360FC Fast Drying Wood Glue (12x15.4 fl.oz)- High-Performance D4 Polyurethane Adhesive, Waterproof Marine Glue, Strong Adhesive for All Wood Types, Metal, Concrete, Ceramic | 15.4 fl.oz. 12 Pack

Don't buy. All bottles are less than a third filled. It's really closer to 3 1/2 bottles. I'm gonna return mine. I'll let you know how that goes, Update: I have decided to keep and use the glue. The seller did reach out to me but I ignored them as I chose to give it a try. My results are compared to GG. Akfix cures yellow GG vures white, not that the color has much affect other than an indication the formulas are different. Akfix is thicker ans GG is thinner They both are the same in strenght and cure times. These are the only difference I have noticed. So in conclusion they both are great to have on hand, in cold weather GG will flow better and will flow down into a hard to reach place as Akfix will hold better on your project. My only complaint is still the bottle. I lost a lot of glue cause the glue would push the cap off and there goes half the bottle. It did not mattet what way the bottle was standing. I found that standing it up right till the glue settles than put the cap on helps save that loss. Its really strong. I changed my rating from 3 stars to 5. I really like this glue. It soaks up epoxy resin real good too, when trimmed of course.

First, the bottle comes half full, but the amount of glue in the bottle is exactly as advertised, 15.4 ounces. I'm assuming they add inert gas to the upper portion of the bottle to prevent it from air curing. This glue behaves and performs much like polyurethane Gorilla Glue, except that it is much quicker curing, a little more airy in texture, and not quite as strong. I preferred Akfix PA370 to Gorilla Glue when laminating wood sheets and working with large pieces, or edge gluing boards for a butcher block. On the other hand, if I were joining boards with rabbets or picture frame style corner angles, then I would recommend something with a little more strength like Gorilla Glue or regular wood glue. Akfix PA370 cures by a reaction with moisture in the air and in the material. Wood materials in your home or shop typically have a moisture level of 6 to 14 percent due to fluctuations in humidity, and that is ample to activate polyurethane glues. You can also wipe a lightly damp cloth on surfaces before gluing. Either way, the curing time is minutes and not hours like Gorilla Glue or wood glue.

This product is excellent. Although I need to learn my lesson and use gloves when applying it. The glue doesn’t come off of your hands easily at all. The glue foams when drying but is easily cut away. I have used it with tables and wood nails successfully as well as some smaller craft wood creations.

I received this product and tested it on some foam board. It worked very well creating an excellent bond. I was comparing it to gorilla glue and thought that it was a little bit too thick. In fact, when I used it, I could not get it to flow out of the nozzle. I had to remove the cap entirely and use a stick to remove some glue from the bottle and apply it. I decided to try to thin the glue and read online that acetone Might work. However, after putting in just a very small amount of acetone to try to get the glue to flow better, I found the bottle the next day completely solidified and exploded. So if you’re going to use this glue be prepared for issues with flow and definitely, definitely do not try to thin it with acetone ! Don’t know if I will purchase it again because of the flow issues.

Great glue. Basically identical to original gorilla glue but this is much better price.

The glue itself is very good. However, the bottle is only half full. It’s like buying potato chips.

Mu y bueno

It dries white and foamy and there's only half of a bottle. Basically destroyed a project that had hundreds of hours into it. Is very disappointed