🔧 Seal the Deal with Confidence!
PVC Trim Adhesive and Sealant White is a high-performance, eco-friendly adhesive that provides a quick and efficient installation for PVC materials. Its unique 2-in-1 formulation allows for both adhesion and sealing, making it versatile for various substrates. This product is VOC-compliant and designed to resist weather elements, ensuring long-lasting durability.
T**E
Great Caulk for Larger Gaps!
This stuff is such a pain to work with compared to regular caulk, but the results are absolutely worth it! I purchased this to secure quarter round along the base of a bathtub instead of using finish nails and needing to patch and paint. I applied according to the directions and haven’t had any issues since installing several weeks ago. The adhesion is strong, and we held it in place for 10-15 minutes until it seemed to be holding on its own. Since I had so much left, I decided to use it to also caulk the baseboards in the bathroom, and it’s my new favorite caulk for larger gaps… after several weeks of temperature changes and bathroom use, there is no cracking at all! Cleaning up during installation is low key a nightmare… it’s soooo sticky, but I think it’s worth it for a great finish. It’s much easier to peel excess from PVC once it’s dried.
C**Y
Works as advertised; easy to apply
I needed to attach 1.75”x80” PVC trim strips vertically to several sets of wood French windows to create a weather-resistant overlap, and discovered this product when watching a YouTube video about how to attach PVC to wood. I sanded the target areas down to the wood since I didn’t want to risk the adhesive not sticking to the (who knows how old) paint, and the product worked flawlessly.Since I didn’t know how thick the product would be, I bought myself a slick new caulk gun with an adjustable thrust ratio, but that turned out to be overkill. This product was no harder to apply than typical latex sealant. It went on evenly and smoothly. I did end up using the higher thrust ratio, but that was because I wanted to have better control over how much sealant I was applying. (Okay, I admit it, I also wanted to justify my new caulk gun since it is super-cool and I wanted to keep it.)The working time of the adhesive was fantastic. Lining up 80” pieces of trim with only two hands can be a challenge; this product provided enough immediate grip to hold the long PVC strip in place, but gave me plenty of working time to slide each piece of trim back and forth a tiny bit to make sure the adhesive was spread across the back side of the PVC and also to make small adjustments to get the alignment as close to perfect as possible. I then secured each piece with spring clamps and left them to set for about an hour. The result was a really strong bond. Although it was probably unnecessary, I also ran a small bead of sealant up the edge as added protection against water penetration.If you’ve never used this type of adhesive, don’t be as intimidated as I was. It turned out to be pretty darn easy and the results were excellent.5 stars.
A**R
quality
This product is excellent adhesive and sealant for Azak composite trim as well as an excellent product for vinyl clad exterior windows and door when the vinyl clad is coming off the door or wood substrate. Adhesion is excellent and it also seals.
T**T
The best vinyl to vinyl (pvc to frp) adhesive on the market.
This worked fantastic. The only adhesive I found that would make a vinyl tub surround stick to frp panels!!
N**A
Very Good for PVC Boards.
Fantastic sealant/adhesive for PVC. Smooth application. Good balance between work time and cure time. Color blended well with the white PVC board. Hides my sloppy cut work.
S**0
Changes to directions
Product works great but directions leave much to be desired. They state to remove the nozzle and cut the tip when it should say UNSCREW THE NOZZLE by twisting it off, then cut the tip. Once I figured this out, it worked great and flowed easily. My application was adhering PVC to wood and it worked perfectly.
S**.
Great Hold and Weather Proofing
Used this to install window stops and window drip trim for retrofit window installation. Set up fast and didn't slide around. Still caulked the windows out of habit. Easy to use and cleaned up without sticking.
M**Y
To hot to handle
Not sure how to start this review but I have used this product before with great results. This time I'm not sure if the product is any good. I live in NV. And the product was delivered to my mailbox outside, (thank you very much), when I found it, the tube was 104+ degrees. Buy the time I retrieved my temp gun, went down to 103.8°. I hope it's still good once it gets to room temp. I'll let you know. Next time put next to front door in the shade, thank you. Only 3 stars for preheating my caulking before I used it.
Trustpilot
1 day ago
3 weeks ago