PA03586-K983 PA03586-K984 Scanner Paper Feed Roller & Exit Roller with Shaft Compatible with Fujitsu S1500 S1500M fi-6110 N1800

The rollers fit perfectly. But it is a tedious process to replace the rollers. There is a good video by the OKLILI company that sells this product that goes through the whole replacement process. It will take a good bit of time and patience to replace these, but for me it was worth the time. Rather than spending hundreds for a new scanner, this $20 product made sense to me.For me, it was worth the time. My scanner is probably about 20 years old. It has worked fine till recently and I saw that the feeder and exit rollers were all gummed up and that screwed up the scanning. Fujitsu doesn't recommend replacing these rollers....I think they would rather sell you a new scanner and they really didn't design it well for replacing these.I replaced these in a couple of hours, and it took some careful disassembly and reassembly. But the scanner works great now....and hopefully for another 20 years or so.

These are great replacement parts for the scanner. The original rollers were wore out and sticky and these fixed the problem.

El repuesto se ajusta de manera impecable en el scanner, es completamente funcional y de una calidad excepcional. Llevamos usándolo durante más de dos semanas y su desempeño ha sido sobresaliente. El envío fue rápido, y el producto coincide exactamente con lo mostrado en la publicación

I was given an old s1500 that had "melted" rollers. They looked like tacky glue and were just messy globs. The scanner had to be torn down nearly completely to access the rollers. Once the inside was cleaned and these new rollers were installed, the scanner functioned like new. This is a very good replacement part.

This set of parts worked great. It took some time to disassemble and reassemble the Fuji Scanner 1500 model but it was worth every second of it.