Gyeon Quartz Cloth Cancoat Evo 200Ml – Spray Ceramic Coating For Cars | Can Be Used To Coat Paint, Wheels, And Exterior Plastic Trim High Gloss Car

All things considered, price, ease of application, and effectiveness this is the best sealant I've used ever. Unless you are prepared to spend big bucks on a professionally applied sealant, it doesn't get better than this. Highly recommend. Update to previous review: Applied product to three vehicles Oct. 2025. It is now Aug. 2026.The two garaged vehicles are just like the day it was applied. The car that was outside thru a Wisconsin winter and half of a summer in the baking sun is still beading water. Tips for first timers: Prepare surface B4 applying! This is a must. At the very least clay the surface. If you see swirl marks or other imperfections buff them out first or you will just lock them in after applying the sealant. As for applying the product: #1-Don't over apply! This is easy to do but a little goes long way. It helps to have an applicator made for this purpose. They look like small foam bricks covered in tight weave microfiber. #2-Do NOT allow product to dry! Buff off Immediately. This means working in small areas at a time. Two foot squares is about right. Do not attempt to do an entire hood/roof/door/qtr panel in one shot. #3 Have several microfiber buffing cloths and change them out as needed. Don't use old diapers/tee shirts/cotton towels. Use microfiber polishing cloths made for this purpose.

La calificación es por el estado en que llegó, adicional no sé si esté rebajado, el bote no está lleno, pensando en devolverlo antes de usarlo

This is an excellent way to protect your vehicle with a ceramic coating without too much work. After thoroughly washing my car and making sure there was no residual gunk on the paint, I followed the directions and it came out looking great. There is an odor to the spray and you also want to be careful of overspray and keep it on the towel. Do not spray directly on the vehicle, as even the smallest of sunlight or hotspot will produce an undesired result that’ll take a bit of elbow grease to buff out. I’d spray a couple of times on my cloth and handled one area at a time. I buffed it like buffing any other vehicle but keep in mind that the more you buff the dryer the chemical becomes and you don’t want to just be buffing on paint. A couple sprays on towel, several seconds with each buff, turn towel over, buff small are and move on. Great product with great finish.

Very easy to apply, extremely effective. I love that you can wipe it on everything, makes the application dramatically easier than wax. Does a great job rejuvenating and protecting black plastic trim as well. Not cheap, but extremely worth it, from both a performance standpoint and a time (ease of application) standpoint.

Do not make the mistake of thinking this is an auto parts store quality spray ceramic. It’s not even in the same realm. This is a coating in every sense of the word. I used a red/gray microfiber applicator for coatings to apply it. I sprayed plenty of it on the applicator and did the typical cross hatch. I definitely recommend not letting it sit too long or it gets pretty grabby and a workout to remove. Just apply it and either wait a minute for it to sweat or just wipe it immediately. It goes on pretty thick and works just as well on PPF, glass, plastic, trim, wheels and as a top coat over my existing Mohs /Skin coating as a sacrificial layer. The gloss from this product is absolutely stunning. It’s not just shiny…we’re talking gloss deep enough to swim in it. Easily one of my favorite products of all time. Update: I like this stuff so much I’ve been just looking for other places to use it. Decided to apply it to my Stihl weedwhacker. The straight shaft which is aluminum, the gearbox, head and safety guard got a double coat. After doing the yard the grass that covers everything and usually dries into cement just falls off with a quick rinse of the hose. No grass stains or scrubbing. I love it!