Karltys Upgrade Screen Protector for 2024 2025 2026 BMW X5 X6 X7 i7/2022-2025 i4 iX 14.9-Inch/12.3-Inch Accessories [No Glare & Fingerprint] Tempered Glass BMW

Great quality. Perfect fit. Works amazing well, protects without obstructing or interfering with use.

Easy to install. Helps with fingerprints but I wouldn’t say it’s matte or anti glare completely but definitely not as much glare or finger prints as the actual screen. Fit was perfect for my 27 terrain.

This was a lot harder to install than a tablet screen protector. I usually mess up a few before I can actually place a screen protector. Took me a while to install. It fits perfectly which makes it harder to install. Wish there would have been a guide like the phone screen protectors. My one issue is that it's easy to trap dust. I got a few that left bubbles so I peeled back and used the adhesive to remove. Didn'tmess up the screen protector. There was a few bubbles that stay but not blocking any of the LCD display part, only the bessle but can only see it with a flash light. There were a few micro scratches that formed while trying to remove the bubbles. It's expensive compared to a phone or tablet screen protector or else I would have purchased more and tried again. I probably should have clean my car and and accidentally turning on the AC didn't help. And the length makes it awkward I have this 5 stars because it's not the expensive screen protector as there are more expensive selections. More expensive is not always better. It still looks really good despite the flaws and the fact that I did pretty good on the first screen protector, deserves 5 stars. Update: a day later, the stubborn bubbles disappeared, that’s what I hoped for and expected as it happens with cell phone protectors.

The screen protector is too big for the screen. It does not fit correctly so there are air bubbles that don’t go away. I am going to have to replace it with a different brand/product.

Fits perfect quality is great scratches resistant easy to use highly recommend

Worked out great for the price! I installed this on a new 2026 Ranger Raptor. Installation was pretty simple after wiping down the interior of my vehicle to make the area as dust free as possible and doing check on how the screen protector would line up with the display. Once the interior and display was wiped down I peeled part of the back of the protector and started to apply it from top to bottom while wiping with a hotel keycard to remove air bubbles. A few bubbles stayed behind and I slowly worked those out over a few minutes. Fit around the edges and corners looks good. One issue that I could point out and why I gave it a 4 star rating was because the wet wipe that came with the kit left a ton of streaks that were difficult to wipe off. Luckily I had lens cleaner for my glasses that worked much better at prepping the screen. Other then that, I am very happy the outcome!

This is an excellent screen protector for the 9-inch screen on my 2023 Honda Civic Hatchback. It took me about 20 minutes to do the entire install process and required some minor readjustments to make sure it was positioned perfectly to align with my screen. The price does seem a bit much for me overall, but even compared to a screen protector for your phone, that's still going to cost you around $10 and includes 2-3 smaller and thinner protectors, so I think the pricing for this is fair. It'd be much better if it had come with two for those human errors that seem to always happen. Once you receive the screen protector, there are a few things you must keep in mind: 1. Make sure to use the alcohol swab to completely clean the surface of your screen. I suggest having a microfiber towel ready to wipe the screen and make sure it’s completely clean before you try to adhere the screen protector to your screen’s surface. You can also use the piece included with the kit to remove any particles that may still be on the screen. 2. When you make your attempt to place the screen protector, use a flat tool or your finger to glide along the screen protector to make sure it adheres smoothly, while your other hand/finger holds the screen protector up by the lifted side. I recommend attaching it by its smallest side and use your tool or finger to slide along to make sure it sticks smoothly. My screen protector model would almost adhere on its own. If a bubble happens, you can either try to smooth it out or lift the screen up slightly and lay the screen back down. This item is very forgiving as long as you do it slowly. You are able to lift the screen protector off the screen if you happen to misalign it. I had to adjust it a few times, and I could use my finger to pull off the edge corner and then use that slight force to slowly peel away the protector from the screen to adjust where I wanted it to go. Do not touch the adhesive side, because you don’t want to potentially add any fingerprints to that side. 3. Take your time. You do not want this item falling out of your hands and having something stick to the adhesive side. If this happens, you’ll most likely have to get a new screen protector. Overall, I highly recommend this screen protector option for those that want to add that extra bit of protection to your infotainment screen. It’s very clear and allows the exact same response time to my touch inputs as the default touch screen by itself. I've only had this a couple of days, and I haven't driven very much. It’s a very reflective surface, so I’ll have to give it some time to see if I need to adjust my rating regarding its anti-glare capabilities. So far, when the infotainment is on, the screen is crystal clear.

Screen protectors were taped down in the box. They should have had the open end of the padded package taped and when i took it out of the box the one that goes in front of the driver fell on the floor and cracked. The tape that you use to tape it in place doesn't hold very well and the large screen protector kept sliding down. It had a bubble in the corner and in pulling it up to try to get the bubble out since the tape didn't hold vry well and the screen protector got caught on the radio knob and it cracked in that corner. The position tapes don't hold because as soon as i put at least 5 to hold it in place it still didn't hold. I also didn't see any bubble remover tool. It cracks really easy. I will learn to read reviews before purchasing next time.

Le queda muy chiquito a la pantalla de la tiguan R line 2026

Great product and fits snugly on my i4

Started peeling when parked outside

got one for my 2025 bmw m5 fits flush and i tested for fingerprints as well and it works perfect i would recommend wearing rubber gloves or some type of hand covering that you can still move your fingers in when applying thankfully i had the factory clear plastic they put on during factory building so i didn’t have to worry about taking OFF any finger prints but you wanna wear something so you don’t end up getting finger prints on the screen protector itself

Great fit, fairly straightforward installation, however it is not anti-glare, therefore a 4-star review. . I'll update this regarding the "Anti-fingerprint," properties, however it seems that it will attract fingerprints. Oh well, as long as it protects the screen.