AnkerUSB C Hub, 8-in-1 USB4 Docking Station with 1.6ft Cable, 10 Gbps Data Ports, 8K HDMI and DisplayPort, for Microsoft Surface Pro 8, HP EliteBook 850 G8, and More

My previous USB-C hub plugged into a 2017 MBP, and the 4k external monitor had the full range of resolutions when plugged into its HDMI port. However plugging it into a 2023 MBP, I had a reduced number of resolutions and, everything had become much fuzzier. Plugging directly into the computer HDMI port resolved that, but I wanted a hub so I would only need to make a single connection when I plug the laptop in at home. Hence the new hub. I updated it to connect via the displayport, and everything looks just as good as it did before.I did try a displayport-USB-C cable into the USB-C port on the hub. When I did that, the external monitor wouldn't connect. But using the exact same cable straight into the laptops port worked fine.

Anker quality, works well out of the box, haven't had a single "video sometimes flickers" problems. Does fully support dual 4K@60 as advertised. Works perfect for my ROG Ally offering turbo mode with a 100W charger.Do keep in mind you need to bring your own power brick.

These past few couple months I have bought and tried many hubs for my new ROG Ally. I have very strict requirements:-Activates '30w Turbo Mode' with proper wattage from power brick, and suitably rated usb-c cables both from the power brick to the dock/hub, and also from the dock/hub to the Ally.-Upstream bandwidth must be fast enough for operation of a hi-speed drive + any other peripheral at the same time-USB ports must be 3.2 gen 2 10Gbit-Must have a minimum of 3 USB ports-HDMI must be true 2.0 specs (4k60, 2k144, 1080p240) <-- *Have not been able to test this part yet*-sd card slot (does not matter if UHS-I)-Ethernet port-Supports at least 65W PD to main device-Able to maintain stable operation when part of a daisy-chainBefore this hub, I mainly tested Ugreen hubs. This Anker one is better than the Ugreen ones I tested, but to be fair, all of the Ugreen models were $30 - $60. Material, and apparent build quality is about on par between the two companies.How this will hold up under load (my particular setup in a 3-hub daisy chain), will be the question. Only time will tell how good the circuits are, so I will report back if something goes wrong.This hub and the official Steam Deck dock are the only third-party hub/docks that I personally have tested that activates the '30w Turbo Mode'.Also, I have to mention Anker's support. They are professional, and quick to reply! Thanks, guys!

Update:-Still working fine (Dropped 1~2x)-Does not support FreeSync-Extremely convenient (no attached cable)-10Gb USBC port is data only/NO VIDEO-Comes with a good quality cableSo far it is the only HUB I've needed to purchase for the sake of mobility. I use it daily for simple tasks, upwards of 16 hours at a time without issue.-----------Original Edited:-Satisfied by its usefulness (basic)-Ethernet clip in the port broke (thin metal)-Questionable durability and longevity------------I'd originally wondered how it would hold up to this point, and I have to say that despite my doubts otherwise, this is a fine long-term solution if you're satisfied with its specs.

I got it as a dock for my secondary setup and for travel, all the features work and it has enough speed for my usb devices and monitor over displayport qhd 144hz, it DOES NOT support variable refresh rate/freesync like I was hoping but I guess it is what it is. It also works fine without a power supply as a portable hub. I got it for $100 and think it is ok for that price, for $150 it is a tougher sell and you should proably just go for a full thunderbolt dock.

Picked one of these up to run a multi-laptop setup with one screen.First unit worked great for about 6 months, then video out stopped working over display port and hdmi. Opened a support case, they shipped a replacement unit once the first was shipped.Second unit was obviously used / refurbished, arrived with light scratches around the ports. I used the second unit in a charging-only setup for phones and tablets, and now it won’t charge and I get a blinking indicator light.Considering I was using an Anker power brick (not included) and Anker USB-C cable (not included) and the unit still died within months, I would avoid this model.Perhaps it would work for occasional use, but multiple faulty units in less than a year leaves me less than confident.

Turns out the 100W input rating isn't some kind of max limit, or suggestion, it's an absolute must. Tried using this thing with a 65W (OEM laptop charger) input and it failed to deliver power throughput, had serious banding/signal quality issues with screens, and reset occasionally. Purchased a 100W charger and it runs perfectly. It's a great product, but it should be crystal clear in the user manual that it actually needs a high wattage input to run correctly - the way it's stated currently is very misleading.

After messing with all the different Thunderbolt docks I am so happy to find one that works on all my devices. Multiple generations of Lenovo laptops, Samsung phone, and my portable gaming rig. This is a pure winner with enough video bandwidth for high color modes and refresh rates. It's so nice to have the ability to run 10-bit color at 4k 60hz on my old LG display. Go USB4 and forget thunderbolt!