Retractable Hard Tonneau Cover Fits 2009-2026 Dodge Ram 1500 5'7'' Truck Bed (Classic & New Body)| No Fit W/RamBox or Stepside Model/Multi-Function (Split) Tailgate (Ram 1500, 5.7 FT)

Product was great, you definitely need two people to put it together. It is wonderful works just as advertised. I really like the look on my ram 2500. I do recommend this tonneau retractable cover. Takes a bit of space away but the sacrifice is worth it. I may put one on my ram 1500 short bed. The seal is good and it’s rained a a few times but no water has gone in. The lock is a bit tricky if you don’t read the instructions but once you figure it out it is easy. Installation was easy quality is good and fits very well.

This cover has transformed our truck. The installation was easy and the video instructions very clear. The quality of all the components is very high. Provides sturdy base and security. All the seals are tight and with the drainage connections expect to remain completely dry. Took me a while to figure out the lock but that was user error. There is a video which explains how to operate which again was great. Highly recommend and very happy.

Fitting the latch to lock is pretty difficult. The canister lock can jolt open during travel. Build quality is good. Lanyard works well.

The bed cover was nicely packaged. The parts were in a bag and were clearly labeled. The parts and the cover itself look and felt of good quality. I have a 2022 Ram Rebel. After getting the bed cover installed, I realized, it so much easier than the manual instructions. I watched the video that's listed on the amazon website for this bed cover, and it helped a lot. That video pretty much shows you all you need to do to get it installed. The hardest part of the install was installing the Cover cabin because the screws and the holes were not aligning. There was not much slack to move it around. So, the trick is not to position the cover all the way to the back window of the truck, leave a lot of space so you can install the cover cabin from the front. Then install the 3 screws per side, then you can slide everything into the correct spot i.e. back window. Some of you may not have this issue depending on your truck. After installing everything, I was able to function test without any issues. You can lock the bed cover without a key and I prefer to leave it unlock because the truck tailgate will be locked and the only way to open the bed cover is to first unlock the tailgate. So I guess, locking it with the key is a secondary security. The only issue I see is if you didn’t lock the cover all the way and you’re driving and it opens up. I also took it to the car wash and after, there was a little bit of water at the tailgate area. This is no big deal for me,‘because the car wash I use has the strongest pressure water spray I’ve ever seen lol, but normal rain will not get in. I took a for test drive for a day and it held strong, no rattle and it was as if there was no bed cover at all. I'm still monitoring my MPG but so far, it doesn't seem to have any effect. Overall, I highly recommend this cover. Update as of March 2026: So far the bed has been holding up pretty good. An important tip: clean the drain once a year. These are the drain under the base of the bed that’s at the front, basically the section that the bed folds to. Underneath there is the drain. You will have to remove the 3 screws on each side that holds the bed, remove the black drainage thing, clean the drain with a wire. Then test it, get a bucket of water or run a hose and make sure it’s draining. This seems to be a butt but once you do it once, it’s really easy and still makes this bed worth it. If you live in a dry area, then I wouldn’t worry about this unless, you need there’s a lot of dirt and debris that might cloak up the drain. I only noticed it was draining when it was raining season. Once you do that, the bed will stay dry always. Update as of Jan 2025: Unable to Unlock: If you run into this situation, i.e. it seems you are unable to unlock, meaning if you try to pull the unlocking rope to the right, you don't hear the clicking sound and it seems it will break if you keep pulling to the right, then go to the company's website and it shows a video how to unlock it. Basically, you use your key and rotate the clockwise so the key hole is horizontal. Then, use the bed handle and pull the bed back i.e. towards the rear/you and hold it. Without letting go, press the key hole down (you might have to push it hard down), then it should slide back, or just push it back. I've only run into this unable to unlock twice. First was the first time I got it (June 2024) and now (Jan 2025). I'm not sure what caused it to get stuck but it was very cold. Update as of Aug 2024: My MPG went up. I’m averaging anywhere from 16 on regular driving. And around 17.5 to 18 when driving long distance trips. The highest I’ve seen is 18.7.

2025 Ram 1500 Big Horn. Packaged nicely and all small parts were neatly labeled and packaged separately. Installation was not easy but not super difficult. The hardest part was getting the side rails lined up with the top cover and the box that they are bolted to, lining up the grooves and slots while trying to put the bolts in. Once that part was done, everything else went smoothly. For Ram owners with the 5' 7" bed... definitely put in the optional aluminum "L" bracket at the front of the bed. I have owned a more expensive cover from a national brand, I must say that this cover seems superior to that one, especially for the price. Well built, sleek and I especially like the locking mechanism. I only worry about the single pulling point and strap strength. But I'll update as necessary.

The product is high quality but the instructions are difficult to understand, However, watch the QR Code videos included in the instructions (which are from a YouTuber complaining about the instructions then showing you the correct was to do the installation!!!).

I bought this for my 2024 Ram 2500. The directions that came with it were not very easy to follow, then watched the videos but the one was for a tundra. The fit is not the best either. After install and driving down the road the cover does not stay latched in the closed position. If I hit bumps it slides back to the 1st level open position. I was not happy with the product at all. This was also suppose to be a no drill, but if you want the drains to work properly you have to drill a holes in your bed. The lock push button does not work at all seems the insides are broke.

very well made cover, I had many covers over the years this one is really solid, if a roll up cover is what you need this is worth the money