Electromagnetic Power Relay, 8-Pin 10A 110/120 AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ [Applicable for DIN Rail System]

AC coil relay works great at 120V, and the status LED is nice visual confirmation that it's working. The output has two separate circuits, which was useful for my particular use. I'm detecting if AC power is lost, feeding one output into a Zigbee contact sensor, and the other output feeds into a 120V UPS output which powers a light tree. I added a fuse to the coil side in case if the coil ever shorts the fuse will blow instead of burning up some wire.

I used this relay for my H&P KG-114 tower beacon that was made in the 1950s. The reason I used this relay with the flashing relay is because the flashing relay is only rated for 3 amps. This tower beacon uses closer to 10 amps. I used the flasher relay to engage this bigger 10 amp relay. This light almost maxes out this relay but it have been flashing thousands of times and I have not seen an issue. I later bought another one for the photocell. I highly recommend this product it works great and this light definitely pushes it even it enrages and disengages. Will buy more of these relays.

I use this with a smart plug so I can command a high power device on and off using my Amazon Echos. You'll want to get a DIN rail to mount it on, and you'll have to wire it for your purposes, but that's all completely normal for relay mediated control systems. I unreservedly recommend this DPDT relay system.

I used the 110V 8 pin relay to make a perfect and fast power out transfer to battery backup for my diesel heater. You cannot let the power stop for this baby when its running or the mainboard will melt.

works great , used on my hot tub to power circ. pump

My LG TV had an issue once in a while where the TV would hang up selecting menus. The cure was to unplug the thing then plug it back in. When I saw that this relay had a 110 Volt coil I rejoiced. I was able to wire the output contacts of this relay to my LG TV so that the TV was continuously powered. The relay coil was plugged into an Amazon Smart Outlet device. When I needed to unplug the TV I just activated the Smart Outlet via home Assistant which turned the relay on. This was equivalent to unplugging the TV. Turning off the Smart Socket removed power from the relay coil thus resotring power to the TV.

Resistance ymde buena calidad

Used this to make a Dusk to Dawn sensor into a Dawn to Dusk Sensor and it worked perfect.