Dynasty PROAUDIO WSA-5RP-PLUS Wireless Surround Sound Rear Speakers Kit with 2 x 100W Amplifier Built-in (Metal Chassis Design)

If you're looking at this then you probably don't want to run wires through your walls or under the carpet for your home theater. This set rocks. I bought it even though I thought it was expensive for what it is but the performance is awesome. There's no discernable lag in the sound. The range is great. I primarily use it in my bedroom but I did take it outside and played tunes from my main system and it held up fine! 30 feet through walls with no problem. The amplifier portion is probably a switching amp (class d) but it sounds very good. It's 50 watts per channel which is overkill for rear/surround channels but it held up fine as a primary outdoor amp. Careful with the volume though because it gets LOUD very quickly. Like in my room it's probably at 10%? There are no tone controls but it's a bassy sound. Very "full". The head unit sends the rear channel signal via RCA OR speaker inputs. And again. No discernable lag via either input. As a wireless solution it's awesome. As a basic stereo amp it is also awesome. I wish it had more of it's own features like bluetooth or streaming but then it would be a much different and more expensive product. If you're checking this out then you know what you need. It's not sonos. But it works so well for a wireless surround sound extension.

Well made. We purchased the high power antennas. No drop outs or interference in a house with 50+ Wifi devices. The transmitter is about 16 feet from the receiver, and the signal has to travel through us sitting on our sofa. No problems at all. Set up was simple. Plug & play. Having the rotating volume knob on the front makes it easy to bring up the rear speakers. But if you've carefully balanced the sound with Audyssey, you lose your set up with a swipe of the duster. The rear amp is powerful. & Gives good bass through our KEF table-top speakers. We've used other wireless rear amps that never really worked properly. We're really pleased with the power and solid manufacturing of this system.

I have a 20x20 room with hardwood floors and no easy way to connect surround channel speakers. The metal chassis feels sturdy and well made. The units connect and operate on the 5.2 and 5.8 ghz radio frequencies provide lossless audio. They are not wifi or bluetooth. Setup is super easy and only requires turning both units on. You'll see the blinking light turn solid in a couple of seconds when both units are paired. There is a paring button if you need to change from the default 5.8 ghz frequency to 5.2 or to pair again. The unit will find the best channel with the selected frequency. I don't think they rescan for the best channel once set which would help when they encounter interference. I've turned the units on and off and they've always paired within seconds. I have the transmitter sitting on an 8 foot tv console opposite ends from a mesh wifi 6 wireless router that operates on 2.4 and 5.2 ghz with 15 feet line of sight to the receiver unit. The units were working fine for two months, no interference or noise until now. I get an occasional pop on the speaker. I've switched the included antennas to +8db gain, longer, wifi 2.4ghz and 5-5.8 ghz antennas and occasionally will get a pop. I use my AVR preamp RCA low level connections for left right surround and subwoofer connections to the transmitter. It's set at zero attenuation. It's good to know that this unit allows -6 and -12db attenuation if your signal level is too high and causing clipping. I haven't tried using the speaker level connections, but given the choice, RCA usually provides a cleaner signal with less chance of noise or clipping. Once connected, I ran my AVR Audyssey setup and had to turn the remote receiver volume up half way. I was hesitant to use a wireless connection, but I am happy so far with this unit's performance. The occasional pop is annoying but random and doesn't happen often. When it happens, I'll turn the unit on and off to force it to rescan for a clearer channel and pair itself. You can find reputable online videos and reviews that provide actual amplifier performance data which convinced me to give this a try. A hardwire connection to your AVR is always best if possible. But you need to factor in the cost of quality speaker wire and how to hide it. This is a good, near lossless solution that provides 2x50 watts rms per channel at 8 ohms, 2x100 watts rms at 4 ohms. If you need more power, you can bridge the amp on the receiver to get 100 watts rms at 8 ohms for one channel! Of course you will need to buy a second receiver and also bridge it for a second channel if you go that route. It would be nice if the units automatically scan for a clearer channel if there is interference. It would be nice if the unit auto sense for a signal to turn on and turn off after inactivity. I think they do go into a standby mode because I've never heard noise or popping when I'm not using the AVR, but their blue power lights are always on. Good but not perfect.

