Keyless Entry Remote Key Fob Compatible with Ford F150 F250 F350 Escape Expedition Explorer Ranger, Lincoln, Mercury, Mazda and More, Replacement for CWTWB1U331 CWTWB1U345, 3 Button (Pack of 2)

Programming was easy! Both keys programmed on the first try. One of the remotes "range" is a bit weak, but I'm going to assume it's a battery issue. The other remote is strong. Time will tell if they're durable. Plastic seems a bit cheap, but for $9 it's to be expected. Overall, super happy with the purchase.

This was one of the easiest things I've done to a car in quite a while. They just worked. Tested that they were working when I opened the package with a remote tester. All of the buttons put out a signal on both remotes. Went out to my new-to-me 2005 F-250. Got in. Closed the door. Turned the key on and off 8 times, ending on the ignition being on but not running. The locks opened. I hit a button on the first remote. The door unlocked. Hit a button on the second remote. The door unlocked again. Turned off the ignition and checked before I got out of the truck and both remotes worked. Walked away from the truck and they both worked also. Hit the unlock button once to unlock the driver's side door, twice to unlock all doors. Hit the lock button once to just flash the lights when the doors lock. Hit the lock button twice to get the lights to flash and the horn to sound when the doors lock.

Worked like a charm for my 2008 Mercury Mountaineer! The steps were to get in, close the door, open it and hit the unlock button on the door, then cycle the key on and off eight times leaving it in the on position on the eighth cycle. The door locks cycled, then I clicked the lock button on each remote one at a time. The locks cycle after you press the button of the remote, so you know you did it right. After that turn the key to the off position and you're done.

Worked great .. went to the website they listed and instructions worked

These work on a 2013 F150 XLT. Nicely. They are cheap and disposable and very easy to program.I gave 4stars only because they are not very durable; and you can only use them on the 1-unlock position otherwise your rear door locks will lock and not unlock again unless you repeat the FOB program sequence. It's not hard at all though.You can have up to four FOBs or keys on a 2013 F150.Steps to program your FOBs on a 2013 F150 XLT...1. Roll down your windows. Important. Remember.2. Get in the truck and sit in the drivers seat.3. With the door still open, press the door lock button.4. Close the door, press the door unlock button.5. Insert your main key into the ignition and turn the ignition from the 'off' position to the 'run' position eight times in eight seconds, without starting your truck. DO NOT START YOUR TRUCK.6. If you did it in enough time you will hear your truck locks cycle and reset. If not, just repeat step 5 until you hear the locks reset.7. When the locks cycle, you have eight seconds to press any button on your FOBs to program them. Any button at all.8. The programming is now complete. Enjoy.You have plenty of time. It's easier than it looks. It only takes about four seconds to do step 5 and three seconds to do step 7.

Worked perfectly on 2000 ford expedition. Found the program sequence for free online. Very easy to setup. Just turn key to right before starting then off back and forth i think 7 times and then u hear a sound from door and hit a button on remote and your done

These are easily programmed with the help of a YouTube video. Seems to be good quality and exactly what was needed.

Had to try three times to program but eventually got it to work I believe it was error on my part tho