Mini Metal Table Tripod

I really like this mini-pod, even though I only bought it for one specialty purpose. The extremely low-angle shot for the implementation of dramatic perspective is the exclusive point of making this purchase. It fills that purpose to the maximum degree. It is a wonderful camera accessory and has no cons to mention or observe. First, this mini-tripod is very solid, almost heavy aluminum. It makes for an extremely stable position at any angle and at any height. It locks into three positions with the lowest position being only an inch and a half above floor/ground level, which puts the center of a lens about four and a half inches from ground level. I had bought a smaller and cheaper mini-tripod, but it was almost all plastic. In fact, it was very lightweight to the point of almost being flimsy. More importantly, it would let my camera tip over too often and it could not get this near to the ground, so I returned it quite quickly. Second, the tripod head is also solid and is mostly metal, not plastic. It does not have a wobbly retaining wheel nut for attachment to the camera, as the other one did. They both have the ball head type mechanism and securely tighten down to keep a given position, however. Third, the length of this mini-tripod's legs are at least an inch longer the cheaper model I had bought. That model was not stable at all when the camera was tilted, whereas this Neewer model is quite stable. There is no danger of the camera falling over, no matter where it sits in relation to the legs. So, setting up for that specialty shot is quick and easy where you want and how you want! One could even get the camera and mini-tripod set up beforehand, then place it in position and make final adjustments. Further, the legs have much larger rubber tips which seves several purposes, including dampening vibrations. The upper part of these better legs are also covered in rubber, so for anyone who wants to use this mini-tripod as a selfie stick will find it very comfortable, even over long periods of time. Now, not to belabor the obvious, but this mini-tripod has limited capabilities and is designed with that in mind. In fact, both mini-tripods I address here are without any any extensions-- neither on the legs or between the legs and the tripod head-- there is no center post. This is only a mini-tripod, not a general-purpose, small tripod. I am not willing to compare any mini-tripod to any small tripod. Mini-tripods are specific to a desktop, tabletop or simple support for a camera or a wide wall, fence or other surface already at near eye-level height. You will need to pay a lot more to get a small tripod that will allow you to reverse the center post (to hang your camera underneath the top of the legs) or to allow attachment of your camera close to the ground. I decided I would only pay to meet my needs, not to have redundancy with existing equipment-- I already have two small tripods. Neither of them are suitable for my need for the very low-angle shots that I need in a limited number of projects. I also have a gooseneck monopod that clamps onto the edge of a desk for smartphone video that I might not trust to my camera. There's a principle I heard professional photographers advise to beginners and intermediates-- only buy some accessory that solves a problem or makes some aspect of your work easier. Rent it, otherwise. Spend money on more important or more helpful equipment or training, then. The sub-principle is only buy what you need, not going overboard at any time! Do not be a victom of GAS-- Gear Acquisition Syndrome. Anyone on a tight budget may have realized long ago that one only buys what one really needs, or to save money or to make money. It's not a matter of what you "like." Be frugal. If that's all you need for the next few years, then that should be all that you buy. Wait for a windfall to buy optional upgrades. So, I remind you to consider this product in light of its intended purpose and will warrant it to be good for my purposes keeping that in mind. It is a solid product for what I need to do, that's it. The cheaper model would suit part of my needs, but this one is far superior for that restricted purpose. It solves the problems of trying to shoot handheld and low-angle that I face. A more expensive model would give me the bonus of more features, but it would violate the principle and its corollary that I mentioned above. You need to do you. I offer the information, but you make your decisions. Well-recommended for my context, but your mileage may vary, as always. Be well. Be safe. A. D. Clark

This is easily the nicest mini tripod I've purchased for my GoPro. It's a simple, no-frills unit that is perfect as a handle or tripod. The aluminum construction gives it some weight and sturdiness that you won't get from the plastic ones. I'm always skeptical of the ball heads on tripods. I've had way too many that slip out of position after setting up the camera. The one on this tripod is one of the best I've used. It stays in place with very little effort and just has a high quality feel to it. Again, it's a basic mini tripod... but the best one you will buy for the price.

