myQ Smart Garage Door Video Keypad with Wide-Angle Camera,Customizable PIN Codes,and Smartphone Control–Take Charge of Your Garage Access Works with Chamberlain, LiftMaster and Craftsman openers,White

UPDATE II: After months of waiting for Chamberlain to fix the video delete function, they finally did it! I’m now VERY happy with ALL of my Chamberlain/MyQ devices and rate them 5 stars. I only hope the app developers learned a valuable lesson…IF IT AIN’T BROKE, DON’T FIX IT! UPDATE: my original post stands, and now for the reason I changed the rating to 2 stars: The software engineers and/or App developers put out a change to the already-working-just-fine MyQ App which removes the ability to BULK DELETE videos. You can only delete videos one-by-one, which, if you have 50, 100 or in my latest experience, well over a hundred recorded videos, you’ll spend 30-45 minutes or more, clearing videos from your storage account. The only other option is to delete them every single day, which is another pain in the burro. And here’s the kicker…Chamberlain has known for several months that this is a HUGE issue for users of their camera products, but has failed to fix the App in spite of too-numerous-to-count complaints on the App Store reviews. Chamberlain told me two months ago that they were aware of this problem and were working to resolve it. BULL! Two months later and it still isn’t fixed. All they had to do was issue another update, turning back the clock to the previous version. They aren’t fixing anything because, hey, they got their money for the cameras, so why fix anything? PREVIOUS REVIEW: This video keypad is fantastic in all respects but one, which I will address later in this review. Video quality is great, audio is crystal clear and easy to communicate with delivery people, etc. I’m glad I opted to upgrade from the basic keypad I’ve had for years. Setup was easy as well. Now for the shortcoming: although the battery lasts quite a long time (mine has been going for over 3 months before needing charging), it takes 10+ hours to recharge. That means no keypad or surveillance available all day (or night if you’re charging at night). And, to my knowledge and experience, the only way you’ll know the battery needs charging is a notification on your phone that the keypad is off line. To solve this issue, one must buy a second battery, keep it charged up, and swap batteries when the active one goes dead. That’s a $30 expense that I would rather have not had, but the alternative of no video surveillance and no keypad leaves no choice. And that’s why I gave this otherwise stellar device 4 stars instead of 5.

Okay, so set up was fairly easy, easy to switch out existing keypad. This is after you discover that you need to charge the battery for at least 10 hours. So after it was installed, I discovered that it does not work with Alexa or Google home. Seriously?! Appears that they failed to update the listing and web searches fail to mention that Chamberlain discontinued that service fairly recently. So you can only view from your phone. You can only get alerts from your phone . Wtf. So you will need to have your phone set up to receive notifications . Also , if you want to see past events you will need to buy a subscription. So you get a notification on your phone that there is motion , you open app, click on the icon and wait… nope nothing there… so what set off the motion? You may never know! ( even if you have the subscription you can only see up to a week worth and no way of downloading that I found) . Not a huge dealbreaker, I mainly wanted a new keypad and it’s nice that you can assign different codes for family members or temp codes for guests, repair persons etc. But here is where it all goes horribly wrong. I have only had this installed for a month!!! Battery life sucks big hairy monkey balls! It started off that I had to recharge the battery after a week. Listing said 6-12 months. So I contacted chamberlain. They said that I needed to adjust my motion sensitivity. It was already low and since I could never see what set off the alert anyway, I turned motion sensor off. Still had to charge the battery in less than a week. Called chamberlain again. They said it was because my wifi wasn’t strong enough. So I got a repeater so wifi to remote keypad 100%. 3 days later ( again, without any notification about battery low or dead) ( you only see an “unable to connect to keypad” when you open the app!! And it still doesn’t say dead battery it gives you 10 other things to check first!!!) Recharging battery is a PIA. You have to be out in the weather( think freezing rain and wind, heat, snow, etc.) you have to unscrew and remove from the keypad holder, remove the keypad, remove battery and charge for at least 10 hours then hook it all back up and reconnect wifi, reconfigure all settings, codes, adjust the camera … everything!!. Chamberlain states that the warranty does not cover the battery and suggests buying a new one . Which costs MORE than the whole damn thing. So… just another present for the landfill! I will never buy another thing from chamberlain as they do not stand behind their products!

I purchased this myQ Smart Garage Door Video Keypad for my home, and it has been a fantastic upgrade to my garage security and convenience. I love having the ability to open the garage with customizable PIN codes instead of worrying about carrying keys or sharing remotes. The wide-angle camera gives me extra peace of mind because I can see who is at my garage door and monitor activity when needed. The setup was straightforward, and the device feels high quality and well designed. I especially appreciate the added convenience for my family because everyone can have their own access code, and I no longer have to worry about lost keys or forgotten remotes. This smart keypad has made my daily routine easier while adding an extra layer of security to my home. I highly recommend it to anyone looking for a reliable, modern, and convenient garage door solution.

