KEMSO 340LPH High Performance Fuel Pump for Subaru/Honda Vehicles, Replaces AEM 50-1215

Very good and responsive pump.. hood fit and works Great

I did some research before purchasing this and decided to purchase and try it out. I have a 2021 Can Am x3 120hp base model and have been upgrading it slowly. With the intercooler added and tuning it I was maxing out the injector duty cycle since the stock pump is different than the turbo r models. The fix is to either buy an upgraded pump from one of the well known aftermarket companies or tackle it yourself. Well I went this route and added in a relay for the added load since the ground signal normally routes through the ECM. Works great and saved myself $200!

I bought this pump with a little skepticism. Once it arrived i noticed how well built(not cheap looking) it was. Installed it in my 2007 Hayabusa and it works flawlessly!! Buy with confidence!!!

I have been a Diesel technician for 14 years and wouldn't recommend the installation of this into my fuel sender unit to anyone!Removing the sender unit from my Polaris Sportsman 850 was a breeze, but installing this pump into the sender unit, soldering the wires and butt splicing the wires for installation wasn't worth the time.It fixed my Sportsman 850 for 4 hours of riding, then the check valve in the pump went bad. Won't hold fuel pressure So now I get to do it again! And am certainly not buying this pump again!Waste of time and money!

There's no reason to buy a whole pump assembly when just your pump goes bad. This was pretty easy. If you're replacing a factory pump in a FX450 you'll need a couple of things. 1. 6" or so section of 1/4" fuel line. 2. Screen and mount off your original pump. This kit is a multi fit, but the pump is nearly identical physically to Husky's made in China oe pump. The screen that comes in the kit (there are several kinds) will not fit in the oe housing because of how it's shaped. Not a big deal if your oe one is salvageable.The section of fuel line you need is because the line in the kit is designed to remove the in-tank filter... Thought about installing an external filter, but decided against it. As soon as I installed it I rode for a couple of miles. Hopefully it lasts. My oe pump gave up the ghost because that awesome ethanol fuel turned to shellac in less than five months. Fresh tank of super u/l at the end of Dec. Middle of April bike wouldn't start... I pulled the pump apart and verified there was nothing else wrong with it. Just a nice coat of varnish over everything.

Works perfectly!! Used in my 2002 Lexus IS300. Easy install! I have put about 4000 miles on this fuel pump! Eventually going turbo!

Pump was a perfect fit for my 93 Grand Marquis. The pump comes as a kit with strainers and hoses. Only issue I had was with the rubber hose, it was too short. Thankfully, I had extra in the shop. Installed pump 2 weeks ago, I'm getting a strong 42psi at the fuel rail. My previous pump was worn out letting me down with 29psi.

Easy to install and the correct one was sent the first time.

Installed pump and replaced tank. Killed battery pressurizing system! After battery recharge started immediately and has been working as expected for a week now.

Me gustó que funcionó bien

Bought for an EFI upgrade on SBC. So for it’s working really well.

Fácil de instalar

La instalacion sin complicaciones, funcionan muy bien, buena respuesta al acelerador.