Teexpert Auto-Defoaming Epoxy Resin Kit: 2 Gallon & Crystal Clear

This resin has become my go-to for coating and casting projects. It pours smooth and self-levels beautifully, leaving a high-gloss finish that makes pieces look professional. I’ve found it needs a little warming to thin it out for easier mixing, but once that’s done it handles like a dream. Best part—there’s hardly any odor, so I can work without feeling like I need a gas mask. Reliable, versatile, and a solid staple for resin work.

This is my second time ordering this. I don't get many bubbles if I use a machine to mix or by hand. I let it sit for 5 minutes and it's ready. It does seem to be a little thicker that some I've used but I kind of like that. It is a pinch soft next day but it makes it easier to get out of mold. It gets super hard just leave it alone after demolding for another day. I will be buying this brand again....it's pretty flawless!

This product is good

***SECOND EDIT**** THE SECOND BATCH THAT THE COMPANY SENT TO ME WORKED LIKE A CHARM. I AM GRATEFUL FOR THE REACH OUT - AND THE REPLACEMENT PRODUCT. I HAVE BEEN ABLE TO MAKE KEY RINGS, NECLACES, AND EARRINGS. I DECIDED TO USE THIS PRODUCT BECAUSE IHAVE HAD PROBLEMS WITH BUBBLES SITTING IN THE MOLDS, AS WELL AS CLOUDING MY CLEAR CASTS. FORTUNATLEY THIS LAST BATCH HAS NOT HAD THAT PROBLEM. **** ****COMPANY CONTACTED ME AND SENT ME REPLACEMENT BATCH. I HAVE NOT HAD A MOMENT TO USE THE NEW BATCH DUE TO OTHER CIRCUMSTANCES, HOWEVER THE COMPANY HAS FOLLOWED UP WITH ME ASKING FOR PHOTOS OF THE PROJECTS THAT DID NOT WORK TO SEND TO R&D. HOPEFULLY THIS NEXT BATCH WILL BE PERFET. WILL UPDATE REVIEW WHEN I AM ABLE TO TEST PRODUCT.*** I loved the idea of the pump - for better accuracy in measuring the epoxy and hardener - I even bought two! NOTHING I mean NOTHING has set. I measured accurately, and even double checked my measurements after the first batch failed. I emailed the email address from the seller's information page and have yet to receive a response. This was referred by an influencer I follow on Youtube, and I feel he earnestly suggested this resin in good faith as I have followed his advice for over a year now. I thought that maybe my first batch was a bad batch, nope, opened the second batch I ordered and measuring extremely accurately, because of my results in the previous two pours. STILL did not set, everything is floppy. I hate to give bad reviews, because I understand how much reviews mean. I am just disappointed in the product - its results are different than the influencer was able to demonstrate.

This resin is very hard to use. It is NOT easy to remove all of the bubbles and there are more of them than I have seen with other products. When put in machine to remove bubbles, it just ends up with a froth of material. Even running it through 2 cycles is not effective. By that time, the resin is warm and starting cure process. I did get this at a sale price, but I wonder (based on other reviews) if this was the unsatisfactory product that many complained about and that the company (or Amazon) was trying to clear from inventory. I have used other Teexpert resins with good results. I am afraid to trust this one. I am updating this review and adding stars. I found out accidentally that I was using it incorrectly. Unfortunately, directions did not cover everything I needed to know. Do not put this in degassing machine; it multiples the bubbles and getting rid of them afterward is impossible. No need to warm the resin, unless your work room is cold. There did not seem to be too many bubbles after mixing, so I waited about 7 minutes and poured into molds. I had to let it sit unattended for 10 minutes. When I came back, one or two spritzes of alcohol got rid of the bubbles. The more you do to this resin, the more you will see bubbles. I found I can let it do the work for me. I use only shallow molds, it works for these. However, it is not good at top coating. You can see how it did not level at the edges on this shallow coat.

Very good quality resin All my projects come out clear and it self bubbles unless you use a machine to mix it then you have to bubble it yourself with a torch or lighter or heat gun. It works well for big or small projects takes in colors very well sets in 24 hours it’s able to demold after 8 but I leave it be until 24 hours it’s not sticky if you wear gloves when it dries it’s solid it’s easy to clean with diaper wholes I found that the Amazon wipes are sturdy without tearing but I add hand sanitizer or water to the wholes for more moisture as needed to help absorb slipping resin 10 outa 10 would recommend I use it over and over I think I’ve bought 12 gallons already from them

Hands down my favorite resin. About two yrs ago all the resiners on YouTube were raving about this product. Now because of other free resin they get so they will recommend it, this one seems to have been forgotten. I have no problem with bubbles as it cures clear producing a professional look. I have tried the other popular brand that is now being pushed and just haven’t had as good results. Teexpert has a great product.

I bought this product and it wasn't as great as I had expected, BUT the customer service team worked with my by refunding me and sending me more Epoxy Resin product with detailed instructions. I used the tips and am amazed at the difference in the results. First off, I am excited to say the bubbles were almost none existant in the mixture and final projects, work time was a good 30-40 minutes, and it takes color and keeps it! I would highly suggest trying out this product. I'm wildly impressed with outstanding customer service. This company did everything they could do to rectify my original problem. Proving that not only do they care about the customer, but they also care about the brand. I've never worked with such an amazingly generous and kind company. Buy it!! If there's a problem, the customer service team will exceed your expectations. I don't foresee there being any. Great resin and great customer service!! Thank you!!

The product is good but the packaging says NO SHIPPING COSTS. I was charged two shipping costs.