Dynamic Scan Start Up Hood Light Strip Sequential Flowing Turn Signal Lights Flexible DRL Daytime Running Car Led Light Strip Exterior, Dual Color Amber White Switchback 12V 79inch (1 Set)

Ive had this led strip installed on my truck for a few months now. Ive gone through storms and car washes alike and this led strip is still going strong. I read reviews that mentioned the device failing after a month so I was almost deterred but for the price if it ended up not working out, it wasnt a big deal. Glad I gave it a chance.

Uber cool lights. Bright enough to be clearly seen during the day and at night you cant miss them.Easy to install. Careful on the fuses. Take a picture of your fuses location. It was a nightmare for me as I couldn’t find an accurate fuse diagram for my 2022 Tacoma. Find any fuse for lights and tap them in there.Easy to install. Great looks. I highly recommend these.

The controller does work when it wants driving, it almost seems as if it has to "charge up" to properly blink. Blinks great when engine off and hazard lights are on. With a black truck at night and making stops this is very nice to have as it make a black truck that "disappears" in the dark visible and I don't have to leave it running.However I have lost about a 1/4 of the LEDS on the passenger side after only 6 months, and it even looks as if a couple of the LEDs actual shorted out as it has what looks like burn marks on the inside kind of like old Christmas lights did when they blew out. I am hoping the company sees this and contacts me as I like it and I get a lot of comments about it..... :-(I have installed these they are fairly straight forward, however my control has failed. It is not utilizing the amber blink function I have checked and rechecked wiring. I know its getting the correct signals from the turn lights but yet it has quit turning on with the blinkers.I have this completely installed, and tested. It was operating "correctly" however from the start there seem to be a glitch as the turn signal would revert back to white for a second and then go again. The timing was random i.e. it would do it every 3rd blink or 4 or 3 or 6. The white light and "start up" functions are working as expected.I just need a new control module that I can wire in to replace the one that I have to assume is faulty.ThanksTom Bellomy

The media could not be loaded. UPDATE #3Upon installation and inspection of my replacement strip from another Seller, I noticed the previous failure was MOST likely due to my error.I believe I didn’t check closely enough to see the hood was barely pinching the strip.This was 100% my bad.UPDATE #2Well, just 5 Days after the install the Sequential LED Strip has begun to fail. This is EXTREMELY disappointing!!! Prior to these, I had a CHEAPO $4.75 Chinese set from WISH that wasn’t quite as bright, but they were installed over a year ago and were going strong up to the day I replaced them with these.This will be returned, obviously. And I am decreasing my Review from 5 Stars to 1 Star.UPDATE #1The lights look splendid on my 2019 Tundra. Wiring was not difficult. However, the wires are very thin, and the Control Module seems pretty Light Duty.In preparation for long term use, I applied Clear Silicone to the Control Module box seams, wire input opening and also sealed each end of the LED strip! This is a MUST with any LED light installation in my opinion; as most fail secondary to water/moisture contamination.CON:There is Double Sides Tape on both the Top and Bottom of the LED Light Strip, as another Reviewer mentioned. This may cause the Red release tape to visible on your installation as it did mine.I ended up covering mine with black electrical tape; after trying Plasti-Dip spray first.ORIGINAL:I spent an hour online trying to search for some local 3M Adhesive Promoter. I NEVER apply adhesive tapes or Velcro without priming first with 3M Promoter.No one had the packets near by.I was disappointed.I figured I’d take a look at the contents of the box and check the quality. LO AND BEHOLD!!! There was 2 Packets of Promoter RIGHT there in the box!!!I am demoing the lights tomorrow, if they look good I will fully install them alsoI’ll check back with my test/install review update.

We love those lights they work Wonderful and I have a not seen anyone with those on their car

Make sure the controller box does not get wet they will stop working if it does.The controller box itself is not even water resistant there are massive gaps where the wires go in and out.

Let's start with the bad. My car's turn signals are inside of a housing and work on a relay. So the power to the lights there is constant. When they tell you to connect to the flashing signal, this wont work unless i drill into the housing and tap into the interior line that is past the relay. So this unit does not do everything that is is supposed to, for ME.However, as it stands, this is one of the brightest LEDs that I have seen and when it does work, it works perfectly. The install was simple. The adheasive is strong. the placment looks amazing. I just wish it bent a little better. The longer one is too long and the shorter one is too short, and I did not want to cut it for fear of messing something up.That being said, if you have a newer vehicle, (mine is a 21 VW) get this brand, but get the one without the turn signal. If someone in my group figures out how to get it to work, I'll update this review.