Upper Control Arms 2-4" for Tacoma 2004-2023, Dynofit Front Aftermarket Control Arms for 2004-2021 Fortuner and Hilux, Suspension Tubular Automotive Replacement Control Arms for 2005+ Prerunner, 2Pcs

Better built than I expected for the price

The media could not be loaded. These work well for my first gen Tacoma, install was fairly easy and they ride pretty good. I have 1.5” spacers so I wasn’t worried about rubbing the uppers when I turn. However, I have had issues getting the positive camber pulled in since I put them in but that may be a me issue, hence the 5 star review. They did come scuffed as shown in the picture, but it’s on the underside so I wouldn’t worry too much.

These gave me the space I needed after I installed the level kit. Love that they are greaseable.

These upper control arms are just what I needed after lifting my truck. They come with all of the bushings needed for install. The parts are well built and seem pretty solid. Installs the same as OEM!

Everything was good and went together easy, glad there was an extra verts cuz I ended up snapping one with a wrench so only finger tighten them or apply very little pressure with a wrench. Front end is alot tighter now with the ride but that may come in handy if you want to remove your sway bar in the future.

Impossible to fit UCA and washers in OEM sleeve welded to frame (see photo) of 1997 tacomaInstalled zerc fittings end up at random locations (see photo), some at angles very difficult to lubeDirections are vague at best, broken English, and cover a variety of designs (confusing)Seller says they will enail a video if requested (why not just a YouTube link?) No response to emails after 48 hours.Save your money and get something decent

Update:About 6 mos 12k miThey are holding tight and look like new. No complaint on construction quality.However, they squeak like crazy. It’s embarrassing. I’ve lubed them so often and with so much grease I can catch handfuls of it.Yet, still crazy noisy squeaky. I’m not sure if the grease isnt somehow hitting a certain spot but it’s annoying as hell.I’ve tried a needle grease tip anywhere I could jam it. Same. Argh.Hoping it goes away.Original reviewThey look very similar to many pricier arms from ‘specialty’ companies.The welds and finish look like great quality.Everything needed to install. No mods needed. Comes with grease and spare grease fitting.With about 2000mi on them so far, they have been great.No noise. Steering is slightly tighter/heavier feeling which increases confidence.They corrected the maxed out alignment for my Eibach lift.No more nervous steering g due to camber.Should also prevent the feathered/cupped outer treads on my A/T tiresSays pre greased for a year.I filled zirks even more and. Few shots to the ball joints too ( under dust cap).Zirks are reachable through wheel wells for future easy access.Don’t over tighten the zirks.Use a thread locker when installing.Hopefully the metal holds up/remains safe( looks it).- I don’t rock crawl/off road but do see Northeast potholes.Hopefully the ball joints ( metal to metal design) hold up for at least a few years. And are replaceable with oem type.

Fit good just need some pervasion and bleeding knuckles. Will rub with 33's