There is a lot of concern about wireless surrounds. I bought this on the back of the reviews because running wires to my surrounds was simply not possible. Setup was easy. Hook up, switch on and go. The transmitter sits by my TV on the other side of my center speaker from the amp. Turned up the gain on the wireless receiver amp to max. FWIW there are 16 devices on my wireless network, including the Amp, PS5, Switch, Roku, and 'smart' TV. Initially, worked very well with the receiver placed on the floor next to the sofa with my surrounds on either side of the sofa. Transmission is about 12ft, not quite line of sight. Then I started to hear a few pops and bumps. These were more distracting than I thought they'd be. However, I moved the receiver to the side table next to the sofa (line of sight to the transmitter) and have not heard any artifacts since. The one slightly odd feature is that the Denon Audyssey room correction puts these speakers as 20ft rather than 4ft from the listening position, presumably because of the delay. Seems to work as it sounds amazing. Overall, therefore, with one very minor positional tweak, this has worked beautifully and flawlessly for the last 3 weeks.

So I waited to write this review a few weeks in. First impressions were great! Build quality is very good! Plugged everything in and it paired up right away! First few days I didn’t hear any difference from when I had my rear speakers directly connected. But after that I have started to notice a “popping” sound every now and then. It first started to notice it when I was watching sports, specifically soccer games. At first I thought the were just sounds from the crowd or something like that! Unfortunately I then started to hear this popping sound in all kids of movies. I really wanted to love this product, but it still needs to be refined! Especially for the price. It’s pushing 2 Klipsch rear bookshelf speakers. The receiver I’m using is a Marantz SR6014.

I have only been using this for couple of days. Im using it to connect my rear surround speakers. Its been working flawlessly. No dropped connections or popping noise. If this setup keeps working like this I would give it 10 stars. As long as you pay attention to which component is the transmitter and the receiver set up is very easy!

I simply could not make this work. It is wired correctly. Each device is paired to the other with a solid glowing blue light. When I attempt to configure the speakers using the Sony receiver to set them up, it does not recognize the speakers and terminates the Sony setup program abruptly. Incredibly frustrating. And, an incredible waste of time. I wanted these to work really badly, but they simply do not, given my setup with a Sony STR-ZA800ES receiver. Unfortunately, my only option is to return them and hardwire the rear surrounds.

On the good side these have low latency (I measured about 16.5ms) and are easy to set up. There is no noticeable distortion, and I did not have any of the problems others have reported with pops and odd noises. The availability of two frequency ranges is handy, and they are fairly easy to pair. The availability of both pre-amp and speaker level inputs is good. On the bad side the subwoofer channel does not work properly, it gets mixed with the other two channels. I see no sign that the right and left mix with each other, but send a sweep to the sub channel and it comes out the other two speakers, even if those speakers have no input (e.g. unplug the transmitter side input). Upon contacting the manufacturer they said that is by design, and recommended buying a separate transmitter/receiver just for the sub. Silly design to provide a sub channel then say it's not supposed to work. Really very silly.

Works great with no discernable lag at all. Easy to setup right out of the box. I have 2 Polk bookshelf speakers and a Polk sub-woofer connected to it and it totally rocks! Please also note, if one of the channels is a lot louder than the other, consult your AV manual on how to reset your receiver as this will resolve this issue.

I should have listened to everybody’s reviews about the poor connection. I just hooked this thing up and I really really wanted it to work, but it does not work at all. The Wi-Fi hooked up immediately, but I cannot get it to play properly. Constant signal dropouts. I tried to switch channels, but I can’t seem to do that. I really need some help with this thing, because it does not work at all. Constant popping and dropouts. The single is very poor. Both units are less than 11 feet away from each other and there is a full line of sight. I just cannot get it to work. I’ve been pissing around with it now for about four hours, very sad about it because I really want this thing to work. If you are the manufacturer and you are listening could you please reply back with some help there has to be something I can do to fix this issue I do not want to have to send it back. ——update—— I finally figured out what was causing all the issues. This is very important because many of you will have the same problems. Make sure the transmitter is at least a meter away from your router or Wi-Fi device. The minute you get it discard the antennas that come with it. Go on Amazon and buy two aftermarket Wi-Fi antennas and install on device. The device still has pops here and there but very seldom does it happen. I am now happy with the product and will not return it. I am giving the device three stars because it was such a hassle trying to figure out how to get it working properly. Advice to manufacturer put a better Wi-Fi antenna on this device and your reviews will improve Drastically. The class D amplifier in this unit is excellent.