Skechers Memory Foam Car Seat Covers, Air Cool Mesh Thick Seat Covers, Gray Two Front Car Seat Protector, Airbag Compatible, Automotive Comfort & Protection for Most Cars, Van,Trucks, SUV,Grey

The driver’s seat on our 2009 Toyota Yaris Hatchback started to wear out on the back of the seat and started to tear, leaving a small hole. After researching car seat covers for several days, I decided on these Skechers Memory Foam Car Seat Covers, which turned out to be an excellent choice. While this review focuses on a 2009 Yaris Hatchback, here are the front seat dimensions for someone who might be considering these seat covers. The front seats are approximately 19 inches deep and 20 inches wide. With the headrest detached, the distance from the seat to the top of the seat back is approximately 25 inches. The width of the seat back is approximately 6 inches at the widest point and about 3 inches near the top. If your front seats are similar, you can expect a good fit. The seats in a 2009 Yaris Hatchback have a non-removable cloth flap at the back of the seat which is attached to the bottom of the seat. Other year models may also have a non-removable cloth flap at the back of the seats. The fact that the flap at the back of the seat cannot be removed, car covers which use elastic straps and round discs to secure them aren’t going to work. The quality of the Sketchers Seat Covers is top notch at a reasonable price. Don’t let the price fool you, these are premium seat covers. The seat covers are well packaged. There are two seat covers, and two headrest covers which came out of the box basically unwrinkled, and smell only slightly which goes away after a few hours. There were no instructions, but installation is pretty straight forward and there are instructions on the product page. They take about 15 minutes or less to install. Remove the headrest if possible. Pull the seat cover assembly over the seat. There is flap which you need to push into the space between the seat and back. The instructions tell you to pull the flap through, but because the 2009 Yaris has a non-removable cloth flap on the back of the seat, this can’t be done. Not to worry, push the flap in as far as possible and it won’t be an issue. Pull the seat portion of the cover over the seat and tighten like a fitted bed sheet. Tie off the top of the seat cover, replace the headrest, and install the headrest covers. There is a two-part elastic strap which the instructions say to secure around the back of the seat, but I found this didn’t work so well and I came up what I feel is a better idea. One part of the strap has a hook (rough, scratchy side with tiny, plastic hooks), and the other part a loop (fuzzy side that catches the hook when the two pieces are pressed together). I took the strap with the hook and applied it directly to the carpet under each seat. I attached a non-adhesive hook strip from sew in Velcro to the loop strap and used this to secure the straps to the carpet. Velcroing the straps to the carpeting under the seats has enough elasticity to allow moving the seat without the hook coming apart from the carpet and helps in holding the seat portion of the car cover in place (see photos). I used VELCRO Brand Sew On Strong Strips 8 Black | 2.5in x 1in which are available from Amazon: https://www.amazon.com/dp/B0CH19JC3X?ref=ppx_yo2ov_dt_b_fed_asin_title) The seat portion of the car covers have a strong elastic and may hold without the straps. While each seat cover does cover the levers used to recline the seats, it doesn’t affect the operation of the levers. The Sketchers Memory Foam Car Seat Covers fit the 2009 Toyota Yaris Hatchback front seats like a glove. They look good, feel good, and they stay in place. The black and grey covers are a nice match for the dark grey interior of our Yaris. I included several photos in this review which show the seat covers under different lighting conditions. The Skechers Memory Foam Car Seat Covers are like custom made car seat covers without the custom car seat covers price.

These seat covers seem like they fit well and they look nice. The automatic seat adjustment is still easy to use. I only bought the two for the front seats but they go well with the original back seat. They're easy to install. Quality seems nice, especially for the price. These are used in a 2023 Trailblazer.

These seat covers are the greatest. They are reasonably priced. They were easy to put on. They look like they are the original seats. BUT a small hole developed on the seam of the driver's seat toward the door side. It is slowly getting bigger since it is rubbed every time one of us gets in and out of the truck. These seat covers would have easily been 5 star, except for the hole. Not sure what happened. Is it our fault or was it a weak spot? Don't know. But I would still highly recommend them.

I gave it a 5 star because they made these sketcher seat covers nice. I have a Sabaru Crosstrek XV 2015. I bought the rear seat cover to match the front seats I bought previously. Although my back seat is tan and looks great, I decided to match everything up. The back seat does not have any separation in the back for the foam to go thru. The material it self is really nice. Thick and cushioned. Wrapped around the top niceley and had head rest covers too. The bottom does not wrap and stay in place either. I will need to return them for something different.

I was extremely surprised about the quality of this product. It was easy to apply to the seats. They look great fit well good stability easy to install.

First of all, these are better than the overpriced generic prints you get at the local car parts retailers. Purchased for a 2008 Nissan Sentra. NOW, these are decent quality, are comfortable and look good overall. The install was a bear for this car though. One strap for the front have the velcro section almost rip off. The velcro/stretch strap are too short to get under the front seats and connected so I used strips from a velco roll I had at home to get these to connect under the front seats with tension to, hopefully, keep them from riding up or coming off. If it hold then, yay. The backseat cover is garbage. It also required me to use velcro to try and finagle it into place to hold as there are only cheap, stretch straps at the top and bottom corners. Not sure it is worth the cost.

Easy to install. Looks good and seem durable. Put in a 2021 Hyundai Elantra. Color black.

The seat covers are made nice , comfortable and the memory foam is great . Color is perfect . I recommend these . They come in a variety of colors .

⭐⭐⭐⭐⭐ Excellent comfort and easy to fit! I bought these seat covers mainly because I suffer from chronic lower back pain and spend a lot of time driving. I honestly wasn’t expecting such a noticeable difference, but they’ve been fantastic. The memory foam is incredibly soft and supportive without feeling too thick. It adds just the right amount of cushioning and has made my driver’s seat much more comfortable. My back feels far less sore after driving, and I’m able to stay comfortable for longer trips. Installation was quick and straightforward, and they fit my seat really well. The material feels good quality, looks great, and is very soft to sit on. If you’re looking for extra comfort, especially if you have back pain or just want a softer seat, I highly recommend these. They’ve made a huge difference for me, and I’m very happy with my purchase!!!

Good quality material ,comfortable and easy to fit.

Replacement of the previous and so far is much better than the last I have.

Se las puse a un Attitude 2018 y le quedaron muy bien, a diferencia de otras fundas éstas no quedan flojas ni se zafan cada que te subes o bajas del auto, bastante satisfecho con la compra.

Poor quality, there is no memory foam as advertised, definitely not worth the money.