TEAMGROUP T-Force Delta RGB DDR5 Ram 32GB (2x16GB) 7200MHz PC5-57600 CL34 A-DIE Desktop Memory Module Ram for 600 700 Series Chipset XMP 3.0 Ready Black - FF3D532G7200HC34ADC01

Plug and play load into bios, enabled XMP, zero issues, stable. Can likely push these much further with manual tuning. Intend to get at least 7433 from mine with much tighter timings, but maybe I'll get lucky and get 7800 (active cooled). Rig info: CPU: 13900k Mobo: z690 MSI MEG ACE BIOS version: " 7D27v18 " 11/11/2022, 1.80 I was also going to include Thaiphoon burner info, but for whatever reason it was being buggy and I don't feel like messing with it, perhaps at a later date I'll go back and do so. Memory Clock: 3,600.0 MHz Memory Clock Ratio: 36.00 x Tcas: 34T Trcd: 42 T Trp: 42 T Tras: 84 T Trc: 126 T Trfc: 574 T Command Rate: 2 T Gear Mode: 2 Update 1: So after a day of tinkering I've found that even slight overclocking elsewhere greatly impacts the stability of these, I was unable to get them to go up past their rated with manual tuning, which fair enough they're not advertised to. However the second I started messing with CPU overclocking things started getting unstable. I'm able to run them at 7000 with the CPU overclocked, further another who have purchased the same set with the same CPU, with the next generation of the same motherboard (Z790 meg ace) is telling me he cannot get his over 6600 With so much variance I'd have to advise sticking to QVL ram for DDR5 and even then you're rolling dice, this appears to be CPU side issues for the most part, not Ram quality or silicon lottery Update 2: I've since pulled these apart to get them in some aftermarket heatspreaders, figured I'd post what Teamgroup does for their cooling solution for anyone interested. TLDR They use adequate thermal solutions, but the heatspreader is completely inadequate. (Stock) Just going bare dimms dropped temps by 4°c, and aftermarkets, and aftermarkets by 13c (I used Bykski Copper Shields) Update 3: I've since swapped off of these for G.skill 8,000s, but I was able to take this kit up to 7800 with the Bykskis on a 14900k+Encore, and with the same CPU on a Z790 ProArt up to 7600. Not bad for what is now a relatively cheap kit, if you know what you're doing

Works well, looks great. I’ve got a pair of these 16x2 / 32 on an MSI Pro Z790 with a water cooled 13900KS. Very stable at stock settings, I’ve tried both profiles and they were also very stable. The 4 M2 drives in this machine are all Teamgroup as well. Really good stuff and reliable too.

Great memory for 10mo until one of the sticks died. Things like this happen so I’m not too bummed as of yet. Submitted an RMA so I’ll update the outcome from that experience. Otherwise the 7200Mhz XMP profile ran flawlessly without any instability issues on a Z690 mobo paired with a 12900k.

I upgraded my machine from 32gb to 64gb. easy to install and computer recognized and synced with it right out of the box. rgb lights synced automatically and looks great. I bought the same memory sticks I already have, they perform well and are pretty fast.

Great product, it works as announced

I’ve been using this ram for close to a year and my digital audio workstation is blazing! Very happy!

Works like a charm

Trying to push these to advertised speeds just causes crashes no matter what I do. 6000 is the best I can do with stability, that's with all other hardware that should be able to support this. With that being said, they are still a huge upgrade from my previous RAM. They look great.

Ho provato a settarle a 1,435v e a farle andare per 21 ore di HCI stress test a ventole del case spente e hanno toccato i 59°C senza causare alcun errore, al voltaggio stock di 1.4v invece ho avuto qualche errore a circa 55°C e il che è comunque ottimo dato che altre marche sono instabili sopra i 45-50°C, quindi sono di ottima qualità e anche superiori ai kit DDR5 7200 a 1.45v che ho provato. A queste frequenze è importante tenere la temperatura bassa, quindi vi consiglio di attaccare una ventola sopra per essere apposto anche in estate. L'RGB, per quanto sia carino, scalda molto e ha poco senso dato che disattivandolo si guadagnano anche 5°C a seconda dell'intensità luminosa. Io come potete vedere in foto ho anche aggiunto sul lato sinistro dei dissipatori passivi per abbassare ulteriormente le temperature. Le ho overclockate preferendo frequenze più basse per poter abbassare un pò di più la latenza senza doverle tenere sotto i 45°C. Metto i risultati così chi è interessato si può fare un'idea: 6933 MT/s 1.43v CL-32 RCD-40 RP-39 RAS-32 WR-32 RRD_L-8 RDRD_sg-13 WRWR_sg-10 RFC-400 RFCpb-280 REFI-65535 6667 MT/s 1.44v CL-30 RCD-39 RP-38 RAS-32 WR-32 RRD_L-8 RDRD_sg-15 WRWR_sg-9 RFC-380 RFCpb-270 REFI-65535 Entrambi i profili sono rimasti stabili per 24 ore fino a 50°C I 7200MT/s stock possono cambiare poco rispetto i 6000MT/s, ma con questo overclock le prestazioni computazionali salgono di parecchio nelle applicazioni e giochi che sfruttano bene le RAM veloci. Se non vi servono memorie specifiche ad alta banda o non vi interessa l'overclock vi consiglio di prenderle tra i 6000MT/s e i 6600MT/s con timing bassi, più stabilità e meno sbatti.

Je mets 5 étoiles, car mon problème ne vient peut-être pas du produit. J'ai activé XMP dans ma carte mère, j'obtiens bien les spécifications suivantes "DDR5 7200 MHz 34-42-42-84 1.4v" mais dans Windows, j'ai des problèmes de stabilité et des erreurs dans OCCT. J'ai été obligé de revenir sur du 5600 MT/s. Je ne blâme pas le produit, car les raisons peuvent être nombreuses, processeur (i9 14900KS), deux dual channel installé (4x16), carte mère (Gigabyte AREO G Z790) etc...

Ürünler orjinal ve çok sağlam tavsiye ederim

Passe nickel avec un 12900k (C0) à 7200. Je n'ai pas encore vérifié sur c'était bien des A-die. Donc pour l'heure pas encore vu son potentiel en OC.

Ottima ram, funziona bene senza alcun crash o problemi vari, montata sulla mia scheda madre Gigabyte aorus elite x e con i7 14700kf a 7200mt, impostata sul profilo xmp1 in cl34. Buon rapporto qualità/prezzo