Graphtech Guitar Top Nut (PT-6748-00)

Didn't have to shave down anything, easy drop into the guitar, only use a little glue to hold in place. Fixed all my dead spots from the original bridge that got too worn down. Very high quality nut, these graphite nuts are incredible!! Have a nice clink tone to them if you lightly drop them. Already played on this a few days and now the guitar plays better than when it was new!!

Solid stuff, makes a little brighter your guitar, easy installation

Length=48.00mm , Width=5.95mm, Height=8.09mm. "As Listed" on Graph Techs website these measurements are correct, and they should also be listed on amazon product description for customer clarity in my opinion. The "Width" measurement is the thickness from the wood on the fingerboard towards your truss rod cover plate. The "Height" measurement is only correct at the middle of the nut to the top. (not the cut slots) At the space between the E and A slot the actual measurement is closer to 8.13mm, but that shouldn't make any difference to you. The nut is slotted very uniformly, (well) no super uneven or deep wanky string heights. The material is slick as stated on Graph Techs website because of Teflon being impregnated into the plastic. I bought this as a replacement for an Agile Septor Pro 727 with 27 inch scale that had a nut that looked like a monkey hand carved it. Can't speak to how this matches, or does on Schecter models. However, it is what they say it is.

Works perfect, fits my Schecter C-7 like a charmIt was pretty easy to take off the old and replace it, I just took a box cutter/razor blade and carefully and slowly pushed it under the old nut until it came out somewhat on its own. I then used about two drops of gorilla superglue to stick it back on. I had to replace the old nut because I filed the thickest one a while back to make it a little wider, but I was stupid and made it deeper, too deep. But not its perfect! And quick shipping too.

Black tusq is second to none. I dont own a guitar or bass that doesnt have graphtec black tusq everywhere possible - bridge saddles, nuts, and string trees. Hands down the best money can buy

Was a drop in replacement without any issues on my '99 Omen-7. I'm a fan of tusq, think it's durable, and the self lubricating claims seem valid. The slots are high though, so be aware that you will need to file them to have good playability/intonation at the lower frets.

This nut was worth the replacement because the original one I had on my 7 string on the high E string would bend an snap. This nut was infinitely better hands down.

Nice product, fast shipping and fit my Jackson js22 perfectly, I did use a cut off of a business card to shim it up just a tad bit. but it was no problem at all. a little super glue and I had it installed in just minutes.