I got this for my iPhone because Joby Gorilla pods kept breaking on me. (You will need a special mount to use with your phone). This is the best mini tripod I’ve used. The legs click easily into one of three stops. This gives an even spread every time! The weight gives it a surprising amount of stability. The ball joint is amazingly smooth & locks in tight. The rubber grips on the legs & feet are superb. It’s very compact which gives it a small footprint, but also not much height. This works perfectly for what I wanted. So I have nothing bad to say about it. Its precise. It’s beautiful. & man oh man, it’s a great value!

This is my second one. They work great. Very steady and the legs will fold completely flat.

A fabulous set of legs for tabletop photography, paired with an almost worthless ballhead. It is heavy for its size, cast metal with elaborate spring-loaded catches on the legs that allow three positions to be selected and securely locked in. Heavy metal. I have a mostly plastic JOBY the same size that weights far less even with captive ballhead, but it cannot do what this pod can. USING A DECENT SMALL BALLHEAD I had, these legs can securely hold my Z8 (full-frame mirrorless camera) with my longest lens (180-600 telephoto) if its legs are flat. With an ultrawide lens, I can capture a large plate of food from a few inches away, using the mid and highest positions. With care, the camera does not fall over. Solid legs. So if you have a nice small ballhead or can find one, and do not mind the weight, these legs are worth the asking price even if you toss the head, which you must. The ball is not well machined and turns unevenly; the locking handle loose and uncertain. No inspiration there to hold much of a camera. But those legs are great!

This mini tripod has been one of the best tools in the bag. The metal body creates a sturdy frame. The legs can be adjusted so it's easy to capture different angles. More importantly it's tiny. This tripod takes up hardly any space so it packs extremely well. Absolutely a must buy for anyone who travels and creates on the go.

Purchased for mounting an electronic game caller. Very sturdy and NOT cheaply made. Easily adjustable legs and solid little ball head.

Great little tripod. Simple and very sturdy.

Just one down side is 360 smooth rotation is missing, Else its good one

Trépied génial car il est super stable et ne tombe pas sans être ultra lourd ! Donc validé je l’apprécie pour mon travail

Ik heb twee van deze statieven aangeschaft om speedlights op te monteren tbv macro fotografie. Niets op aan te merken. Stevig en gemakkelijk in gebruik.

Es un trípode con acabados de gran calidad; se siente sólido y el recubrimiento de goma en las patas lo hace muy cómodo para usarlo como mango o selfie stick. Es sumamente versátil para colocarlo en mesas, repisas o incluso en el piso, y me gustó mucho que las patas tengan 3 niveles de altura. Jugar con la altura de una sola pata permite lograr ángulos contrapicados muy creativos. Sin embargo, tuve que devolverlo porque el cabezal de bola no tiene la fuerza suficiente para sostener mi lámpara Molus X100 con batería. La posición se va venciendo poco a poco y no logra mantenerse firme bajo ese peso. Pros: Versatilidad: Múltiples alturas y ángulos, ideal para superficies variadas. Comodidad: El agarre de goma en las patas es excelente para usarlo en mano. Construcción: Se siente un producto metálico bien fabricado. Contras: Cabezal débil: No es apto para equipos de iluminación medianos o pesados, ya que pierde la posición. Veredicto: Excelente para cámaras pequeñas o accesorios ligeros, pero no lo recomiendo para luces tipo Molus X100 con batería integrada.

Neewer TP29. A perfect small tripod that will last. Ideal for table top support of cameras / phones. Easy to carry about in kit bag/jacket. Using mine to support phone camera with an additional adapter, (Not included), for attempting table top stop motion animation with the kids. Love the adjustability and firm positioning. Also had my DSLR and older digital camera on it without issues for filming birdfeeder in garden from windowsill. No long lenses though! Solid all metal construction, very grippy rubber feet giving firm hold. Positive locking 4 position leg angle adjustment. Fixed 1/4 inch standard threaded bolt for camera base. Removable, all metal ball gimbal with smooth 360deg rotation and 180deg tilt adjustment with 1/4 inch standard threaded bolt. One grippy metal thumb screw locks both pan and tilt adjustments firmly. Wouldn't be without it now!