📱 Shield Your Screen, Elevate Your Experience!
The Orzly OnePlus 5T Screen Protectors offer full screen coverage with ultra-thin tempered glass that boasts a 9H hardness rating, ensuring maximum protection against scratches and daily wear. With 99.9% transparency, these protectors maintain the natural look of your display while providing easy installation and a complete accessory kit.
J**N
Great fit for OEM case. Good quality and good value!
OnePlus 5T comes with a thin plastic screen protector installed. I waited a few months until it got scratched up then I replaced it with the official OnePlus tempered glass protector. Fit and finish of the OP version is great.Having recently smashed my phone between my handlebars and a tree, I went back to the OP website only to find that they no longer sell the tempered glass protector.So I "took a chance" (not really, it's only $12 for two) on this version by Orzly. The fit is perfect if you are using the free clear case that comes with the phone (which in my opinion is the best protector without going fully enclosed, or being so bulky that you don't even want to take your phone with you), and you should put the phone in the case to center the protector correctly during installation. The holes for the camera, proximity sensor and earpiece are spot on as well.Not clear to me from the reviews I read, this protector has full adhesive so as long as it is installed correctly, you won't have a rainbow effect. Poor quality protectors I guess will only have adhesive at the edges so there's a constant air gap and the plastic exhibits a polarized rainbow effect (like oil on water).I was thankfully able to install this protector without a single bubble or piece of lint or otherwise, under it. Aside from a dust free chamber to work in, wear tight fitting, thin, powder free exam gloves, meticulously wipe down your phone, the case and everything in your chamber. Completely cover your bare phone screen with clear packing tape. Don't leave the tape on it for more than a few minutes and use good quality tape that will peel off with no residue. This will leave you a perfect dust free surface that you can carefully place the screen protector on to. The glass will naturally adhere to the screen and will start to stick, moving from one edge to the other. Using the included plastic card, you can push the air gaps together and off to the edge of the screen. Any persistent gaps can be worked out over a few minutes by pushing them together and off to the edges.Trouble: You put the protector on and there's one pesky piece of lint under it. You can carefully lift the protector off, handled by the edges and use the included Orzly tape strips to gently remove the particle. Hold the tape in such a way that you can place just a small section of the tape on the particle and lift straight up. You don't want to shear the protector's adhesive, otherwise you'll damage it and will see it.
C**G
Very Good. Close but not Quite perfect.
I had to buy a new screen protector to replace the OEM one that I got when I bought my 5T. Directly comparing these to that, I would say that they're "pretty good, not perfect but very close". At the current price of 12 bucks for a two pack, this is a compromise I can certainly live with, although your mileage may vary.As far as the differences between the OEM and Orzly screen protectors:The packaging is different. While the Orzly protectors come attached to a flat plastic backing, the OEM one comes on a slightly curved plastic backing. This actually seems to make a difference in how well the protector ends up sticking to the device. The OEM backing seems to promote a 'learned' curve in the protector during shipment, so that when you drop it on your phone the edges don't tend to lift even if you don't quite perfectly center it. Orzly's flat backing meant that, when I was trying to place my protector on the phone, I was getting small edge lifts unless I perfectly centered the protector over the phone. I didn't notice any edge lifts once it was perfectly centered, but it was annoying having to repeatedly reposition the protector to get it to sit right.The Orzly is definitely a thinner glass than the OEM one. The OEM protector is actually really thick (at least 0.33mm, if not greater), whereas the Orzly is thinner. It almost seems imperceptible but the thinner glass does seem to help with screen clarity and touchscreen response, particularly near the edges of the screen. It also affects how the device sits in cases. The Orzly in my OEM slim case for example, is just about flush with the case surface rather than protruding.I attached a couple of pictures showing the general shape and size of both the OEM (cracked... RIP) and Orzly protectors. As you can see, they are extremely close. The thin black edges of the Orzly are in fact thicker, but it's almost imperceptible (probably 0.5mm or less) and in day to day usage I don't really notice it. As some reviewers stated, this black border cuts off a bit of wording if you were to use the terminal, but most apps and websites are designed not to have words all the way to the edge. Of course, you also payed for a 'bezel-less' design on the phone so this might bother you (but you will probably also be annoyed by the OEM protector in that case as well). The thick top and bottom edges also cut off maybe a mm of screen real-estate but this is even less consequential. The big concern for me is that physically, that 1mm also comes off the bottom of the screen protector, which means 1mm less "real" screen being protected against a part of the phone that tends to rub against your clothing a lot when you put it in your pocket.Overall, I would recommend this protector to all but the most OCD of people. It's about 90% as good as the OEM protector, but at a much lower price (for a two pack). The Orzly's one advantage is that it's thinner glass; fitment is close; but not quite the same; and it's more difficult to get perfect edge adhesion the first time unless you get it perfectly centered, due to the way the protectors come shipped vs OEM.
