NZXT F120 RGB Core - 120mm Hub-Mounted RGB Fan - 8 Individually-Addressable LEDs - Semi-Translucent Blades - High Static Pressure & Airflow - Quiet Operation PWM Control - CAM Software - Black

love it

Looks awesome. Easy to install. Quality is great. Cooling is great. Also super quiet.

Plug and play iof you have the NZXT RGB Hub or motherboard :)

Need a pcie cable from your power supply to the fan controller if you want to control these with the nzxt cam software. That is some diabolical engineering on their end. Whats also a menacing act on their end is releasing these fans without the new controller. These should have shipped with the controller and it shouldn’t be $50. Anyways, Why not just make it connect with two sata power cables instead of a pcie cable? Like every other controller I’ve used.the light bar on the side is not controllable. It runs off of the fan light. It is not separate. However, these are the cleanest looking fans I’ve seen and it pairs well with the new kraken. I only need one software open on startup now. I used to have Lian li Infinity fans. On paper, these perform slightly better and don’t look too “gamery”. Infinity fans look very gamey but every 3 pack of those comes with a controller included.Additionally, the cables that connect to the fans are not removable so if a cable stops working then the entire fan system will not work for that set of fans. A cable is less expensive than 3 fans. I don’t know why they designed it like this. There is a 5 year nzxt warranty for these fans though so I’m not too worried.The last issue I have with them is the led hotspots. Meaning, you can visibly see the leds around the fans when configured as exhaust. Also, it is not a warm white. It is more of a cool white making it look blue. See the color difference in the photos I added. EDIT:After googling it, if you add yellow to cool white, it makes it warm white. I’ve added my color profile to the photos so you can see the before and after. The base white color will look blue, you actually have to add yellow to the color hue in CAM for it to look as what I would consider a normal white.On the upside, only needing 4 screws for three fans makes it too easy to install which is a really nice design. normal 3 packs of fans require 12 screws.They are not very loud. I run them in the silent sound profile and the sound is never noticeable. If it is too loud, you can change the fan curve in CAM. Some people have said that tightening the screws into the fan too hard can cause a hum or a buzz sound.These are the best nzxt fans you can get but there’s better fans available without these flaws ex., Lian li and Corsair have “all in one” fans that are way better but also more expensive. But if you want to stay in the nzxt ecosystem then these are decent. By no means are they bad, but again, there’s better fans out there. These are about a 3.5/5 because of the obvious flaws.

Love it, easy to install and works great!

I have no complaints with these fans. I’ve been an nzxt fan for the longest because nzxt’s software is easily accessible to control my fans. Installation is fairly straightforward, I Love them

The media could not be loaded. The NZXT F120 RGB Core is a well-built fan with great static pressure and airflow, making it an excellent choice for cooling performance. The quiet operation and PWM control are standout features, ensuring your system stays both cool and quiet under load. I also appreciate the semi-translucent blades that help distribute the lighting evenly across the fan.However, the RGB lighting is a bit underwhelming compared to the ringed versions where the RGB is located on the outer edges. While the 8 individually-addressable LEDs are nice, the brightness and vibrancy don’t quite pop as much as I had hoped. For those who are RGB enthusiasts, the hub-mounted design may feel a bit muted, especially if you're looking for something to make your rig truly stand out.One important thing to note—if you're buying these fans used, be sure to check them thoroughly. I've received a few with snipped wires or RGB connector wires that were no longer functional, which is something you want to avoid. Double-checking this beforehand will save you from any frustrating surprises. DO NOT PUT THEM IN YOUR PC WITHOUT TESTING! Or you will end up like me with a fully cable managed pc with 2 of my 9 fans working... having to rip out all your hard work and start over after all that cable management.That said, the CAM software integration is intuitive and allows for customization, though the lighting itself just isn’t as vibrant as the ringed alternatives. While I’m happy with the fan's performance and overall build quality for now, I plan on switching to the ringed version in the long run to achieve the full RGB effect I’m after.