P5 Ergonomic Office Chair, Desk Chair with Adjustable Lumbar Support and Height, Comfortable Mesh Computer Chair with Footrest 2D Headrest, Swivel Tilt Function Black

I received this chair and started the sorting of parts took a deep breath and prepared for the task of assembly. The parts were very well identified and easy to use, even the typically weak wrench they include was easy to use. One thing that amazed me was the quality of even the package and how it was put into the very heavy duty box. Each part was wrapped and placed so there couldn’t have been damage unless the box was run over by a truck. Down to the mechanism was doubled covered with wrap then cardboard. So as for the instructions my only complaint is how small the type is but I’d say that about any instructions. Trust me when I say over 60, have a magnifying glass handy 😊. So each step of assembly includes a picture plus parts needed. While putting together they had me put on the arms and mechanism that sits on the gas shock. At first I thought this was odd and would be a pain when put to go the back but I was wrong. The instructions had a picture of how the seat could be put on the shipping box so it was easy to put in the back of the chair. From there turn it over and set it on the base assembly. It took me about 30 minutes to complete the assembly and probably easiest office chair I’ve put together. Finally after head rest was in place I finally got to sit down. The arms seem very close together I’ll have to double check to see if I put them into correct screw location. The seat is firm and very comfortable as well as the back. I love how the lumbar works. It sits in just the right spot and you can adjust it forward or back as needed.. The headrest is very easy to adjust up and down and move back and forth to your liking. Once I had everything the way I liked I pulled out the leg rest and leaned back. I didn’t expect the leg rest to be comfortable or sturdy but I was wrong, the leg rest cradled my calf’s and even though my feet hang off end it was comfortable. Also because of the design of mesh back and the leg rest this chair is cool. In my previous leather chair it could get have warm and cold in the winter. Overall I’m giving this chair 5 starts because it was easy to assemble, each piece felt 1st rate, and the comfort. I highly recommend and would buy again.

My dad always told me, “Don’t cheap out on anything between you and the ground.” To me, this applies to shoes, pillows, beds, and now, chairs. After doing a ton of research about what is needed on a good chair, I took a chance on this one. I was a bit skeptical, thinking it might be a bit too cheap to be good - but I was wrong. The good (the GREAT): the difference between this chair and modern ‘gaming’ chairs is night and day. Adjustable lumbar, adjustable neck position, adjustable armrests in my opinion are must haves, and work perfectly on this chair. I have been using it for a month now and my developing back problems went away in a week tops. The kickstand thing would be a huge plus if one of the brackets didn’t come cracked. The price is great. Some of these chairs get super expensive, and this chair does a good job of getting what you need out of a chair without the crazy expenses. It seems sturdy and well built. The mesh is comfortable yet firm. The seat is soft and conforming but does not stay imprinted, it goes back to its original shape consistently. The adjustable arm rests are great. They aren’t too hard. The not-so-great: like I mentioned, one of the brackets for the chair came cracked. It was packaged really well and the piece is tucked right on the bottom of the main seat piece, so I don’t think it was anything to do with shipping. If I bought this chair intending to use it frequently I would be a bit more upset, but I just removed the whole leg rest to stop it from moving and falling around. Overall this chair deserves 5 stars for the price and value points it delivers on. It would be even better if the leg rest worked.

My instruction book was entirely Chinese. There is a short qr code for scanning a photo to bring you to WeChat to I guess find a link but like most of them... Is kinda faulty. I did it based more off the Amazon video than anything but the legs are Screw F not E... There was a secondary Bennett's reviews video in English but I had to look at his and Amazon's video (which is a hassle to pause and play again it has some bugs) to cross reference. I managed to get it put together, but the ease of assembly was not great. I do like the chair it is very comfortable now that it is made, but it was a frustration to make for what should have not been that difficult of a chair to put together. I do not think it is unreasonable for this amount of money and listeded on Amazon well reviewed to ask for English instructions for a clearly Chinese made probably resold, chair. In also that line of thought: I do not know how to recline the chair because I DON'T HAVE INSTRUCTIONS and the little diagram on the paddle is confusing. Easy enough adjust up or down, or to adjust the lumbar support up or down. But.... Come on. A little bit user error I get, but I can not cross reference the instruction book to see how to get over user error. I am disappointed but sending it back would be too much work, and the chair as a whole is comfortable and sturdy... I just wish, for this type of money support/instructions were better on the chair. As I can't even use all the features as I haven't figured them out. Edit for my review: Upon re looking at the manual again thinking certainly I missed something, I did find the English instructions day or two after I built it: about page 30 missed it multiple times before. But there are relatively detailed instructions. The chair as a whole is rather comfortable. Extremely so. The recline while now figured out... Ish according to the instructions I finally found... Is a little finicky, but I probably use that feature the least and I think it is not fully understanding how it works. You pull out the lever while reclining, and I think press in while leaning back to get it to automatically straighten back up... But I seem to somehow mess this up. Because of the error in my ways for the instructions... I am raising my review a star from three to four. I really do like the chair but it is a little less intuitive in some areas. Like the one person say you have to like her up to pull the foot rest thing out almost. But other than my frustrations building it, I rather like it now built.

