Harpy Eagle Electric Oil Change Extractor Pump 12/24V 100W, Oil Сhange Fluid Extractor Suction Transfer Pump Portable for Automotive, Cars, Boats, Motorcycle,Trucks with Storage Case/Patent Pending

I recently tried to change the oil on my Mini cooper, only to find my oil drain plug completely stripped and rounded off. I was unable to remove the plug on my own. I had just purchased a premium filter, and oil. I did not want to have to bring it to a mechanic to have the drain plug replaced, knowing they would probably have to change the oil and almost certainly would not use my provided oil and filter. I decided instead to leave the oil plug in. I purchased this pump to remove the old oil. It was surprisingly easy and efficient to use. I did not experience any leakage. It was relatively speedy, only taking about 8 minutes to completely drain the oil pan. The pump seems quite sturdy and made to last. It is all metal so the pump has enough heft to keep it steady while it does the work for you. I did listen to other reviewers and used a heat gun to straighten the drain tube's. The included stoppers are perfect. The case however, is almost useless once you straighten the tube's. All in all this is a great pump and a great value! I highly recommend this as a buy!

Tried Harpy this morning. It worked well and was surprisingly easy to use. It quickly drained my old oil and without creating a mess or spills. I found the directions and the illustration inside the case lid were clear and easy to understand. But what got me the most was the convenience of changing oil. No crawling under the car and oil mess. You can do it do it almost anywhere since It runs off your car battery. The extractor and parts are solid. Worth getting.

The 1st one I bought sucked air. The seller told me to take it apart and reseal it. That didn't work, so I sent it back for a 2nd one. I used it to suck oil from Briggs and stratton 13.5 hp. Worked great. Tried to suck new oil from container to the engine. It drew air with the oil. It took forever to get oil from the container to the pump, and discharged oil was cloudy and mixed with air. I spent 5 minutes getting 1/2 quart from container to engine. I ended up sucking the cloudy oil and recycling it. The time limit expired from when I received it until I used it because of back surgery, so I'm stuck with it. It's going to the trash. Don't buy this piece of junk.

The media could not be loaded. This is an excellent pump. Super powerful. I own a marine repair shop and we deal with oil almost daily. I have used vacuum pumps in the past and this is a total game changer.There are features about this pump that set it apart from many cheaper options and is totally worth the extra money. There are also some definitive improvements they can make and i will list them which is why I snipped off a star. I have not been endorsed or received any benefit from this review. Its simply my hands on review and I own Socal Marine LLC.Firstly the kit does come with a dipstick insert tube - its very thin and the idea is to slip this down the dipstick tube to extract oil. This will drastically slow the process esp when the oil is cold only because the tube ID is so thin- however by drastic i mean it still pumps 10 times quicker than my old vacuum model!The speed is determnined by the INLET HOSE SIZE! I removed the quickconnect fititng and screwed in a 3/8 barb adapter, ground down the sharp barb edges for easy hose removal and used a firm wall 3/8 oil line (yes those soft clear tubes WILL compress - do not use these/soft hose on the in side!).Well heck this thing pumped about a gallon a minute of a mix of gear and engine oil-Now for the fun part - this pump is totally field repairable, what I mean is if you hit a jam like i did sucking up something other than oil, just pop off the top cover, remove gears and pin (it falls out easy), clean and re-assemble and you are off to the races again. Remember the small gear goes down groove first to seat over the small pin.This has a steel gear much like a chevy oil pump and it will last FOREVER unless you pump sand with it. It has very tight tolerances and works incredibly well.One thing i noticed after removing top cap to clear an obstruction (looked like teflon tape got in there), was I had to leave the 3 screws slightly loose and let it run slowly tightening the screws - if you reassemble and just tighten the screws you will likely just lock the gear- so tighten the screws slowly while the pump is running and untighten if it jams up then gently continue snugging them till it stays running with all 3 snug.It also primed INSTANTLY from a dead vertical drop if 3 feet- and instantly spurted oil out the clear tube which threw oil everywhere. The stupid plastic clip they provide doesnt even fit the tube in the kit!No reverse option but I might swap out the switch since its a DC motor, and also no strainer like in other kits.Also - the case is WAY too tight, once you have added 5/16 and 3/8 lines, its impossible to close. Also - the clip sucks and there are no p;ugs for the clear tube far as i can tell.Overall I am keeping this because i dont like returning used items based on small dislikes- everyone is trying to get by here and I dont need to return funtioning equipment putting a jam in their progress.Pros:Pumps like a monster - 1 gal / minute with a 3/8 inletVery power pumpPump is QUIET!Nice length of wires and decent clipsCase is niceStandard NPT threads for custom hose/fitting optionsField servicable - easy to remove/reassemble and continue onCons:No inlet screen filterCase is too smallNo reverse optionBlue clip does not fit outlet hose at all spraying oil everywhereI am very happy and hope this pump lasts a while.

5 Stars – Makes Oil Changes Fast and Easy!This Harpy Eagle oil extractor pump is amazing! It came fully assembled in a neat case, was super easy to use, and worked great with my car. The oil was out in under 10 minutes, no mess at all. The build quality is solid, and it’s very handy for quick DIY oil changes. Highly recommend for anyone who wants to save time and money!

The media could not be loaded. I’ve had this oil change kit for about a month and used it for a couple of oil changes. Recently, the pump stopped working, but I was able to take it apart, clean it, and reassemble it in just 10 minutes. It started working perfectly again! The pump is precision-engineered, which makes it reliable, but it’s important to only use it with engine oil (not fuel or coolant). I appreciated how easy it was to repair with just a 4mm Allen wrench and paper towels. It’s back in my toolbox now, and I’m glad I chose this product!