system and negative / ground activation signal. "load tested" these switches. the center tang was connected to the vehicle ground and the outer most 2 tangs were the signal 'outputs', one for lock and one for unlock.

found the pin out online and drew up a diagram on how I'm using them. The switch drawing should answer how the contacts make/break at least. All switches work flawlessly.

The media could not be loaded. Keep looking. This switch is NOT compatible with the 2014 Nissan Rogue SE.