PlayVital Full Set Protective Skin Decal for Steam Deck LCD, Custom Stickers Vinyl Cover for Steam Deck OLED - Black Silver Carbon Fiber

Amazing skin and goes with my set up and the Wave designs I got on my Switch & PS5. Now my Steam Deck feels more personalized to me. You'll need to be patient as it takes some time to align and put on. Recommend some tweezers. I only have one minor complaint and that is the speaker holes aren't all cut out when you put the skin on the Deck. But most of them are. Also, a few screw hole cutouts on the back aren't accounted for. So keep that in mind if you want to upgrade storage or get into the Deck. You are given two sets so if you rip the first or it wears you got back up. Overall though its easy to apply and re-stick if you need to adjust it. Easy to remove and no residue. High quality and a good price as well!

The skin was easy to install and took about 5 minutes. My photos don’t really show off the color as well as it really looks, as my iPhone wouldn’t adjust the exposure correctly but the skin is beautiful. Like other reviews, the back button skins. Didn’t want to peal up easily but I used a craft knife to lift them carefully and they came up easily. There were two skins in the package so you don’t have to fear if you damage or mis-apply one. I accidentally stretched one corner and it wrinkled slightly but not enough that I’ll replace it just yet. I’ve not used Dbrand so I can’t say how these compare but I’m extremely pleased with the fit, print, and feel of the skin. I can definitely recommend them, especially for the phenomenal price.

I decided to try one of these skins because they're cheap and wanted to see if I could install one before spending the big bucks. I would recommend watching a video on how to install it, because it doesn't come with very good directions. It did come with two sets, which is nice if you mess up. I followed the video and didn't have any issue. It does take some time and patience, and you may need a toothpick to help remove some of the small parts of the sticker - like the speaker holes. Some parts stuck to the paper too much and were difficult to separate. The yellow part of the design were the hardest to see and separate. I think the design I picked looks pretty good, finer detailed designs might not. So far I haven't had any issues with it peeling, but time will tell. Edit - I didn't have any issue with the skin peeling or anything with a lot of daily use. I peeled it off on purpose and it didn't leave any residue at all. I'd buy this brand again.

Easy to install if you take your time. All the cut outs were there perfect fit for my Steam Deck Oled 512 GB. Beautiful skin. I’m going to use the scrap pieces with a scrapbook punch to create Sakura flowers to put on my case if you’re having trouble seeing the lines, hold it up to a light as you separate it from the backing paper and you will see exactly where you need to go slow for the narrow parts and if you have missed any cut outs. In the photos, I have not used the hairdryer yet on it.

Update Jan. 2024: I decided to give this product the benefit of the doubt and get it again, but the edges were still very sharp and stuck up in MANY places. It wasn't as bad as the last one where I had to use an exacto knife to cut away the sharp parts. -- Sure, it looks nice but in general this skin is crap. All of the edges point up for some reason(like the edge directly above the Steam Deck's screen or on the sides of the touch pad), resulting in some very uncomfortable sharp sides/ends. The package comes with two skins, and the first skin I tried to apply was absolutely awful. The second wasn't that bad, but the sides and basically any corner where the skin pulls off of it's wax paper always pull and point up even after installation. Don't buy from this seller.

Its been 4 years and this skin is still permanently stuck to my steam deck i even dropped it in water once. That broke my heart that day but i fixed my steam deck and this skin never lifted off once this thing is a beast.

The image designs are enlarged further than they should have been and are very blurry/pixelated. The stickers are also not cut properly to the shape of the steam deck and tear very easily. The placement of the cuts on the back side don't match the steamdeck design and make it look very cheap. The only reason. This is 15 bucks, is because they send two of the same design, because when you peel the sticker off the laminate it's attached to, there's a 50/50 chance you'll peel the design off the sticky side and ruin the whole thing. Sticker is also so thick that your hands and fingers will catch the sides and began peeling it the moment you use it. I felt so disappointed once I got both stickers on, because it immediately made my deck look like one of those cheap scam toys from Walmart that has 200+ atari/Gameboy games on it. Quality of Design- 2/10 Quality of adhesive- 3/10

This product is NOT as easy to apply as it is advertised and shown in the tutorial video. You need steady hands and a keen eye for detail because this will stick on there easily which can make easier to tear and fine adjustments harder. Both of my front panels tore a little bit when trying to peel it of the paper back. The edges turned out bumpy in some areas and some corners do not stick down as intended. They do give you two in case which is nice, I guess. The process of putting it on took my 45 minutes with all the adjusting, the first on tearing, deep analying the tutorial video to figure how on god's green earth the got it to align so easily, and attemping to smooth out all the bumps. Overall the skin quality feels cheap and might consider taking it all off if the tape-like edges keep bugging me. The only reason this isn't a 1 star review is that I will acknowledge there could be user error when installing but you shouldn't have to a intermediate gundum model builder to be able to put on this "easy to install" skin and have it nice and flush with the machine.

First of all, adhesion is brutal. I did manage to get the back one sticker on completely flush (to my surprise) and even after heating and the rest of it, there's still peeling that started a few hours later. The front one I gave up on as both (it comes with 2 sets) just didn't line up in some way. Whether it was the venting grills or around a button, the fit just wasn't there. I'm glad some people are having success with these skins. I'm not going to both with a refund but if I can save someone else from this, that's worth it

Applied without a problem , 2 decals in the package which is nice to have, only issue I am having is that decal strip on bottom and upper edge of screen keeps peeling away , have to constantly keep pressing it back which is annoying , maybe not sufficient glue ,otherwise good product

I would recommend this

Perfect decoration for the Deck. Looks beautiful after a little bit of trying. Luckily I got two sets.

Great!