ROTHENBERGER Industrial Mini Max Pipe Cutter 3-28mm

Most expensive 1,but solid piece of kit that would last me a lifetime for limited handyman plumbing.

I chose this as a "name brand" rather than a myriad of cheaper "no name" alternatives. I would suggest doing a little research online of how to use this tool but its fairly intuitive and simple to use. I would suggest DOING A PRACTICE CUT FIRST before you start using this. Just tighten the cutter onto the pipe using the handle with the blade located over the cutting point.. As you turn the cutter (ensuring you do not pull it to one side) you will need to occasionally tighten the handle a little but not so tight that it is difficult to turn. At some points the cutter and guide heads will heat up and expand so you may need to occasionally loosen the handle very slightly if it becomes difficult to turn the cutter. You need to use some common sense when tightening the cutter so it is reasonably easy to turn but is still exerting enough force to cut the pipe (remember the tool should be doing most of the work not you). As you get close to cutting through the pipe it will probably become audibly obvious (some "cracking" sounds may be heard) and you will need to slow down the process to finish off with a smooth cut and not use any force to finish the cut. Be aware that the "deburring" tool is utterly useless to smooth the finish unless you have about three hours to waste. I suggest using a metal file to finish off the cut with smooth edges if you need to. I have so far cut an aluminium MTB steerer tube (about 3mm tube thickness) and both ends of an MTB aluminium handlebar (about 2mm tube thickness) with perfect results. At no point did the cutting blade "wander" on the cut and it provided excellent results with minimal finishing required (far better and quicker than using a hacksaw). I shouldn't really need to say this but MAKE SURE YOU GET THE CORRECT SIZE TOOL for the tube that you need to cut. There is a spare blade located inside the handle but so far I have used the original blade three times with perfect results and spare blades are available from numerous sources.

Ich habe den Rohrschneider aufgrund der positiven Bewertungen bestellt. Für den Preis ist er für mich in Ordnung,weil er tut was er soll.Ich habe mir noch einen separaten Entgrater zugelegt, der integrierte ist absolut unbrauchbar.Der Schneider würde m.M.n. besser funktionieren, wenn das Schneidrad per Schraube auf das Rohr gedrückt würde und nicht die Laufrollen.Das Problem mit dem " Gewindeschneiden" hatte ich nicht.Alles in alllem habe ich mit dem Teil meine kompletten Wasserleitungen erneuert und ich habe noch nicht einmal das beiliegende Ersatzrad benötigt.Von daher,trotz der kleinen Makel, eine Klare Kaufempfehlung,ich würde den Schneider wieder kaufen.

Conoco parte de las herramientas de Rothernberger ya que trabajo de mantenimiento y por mi cuenta y la verdad que son herramientas de calidad.

tagli perfetti.Fa bene il suo lavoro. Rispetto a varianti più economiche questo è specifico per tubi di acciaio .Un'avvertenza. usatelo sopra ad un piano di lavoro perché il taglio è senza preavviso e vi casca tutto per terra.

Superschnelle Lieferung, alles perfekt kann ich nur weiter empfehlen

Comprado para tubería de hierro, de momento hace su trabajo.