at first, I was a little overwhelmed with all the pieces that I needed to put together for this, but once I had them laid out and looked at the instructions it all made sense. It only took me about 30 minutes to put it together. The only problem I had was getting the wheels to seat. I did not like the wheels that came with it. These are the standard casters and I have carpet so it never rolls right. Therefore, I had ordered a different sort of wheel from a different seller that works beautifully on carpet. This is a very comfortable chair. The seat is thick enough that you don’t feel like you’re sitting on a board. The back is very supportive and comfortable and the headrest adjusts up and down to suit your height. Also, there is an adjustable lumbar support which makes the chair even more comfortable. This was a bit more expensive than I have ever paid for an office chair, but here’s the thing I feel like I’ve wasted my money on all the other office chairs I’ve bought in the past that were not comfortable... not sturdy.... The seat was too narrow, or had a strange forward slant... just not what I wanted or needed. I think this will probably be the last one I ever buy. don’t let the price make you pass this by. I highly recommend it and I would buy it again if I had ever needed another chair... like if this one burned up in a fire or something. LOL!

Most uncomfortable chair I’ve ever sat in. Extremely narrow width, high armrests with hard surfaces that hurt my ulnar nerves, it feels like sitting in an electric chair. The back and neck rest is horrible and feels like it’s constantly pushing your neck forward. My neck is sore and I can’t sit in this chair for more than 30 mins at a time. Footrest is completely useless and and is so high that it requires you to have your knees against your chest. Buy any other chair except this one.

For me the chair was easy to assemble, took me maybe 15-20 minutes. The chair seems sturdy for me 5'10 - 195lbs. The comfort is just okay. The seat is springy, you can feel them when you sit down. But they seem to bottom out quickly which looses some of that comfort and I think the whole point of the design. The seat back does give a couple of angles to stop the back from moving, which is nice. But the overall seat and back seem small to me. I feel like I always need to be moving to find the sweet spot. Otherwise it quickly becomes uncomfortable. Botttom line... This is a nice chair, seems sturdy and can be comfortable if you tend to say in one position all day. But for me it's not a great WFH chair. I am going to keep searching.

This chair fills all the boxes comfortable to sit in and the recliner is the icying on the cake -- love it

This is a quality chair and a real bargain for the cost. The ability to adjust the lumbar support up/down and in/out is a backsaver. This is the first chair I have ever owned that I don't have to use a pillow or something for additional lumbar support. The parts that should be metal are metal. It reclines back far enough for a good ol' nap and the pull out footrest is pretty slick. Hbada makes quality products and their customer service is beyond reproach. If you have any kind of problem Hbada will take care of you. They are all about customer satisfaction. I have no connection to Hbada nor do I make commisions as so many reviewers on Amazon do. I'm just a guy who bought a great chair from a great company.

Trabajo todo el día desde casa y es super cómoda. Los materiales son de muy buena calidad porque no te genera calor. Para alguien que esta sentado mucho tiempo al día, le conviene bastante ya que tiene descansa pies y es reclinable. Muy buena inversión a largo plazo

Finally after a lot of trials we have chanced upon something that different members of our family find comfortable. I am five feet tall and my husband is over six feet. This meant we could never share an office chair because chairs that work for short people don’t work for tall people and vice versa. In this chair almost every aspect is customizable- the height, degree of recline, the arms ( including angle), the neck support, the foot support and the neck support. Great chair for a great price. We have had it for a month. Hopefully it lasts.

Je suis déçu par le confort. Je fais 6'3", j'ai une scoliose et j'ai du ajouter des coussins pour avoir du confort. Si vous êtes dans ma situation, achetez autre chose.

Excelente silla, me llegó con todo en tiempo y forma, vale lo que cuesta, unismo modelo pero con reposabrasos 3D estaría aún más perfecto, pero muy contento con el producto.

Great Chair!