I’m going to review this in order of impressions, from unboxing to final installation. The packaging is functional and protective, but 100% utilitarian. You’re not going to confuse this for an Apple or Samsung product. The only instructions in the box consists of a QR code on a sheet of paper that links you to an online PDF. I’m old school enough that I like having a sheet I can hold, but it’s obviously not a deal breaker. The online doc is clear, and answers any question you might have—if at first you don’t think it’s on there, read through again since you probably missed it (like I did). The main unit is nice and solid, and feels like a quality piece of electronics. It’s comes with a protective plastic film on the camera, so make sure to take that off. The battery is both good and bad—I like that it has a USB jack right on the battery, so you don’t need to keep track of a random charging cradle that will inevitably get lost. I do NOT like that it’s an old-style USB-Mini jack instead of USB-C. I’m trying to purge my house of all Mini electronics, and was disappointed to have a new reason to keep my Mini cables around for the foreseeable future. Before mounting the pad, I set it up on my phone. I already had the MyQ app set up for my garage door opener, so I didn’t have to go through the process of setting up an account. Adding the keypad to my account turned out to be more of a headache than I expected. For some reason rather than just sending the WiFi credentials to the pad via Bluetooth (you pair with your phone during setup anyway) you have to enter in your password. I have a pretty long password, and apparently screwed up the first time, because it wouldn’t connect to WiFi no matter what I tried. I tried resetting WiFi via the reset button, and reentering the credentials, but that didn’t work either. I wound up having to factory-reset the pad and go from scratch on the setup. The factory reset process is in the instructions, but not where you’d expect it to be—it’s at the top of the section describing the LED colors and patterns. Once it was able to pair with WiFi I thought it had hung, and I almost tried resetting it again. It sat there slow-blinking a green light, which means it’s “connecting to the video cloud” according to the instructions, for close to five minutes before finally going to a solid green light and having it show up on my app. Over all, I’d give the whole setup experience like a 2/5 star review—it could have been more frustrating, but certainly not much more. What should have taken five minutes wound up taking most of an hour. While setting it up with the app I was in my office, about 4’ from my WiFi router, so it wasn’t a “weak signal” issue. I have Blink cameras around my house, in addition to other smart home appliances, and generally it’s easier to set up and pair than this was. For instance, with a Blink camera you just put the battery in, hit the “+” button in the app, you take a snapshot of the QR code printed on the device itself with the app, and it handles the rest. There’s no reason this couldn’t be just as easy, there’s even a QR code on the back that you never even use. At this point I mounted the keypad, which was the easiest part of the whole thing. There was only one spot I could reasonably mount it because of the design of my door and its frame, and it took all of five minutes. I held the mount up to where I wanted it with a small level next to it, and jabbed an awl into the wood through the screw holes in the mount. I drilled small pilot holes where I had jabbed with the awl, then put the mount back up and screwed it in with the included screws. I had gotten the adjustable mount as well as the fixed one, and wound up just using the fixed mount because it looked cleaner and I didn’t need the adjustability. The adjustable mount doesn’t look any harder to mount. As for the functionality of the device itself, it works like a charm. One specific use case has been great: I hate going for a walk with jangling keys in my pocket. I have a Ford Expedition that has a keypad on its door, so my go-to method when taking the dog for a walk would be to leave through the garage, unlock the truck with its keypad, close the garage with the opener in there, and relock the door. Then when the walk was over, repeat the steps in reverse. Now, I can click one button on the garage door keypad to close the door, and type in my code to open it back up. Easy. As I said, I have Blink cameras all around my house, so the camera on the keypad was not a selling point to me. It’s a $3/month subscription to MyQ to make it “save” videos, and I have no intention to set that up. The live video through the app is very clear and smooth, even though I only have 3/4 bars of signal to the keypad where it’s situated. I don’t believe there’s a way to fully disable the camera to extend battery life, but I have sensitivity turned all the way down. Over all I like this thing, because it makes one specific part of my life slightly easier. But, if you have MyQ-compatible garage door opener, and you’ve been wanting to get some security cameras around your house, this is certainly a viable option. Though, this keypad is still top notch especially for the initial price as the install is a breeze, the app makes setup and use extremely easy, and the breadth of features cover everything you could ask for. For those reasons I would recommend this to nearly everyone and if you don`t have an issue paying the annual subscription fee then it is a must buy.

I’ve been very happy with the myQ Smart Garage Door Video Keypad. The camera has excellent video quality, with a clear view that makes it easy to see who is around the garage. The motion alerts have also worked very well and come through reliably. I really like having the keypad and camera combined into one device. It adds another layer of security while still being convenient for everyday use. Setup and operation have been straightforward, and so far everything has worked as expected. Overall, it’s a great addition to a smart garage setup. Clear video, dependable notifications, and useful features all in one device. Highly recommended.

Overall this is a good product. It connects to my lift master opener with no problems. My main issue with this thing is that if it it stops connecting, you have no way to reboot it from the app or phone. You have to actually remove the battery to reset it. That is a major inconveniance especially if you are not home. Also it is of course another subscription to pay for to get the video. Overall 3 stars.

Here's the deal folks. This video keypad is awesome IF and ONLY IF you HARDWIRE it! If you are just going to use the batteries, forget about it. Get another one. But if you hardwire it, it is flawless. It works great. Has a great picture. The keypad works great. I have nothing bad to say. But if you're using batteries, you will be changing them often and it's just not worth it.

I was hopeful that this keypad would work out great. I was wrong. When it connects and doesn't have a dead battery, its fine. There is a keyword. When. Its only about 50% of time. Sensitivity is set down about midpoint. In less than a month the battery has died twice and already getting a low notifocation. I get constant messages that the keypad is offline even though the router is 20ft away (on a different floor) and an extender is 15ft away. I get 5 bars of wifi at the street 60-70ft from the garage door (the extended is on the other end of the garage), but the keypad has 1 bar 1/4th of the distance. Doesn't matter the wifi band. The chat bot for MyQ is awful. Repeated messages. Doesn't understand key phrases like router is 20ft away, battery doesn't hold a charge, etc. Pain in the rear to setup. Had to completely reset my Chamberlain MyQ garage control (which doesn't have an issue connecting). Had to switch to an iPad to setup because the Andoid app wasnt cutting it after more than hour of repeated attempts. Should have just stopped and returned it at that point. Android app connects to the camera only when it decides it wants to, not when you tell it to. Very disappointed. 2 stars for when it does work.

Buen producto y buen precio

No funciona bien no manda la señal bien al motor