Spigen for Galaxy Tab S10 Ultra Case (2024), Galaxy Tab S9/S8 Ultra Case (2023/2022), Thin Fit Pro Kickstand and S Pen Holder Compatible with Keyboard, 14.6 inch, Black

I love putting cases on my devices as it can sometimes add features and the extra protection is nice too. But I felt like tablet cases had kind of died out in terms of innovation. Especially with these tablets that have external accessories there isn't a great way to store them without adding width or thickness. So I was pleasantly surprised by this case's thinness, but still have the ability to perform all the things a good tablet case should including a very sturdy kickstand. Speaking of which it's not meant for extended drawing session with heavy palm rest, it's still stiff enough to hold itself up very nicely.

Nice case, protects the tablet very well. Tablet sits nice and snug. However, the back panel feels a little flimsy and the joint is stiff. Would recommend it.

This is a fully functional friction-based kickstand. It's a fraction of the price that you pay for Samsung's magnetic mounting friction kickstand. This is a case that snaps onto the device and then has the kickstand built into the case. It is definitely not as sturdy or well made as samsung's, but it is much much cheaper. The pen holder clicks in but can be knocked out easily, not like the cover that the Samsung uses. It's definitely a little bit bulkier as well as it's a full-on case not just a magnetic backing. There is the option to remove a plastic clip along the bottom that exposes the tabs connectivity ports for keyboards. However if you're going to use a kickstand and keyboard just by the OEM. The fit is snug and feels sturdy.

If you were waiting for a V2 of the original Thin Fit Pro without magnetic interference with Spen input, this is it. Designed to work optimally with Samsung's own Book Cover Keyboard (the one with a trackpad), this case adds edge protection from bumps and dings that are absent from the back section of the Samsung keeb. No sags or case movement when properly installed (shove it in as hard as you can, but gently). The keyboard section should sit nearly flush (hair's width gap) against the plastic back of the case, again, if properly installed. Power and volume button actuation feels good. Some complaints include the blockage of some speaker ports due to the rubber latch mechanism, and Spen holder design - it's not as smooth sliding it in and out, but pretty serviceable. Fit and finish on the case's plastic could be better as edges don't look as clean as you'd expect, but that's just me nitpicking. Haven't attached the tablet-only section that they provide to protect the keyboard connector's edge without the keyboard, but it looks fragile. TL;DR It's a solid case that works well with the Samsung Book Cover Keyboard, and they fixed the magnetic interference from the S8 version

I like the case it protects the tablet also no issue with stylus like version 1. My only complaint is it doesn't work with all Samsung keyboards. Hopefully, version 3 is more compatible. Update 5-13-2024. I have had two of these. The plastic piece for the keyboard has broken twice. The manufacturer has replaced once. Go with another case. Changing to one 1 star

The availability of this case is why I bought the S10 Ultra. I really need an infinitely adjustable kickstand, like I have for my S8, S6, and even the S2. This is the ONLY solution out there that has a Surface-like kickstand. So how is the kickstand? It's great. Very adjustable, stays in place, feels extremely solid like it won't slide like some other kickstand. So what's the issue? First, the whole rest of the case is made with very cheap plastic. I've had it only a couple months and part of the case has already chipped and broken off, which impacts the second issue. For those of us not using with the Samsung keyboard (I think most of), the bottom part is a detached part that barely stays in when it was new and falls out all the time with the part that broke on my case. The final part is that the case doesn't protect the sides or front well at all. The sides are protected only by the cheap thin plastic. Also, there is no protective lip to the case at all, so there is no front screen protection period. So should you buy it? If you must have the adjustable kickstand, the answer is yes. That part works great and it's the only solution. If you are looking for a sturdy, protective case that has an adjustable kickstand, then the answer is likely no.

This case is nice, but there was some cons with this case. Cons: 1) Doesn't lay flat if you want it to for drawing because of the protrusions in the back that holds the s-pen. 2) There's barely lip for screen protection, so placing this dropping this face down on any surface. 3) The bottom strip that comes off is flimsy and easy to come off unintentionally. It feels like it will break easily. So Durability is questionable. 4) Mine didn't come with the rubber thing on the top right corner of the case to help hold the keyboard in a close position if you have one. 5) Lack of Portrait orientation angle. 6) Expensive @ $50. Pros: 1) It's thin and doesn't add much bulk except for the kickstand part. 2) Kickstand is superb and holds my tablet in a lot of angles in landscape orientation that i want it to, except flat. 3) Decent all around border protection so edges don't get scratch up as much.

Had this for over a year for my Tab S10 ultra. Its been great, just like the Samsung keypad stand which sells for $349. Its hinge is very durable. I don't need the key pad anyway. So for a fraction of the price of the Samsung stand, this works great

I really love my Spigen Thin Fit Pro Designed for Samsung Galaxy Tab S9 Ultra Case 14.6 Inch. Aside from the perfect fit, I really think that the built-in kickstand is the best in the market bar none. I have bought the extremely pricier original Samsung case but it does not hold a candle to Spigen. I have enjoyed it for a few months then I had a problem with a specific part. I contacted Spigen if I could order only that part that I lost and they quickly responded. I was already happy that they would send me the part that I needed but when I got the package, I was beyond amazed that they actually sent me the whole Tablet Case- for FREE!!!! Mind you the tablet case is nowhere within any kind of warranty but Spigen still sent me a complete tablet case. What an amazing and generous company. Thank you Spigen!

Book Cover Keyboard arka kapağından daha sağlam ancak 150 gram daha ağır. Sadece arka kapağı kullanıyorsanız gayet yeterli.

Perfect fit for tablet and protector

For some people it maybe costly but its stand is quite comfortable to adjust at any angle from zero to 160 degree. I already own original Samsung Galaxy S9 Ultra Keyboard cover and not a major difference between them. I would recommend it without any doubt.

Los materiales muy bien por lo que pague siento que los plásticos son muy delgados y en una caída seguro se rompen, pero a diferencia de otros su diseño lo compensa buscaba algo que se viera elegante pero que protegiera pesa un poco más que la carcasa de Samsung aunque es poco perceptible. El ajuste es perfecto uso la tablet Tab S10 ultra 2024 le he puesto protectores a los lentes de la camara y logro entrar sin problema algo que otras carcasas no me lo permiten y le queda muy bien lo único que si puedo reprochar es que en ningún lado me mencionaba que la compatibilidad con el teclado era de que tenía que quitarle una pieza y eso no me gustó adjunto las imágenes. Para ese precio esperaba que su diseño ya incluyera este tipo de solución no me veo estar quitando a cada rato una pieza y volviéndosela a poner, en mi trabajo eso pasa unas 20 veces al día y más que una solución me generó un problema de estar guardando esa pieza. Y aunque no se pudiera por diseño debieron ponerle un mayor grosor a la pieza es tan delgada que fácilmente se puede romper