VEVOR 3-Jaw Lathe Chuck, 8'', Self-Centering Lathe Chuck, 0.16-8 in/4-200 mm Clamping Range with T-key Fixing Screws Hexagon Wrench, for Lathe 3D Printer Machining Center Milling Drilling Machine

This chuck is another fine product from Vevor. I purchased it to replace my older 6" 3 jaw chuck because I only had one set of jaws and was limited to holding my work pieces. The accuracy with the Vevor Chuck is good, and it is well built. This is probably the fourth chuck that I have purchased from Vevor, and all performed as expected.

very solid and good quality

This was the perfect upgrade to my Vevor 10kg weld positioner. This got rid of that tiny one that comes with the weld positioner and basically covers all pipe sizes from 1”-6” for people that fab exhaust, cold side pipe, intakes etc. I had to slightly drill a bigger hole in the slots that the original chuck sat on using a step bit. It was a little tight overall getting the bolts in but works perfect

The VEVOR 6" 3-jaw chuck is a great value if you already have a backing plate which fits your lathe. I was able to get repeatable concentricity of about 0.002" on a 1/2 inch OD test rod at 2" from the chuck, after removing and reinserting it. I would recommend disassembling the chuck and cleaning out all of the grit left over from grinding during manufacturing. I would buy this again, assuming that I didn't get an especially good one this time!

Fits my rollout wheel perfectly

Received the chuck and later I tried to mount it. The backplate has 3 screws holding the rear plastic chipguard and one stuck out(frozen=no move), Chuck would not set flat against spindle flange. after cutting area of plastic surrounding screw I removed the stub-didn't appear the hole had threads so screw was jammed in. Called VEVOR, nice people but "much talk about nothing" I would have repaired the chuck if they could have supplied the .25 plastic piece, nice people but stalling 2 day replies- Spoke to Amazon who professionally solved my problem and advised return item. Overall the Chuck is good appearing item minus the defect = UPDATE -Vevor delivered replace chuck a couple of days ago-neighbor picked it up to prevent theft and finally told me-lol,, I move VEVOR cust. service to 5 stars(5)

So far I am quite pleased with this chuck for my application. I've adapted it for use as a stationary (vs. rotating) round-stock holder for drilling and cutting operations in my drill press and radial-arm saw (with which I can even LIGHTLY cut metals with the right blades). Action is crisp and tight, suggesting close manufacturing tolerances. Seems obviously to be a high quality product,

Typical Chinese low grade product. I had to deburr every contact zone. The lubricant with which it came was black from fine particulates. After servicing, the gearing still feels horrible. You do not get what You pay for... Unless your intent is to buy chinese manure.

Bought lots of products from VEVOR and they are excellent quality for the right price. I just don't no how they do it. This 3 jaw 6" Self Centering lathe chuck is no exception. Quality made and smooth mechanism and great finish and accurate. I already have the 10" chuck / the 8" rotary table and many more and the quality is just the same so i've rated this 5 stars.

Ottimo, pensavo non ci fosse l'ingrassatore invece c'è anche quello

Mandarino 3 griffe. Ottimo ben fatto

Perfecto! Buen material

Cumple con los objetivos