D**H
Fits with Spigen case. Good protector. No rainbow effect.
Excellent. Just got the new version (today is Jan 2, 2018). It's about the same size as the stock one (a very tiny bit slimmer and not as thick), and the oleophobic coating is great. It actually has full adhesive, so no more annoying rainbow effect. It stuck to my screen perfectly. The Orzly one also costs a quarter of the stock one per protector with Amazon's fast shipping. I will not be buying another stock one because of the price. Yes, the stock one is a little thicker and tiny bit nicer (not that much nicer), but for 4 times the price, it's definitely not worth it to me. This one doesn't go all the way to the very edge of the screen (the stock one doesn't either), but it's perfect for everyday use. Do not buy it if you use the terminal app all day long (or any app where letters go to the very, very edge of the screen). You lose a few rows of pixels with this protector. You also do with the stock one. I'm happy with my purchase. Fits with the Spigen case.
I**A
[update after 3½ months] The search is finally over
After about 3 months, this screen protector has been a huge annoyance. You simply can't use navigation gestures, since both of my screen protectors have small bubbles around all edges. This makes swiping from the side of the phone to reveal a side menu in any app super inconsistent and annoying, so I ended up removing it all together. As long as you have a tough case, I'm sure the bare glass won't get cracked.[old review]Well, I never thought a third party screen protector would even be close to the quality of oneplus's own, but this one is. From my knowledge, nothing else like this exists out there, since the oem one isn't even on the oneplus website anymore. Of course, it isn't perfect though, the very edges of each side couldn't adhere properly and left small bubbles (which I really don't know why manufacturers struggle with) but it's preatty damn close.
C**.
Like it
This is a nice case which is very neat. Protect my IPhone XR well. It’s hard to peel off the skin though, took my quite few time to figure out! It fits the phone very, good n the other word, very tight! As long as I don’t need take it off often, it works fine with me!
J**A
Buen precio por un producto de calidad
Fue tal cual y cual lo que pedí! Rápido y producto de calidad
C**N
Perfect screen protector with adhesion throughout the protector
Perfect screen guard for OnePlus 5T. Bought this as a replacement for a screen guard which had adhesion only in the corners and needless to say it gave way in less than a week.I didn't realise that there is cost cutting going on in this product as well and bought a bad product.When it gave up, I was very careful in reading through the product description and ensuring that the adhesive was throughout the screen and not just in the corner.The Orzly screen guard is great, comes with good quality screen cleaners and a sold screen guard. Highly recommend.
P**O
Formato perfetto per OP 5T e grandissima qualità
Posso confermare che si tratta di un ottimo prodotto perché: 1° ben confezionato; 2° perfetto per OP 5T; 3° facile da montare, seguendo la procedura e gli accessori di pulizia non rimane alcuna bollicina o pelucchio...non avendo più una mano ferma e una buona vista da vicino lo ho riposizionato per 4 volte fino ad essere soddisfatto del risultato e dell'allineamento; 4° è fortemente oleofobico, dopo 2 settimane di uso costante posso confermare che, quando riesco ad accorgermi delle impronte o strisciate, si pulisce in un attimo senza dover usare per forza alcol o detergenti. Anche se è previsto il suo decadimento per uso, avendone provati tanti in questi anni, ritengo che sia il migliore mai usato. Soddisfatto+++
L**J
Impeccable, enfin un verre qui colle partout.
Le meilleur verre trempé, il est compatible avec les coques orzly et ringke, personnellement j'ai une ringke, l'application est facile par contre il faut bien cadrer le verre ( moi j'ai mis le téléphone dans la coques et ensuite j'ai mis le verre) après la pause si il se soulève sur les côtés lors d'une pression sur la coque c'est qu'il est mal posé ( ce soucis n'existe pas avec les coque oneplus et les coques orzly) si il y a un trait blanc sur les côtés il y a une technique pour les retirer, protéger avec du scotch les côtés de l'écran pour le rendre étanche et passer avec un coton tige humecté d'huile d'olive les côtés qui adhère mal ( le fameux trait blanc) nettoyé avec du lave vitre et retirer le scotche et c'est impeccable ( cette technique est valable sur tout les écrans en verre qui on ce défaut d'adhérence) là communication avec orzly en cas de soucis est excellente, pour moi c'est le meilleur compromis, l'écran est bien protégé le tactile est parfait sans parlé du prix par rapport au verre vendu par oneplus.
Trustpilot
2 weeks ago
2 days ago