SHOWA 730 Nitrile Chemical Resistant Safety Glove with Cotton Flocked Liner, Food Safe, 15 Mil Thick, 13" Length, Small (12 Pair)

I purchased these gloves after getting tired of wasting money on the gloves I had been purchasing at the local stores. The local store gloves usually were ill fitting, provided little to no tactile touch, and usually fell apart after a few uses, most often breaking when either putting them on or taking them off. They also provided very little touch sensitivity. I printed the sizing chart to determine my required size, and in my case it came out to Medium. I was pleasantly surprised when I received the gloves that the sizing chart turned out to be very accurate and the gloves fit me perfectly. No need to return and exchange for a different size. I purchased the gloves for use in mixing and handling chemicals for my yard work to spray insecticides and pesticides. But before I used them for that I had a mishap and had a major fall on a parking lot and completely scraped the knuckle side of my hands on the asphalt, to the point I needed to almost completely cover both hands with band aids. See attached photos of my bandaged right hand without and with the glove on. The problem now was that with both my hands bandaged up I could not get them wet while washing dishes or showering. So I started using the gloves when doing these things. The gloves have turned out to be a life saver, because they fit perfectly, are very durable and tough, but also provide an excellent tactile touch.. Their length is long enough to keep water from getting to my hands even in the shower. I am now very happy to have these gloves, and the fact that I have twelve pairs of them. Because from now I will not do anything that would get my hands wet without using a set of these gloves. So I have a pair in my kitchen for doing the dishes, a pair in my bathroom for showers now until my hands heal and for bathroom cleaning, and two pairs in the garage (one for car washing, and another for yard chemical mixing and application). In short, I should have gotten these a long time ago, it would have saved a lot of wear and tear on my hands.

Great gloves for sop making, fit well and good weight they are flexible and protect hands

Friend gave me a pair for resin printing. Turned out so awesome I bought a pack for everything I do. Resin printing? Thick. Durable. Long cuff. Lightly flocked so you don't get too sweaty. Nitrile. Can re-use (gone through a kg of resin, same pair of gloves). Waaaay better than those disposable 5mil nitriles that split every use. Automotive? Yup. All the same benefits apply - and you still maintain dexterity vs a cloth/leather/goatskin mechanics/tig welding glove. Household? Check nitrile compatibility (pretty sure it's as good as if not better than those yellow rubber gloves but haven't looked) with cleaners, but the lightly flocked lining makes them worlds more comfortable than the generic yellow cleaning gloves. And these things are cheap too!

I ordered these for my mom since she couldn't find any in the store anymore due to Covid-19. She fits a medium rubber glove (like Rubbermaid yellow ones) perfectly, but she wants something that comes off her fingers a little easier, so she wanted me to order x-tra large (which is about the size of my hands). After reading the reviews on this, I thought I would try a large as many people said these gloves run large. I'm glad I didn't order the x-tra large! These gloves fit me, and usually a size large is very tight on my hands. My mom still uses them, but her fingertips don't go all the way to the end of the glove fingertips, so it makes it a little awkward for some tasks. But she likes the thickness and the amount the glove comes up your arm. I took one pair from her and have used them a few times myself, and I'd say they are a good fit for me. There is still some extra space at the ends of the fingertips, and as I said I have pretty large hands, so these are made for some long-fingered people! I used them to prepare some very hot peppers that I grew and was canning. The peppers were burning through the nitrile gloves I typically use (like the thin blue ones you find in a doctor's office). These gloves worked perfectly, although I almost sliced off the end of the fingertip a few times because it sticks out past where my finger ends. But for durability and thickness, they are great. My mom hasn't decided if she will stick with this size or have me order a medium next time.

These gloves are good quality and have a good fit for my hands.

Durability is a major understatement! These last forever! I hand wash many of my dishes and use scorching hot water. These protect me from heat allowing me to sanitize things. The durability against sharp knives is unmatched. Prior to these, I was having to buy gloves almost weekly and tried every store brand and some online. I would buy a pair every week because sharp knives would puncture them and water dampens the inside. Nothing grosser than sticking your hands into stinky wet gloves that are growing bacteria, yuck! I have small hands & bought size small. These fit snugly but leave plenty of room to get my jobs done. I have a pair in each bathroom and also a pair for spraying caustic/toxic chemicals. Perfect for applying flea or ear mite medication to pets too. To say I LOVE these gloves is again, an understatement. I have saved so much money by not having to replace my gloves weekly. Thank you to the genius who created these because they really understand a true work glove. BUY BUY BUY!

This is my second order of these protective gloves. They are extremely durable & highly protective. I have used them for at least several years for washing dishes in very hot soapy water daily, cleaning bathrooms & litterboxes & general housecleaning. They are pricey, significantly higher priced than my original purchase, slight difference in size (a little smaller & shorter) but still fit comfortably & will last me for at least a few more years, so worth the price at about $3 a pair.

I work with diesel all day everyday and these gloves hold up great to such a harsh environment. Though I ordered the flocked gloves, I received a bag of plain, unlined gloves. Not the end of the world, but it makes taking them off and putting them on multiple times per day more difficult. The quality and durability of the nitrile makes up for that oversight though. I work on industrial diesel engines, so my gloves stay covered in dirty diesel, oil and grease from disassembly, clean fresh diesel for rinsing the parts and then a naptha based solvent for final cleaning. Usually, just one of these tasks will do in a pair of gloves per day, combine all three and I was going through multiple gloves per day. Then I found these. I've been using the same set now for a month and they show no signs of degrading or getting stiff and cracking, just some slight discoloration. Of course I do clean the gloves thoroughly every friday with warm water and soap and turn them inside out the clean the inside as well. Leave them dry over the weekend and they're good to go for another week. They are the perfect thickness for both dexterity and longevity. While you won't have the sure fine dexterity for small parts that one would with a more surgical type glove, they give plenty of feedback for nuts and bolts and such. I work around sharp edges and so far have not punctured them. I expected this pack of gloves to last me maybe two months and I think they might last me all year. I'd really like to try the cotton flocked version, would make them much easier to use. If you work with diesel, gasoline and other petroleum solvents, these are the gloves for you!