100 Pcs Recorder Rubber Belts Mix Flat Cassette Recorder Repair (1mm & 4mm)

Used on Sharp 5757 boombox tape deck. The belts that matched the factory size were a little narrow but worked great. Tape deck back in action!

Just what I needed to restore my Radio Shack portable cassette recorder to operation. I found all three belts that I needed in this assortment. Fast forward and rewind will not operate correctly in this tape recorder if the FF and RW belt does not have tension in it; the player uses this tension to engage the common drive sprocket for these operational modes. The belts seem to be of good quality and have adequate stretch.

Great idea didn't work out for me!

I have repaired several cassette players with this set.

Decent belts, you do have a many to choose from, but there are a lot of the same size and thickness, they work for a lot of different repairs, however a few variations of different size and thickness would have been better, unless you're going to use a lot of the same size belts. They're also not really heavy duty, most for like cassette or micro-cassette repairs, or smaller VHS components, not going to work well on record players and motors that use a lot of torque.

To buy the exact size I needed was difficult. So I took the shotgun approach and bought this big bag of assorted sizes. It had the exact ones I needed. I don’t know how long they will last but they worked perfectly.

Good quality

The wide (flat) belts weren't wide enough and kept wandering off the flywheel and the skinny (square) belts had too much slack.

Según lo que pedí muy bueno

good

Bon