BRCOVAN Motorcycle Phone Mount Holder with Vibration Dampener | Anti-Shake Handlebar Cellphone Cradle for Bike Bicycle Scooter ATV, Adjustable Fit 5.4 - 6.9'' Smartphone

This product is very well constructed. It is adjustable width to fit your phone and then you tighten the screws on the back so that stays fit. Make sure you give it just about an 8 inch clearance so it’s not too snug to fit in. The bottom supports are fixed, but the top is on a quite a heavy spring and you slide it up and in, and that holds the phone down securely in the position quite well. The double knuckle makes it easy to get the angle just right for viewing or positioning where you want it. To start out with I took out the two screws that hold the brake lever out and I put a 1” ball perch mounted (purchased separately) with two longer screws washers and black spacers, tighten them down, and it fit perfectly. The ball that I bought was 1 inch and it was the same brand as this phone holder so it was a perfect match. I am extremely pleased with this purchase.

This phone mount impressed me right out of the box. It's much larger and sturdier than I expected, and once it's tightened down, it stays exactly where you put it. Nothing feels flimsy about it. I use ball mounts on both my motorcycle and my e-bike, so I really like that I can quickly move this phone holder from one vehicle to the other without changing my setup. For reference, my Samsung Galaxy S23 with a rubber protective case is about the maximum size this mount will accommodate. It fits, but it's right at the upper limit of the adjustment range. Even so, once it's clamped in, the grip is extremely secure. I have complete confidence that my phone isn't going anywhere while I'm riding. If your phone is about the size of an S23, even with a protective case, this mount should work very well. It's solid, well made, and has earned a permanent place on my bikes.

Heavier than expected? Yup. Bulky? Yup. SUPER solid? Check. Great deal? Definitely! I love how it comes with a couple of different sized brackets for flexibility in mounting. I had to play around with where my iPhone 14 sat between the “claws” to make sure the top claws weren’t covering the camera used for facial recognition - it seems sliding it max left worked the best. You’d have to slide it max right if you wanted to use the main camera on the back of the phone. Very satisfied! It is easier to get the phone in than to get it out but i think it will loosen up!

Fully functional and durable , installs easy and holds phone securely to my 2026 Honda XL150L.

This is a solid phone mount. It has been on my motorcycle for a while and has not failed. It was easy to install and it hasn't loosened from the vibration of the bike & road. I'm pleased to say, this mount is bar none the best one I've had. Unfortunately, the previous one would loosened from the vibration so I had to make sure it was secure before and after each ride. If it was loose, I had to tighten it. I even had an incident with the previous one where my phone flipped over but because it was tightly snug in the cradle, it didn't hit the ground. I had to pull over and put my phone in my backpack. No issue like that with this one but if I had to say there was a negative, I would say I don't like that you have to lift the top of the cradle to put your phone inside. It's spring loaded, but that's what holds the phone secure. So, I guess it's not really a negative. I would recommend this mount because it's solid and should keep your phone secure.

I accidentally bought the wrong size for my phone so it doesn’t fit my phone, but if it was the right fit for my phone, it would’ve been a nice phone holder. I was outside of the time I was able to get a different size

This is perfect for a Goldwing with DCT... as long as you're willing to have your phone on the left handlebar. Simply remove the spacer that replaces the clutch that a DCT doesn't have, clip the tab that's meant to keep the spacer from rotating and put the clamp there. Easy, peasy. If you research the clamp, BRCOVAN recommends that it won't hold a phone with a Pop Socket. That's mostly true. However, if you removed the hard plastic attached to the rubber popout of the Pop Socket, their clamp will hold your phone nicely. Tip: when you remove the hard plastic cover, be careful not to break any of the 4 tabs holding it to the rubber popout so you can put the cover back on later. I like this clamp a lot better than the X-Grip Ram Mount. I believe it is more secure than using the "Anti-drop net" (rubberband) to assure the phone is secured.

This thing is super easy to install and use .highly adjustable and heavy duty

100% zufrieden Die Halterung macht was sie soll das Smartphone sicher fest Halten . Selbst beim Quad fahren im Gelände hält die Halterung. Die Montage ist sehr einfach und leicht .Die Vibrationen beim Fahren werden sehr gut abgefedert. Man kann das Smartphone drehen wie es einem passt .

I did quite an extensive review on iPhone holders for bikes that don’t shake your phone so much and this one the reviews were good and I have to say yes it is a really good product and I’m extremely happy with it!

Muy buen producto, muy seguro para el teléfono, protege bastante bien me siento muy satisfecho con los materiales!

installed on my cruiser it holds my phone well and the spring absorption is great.

Ich bin total zufrieden. Handy hält Bombe beim Fahren habe es an meinem ATV 1000. Egal auf strasse oder Gelände nichts ist Lose