Universal Frame Hangers

Great product, work as expected

These are so great for hanging pictures or clocks, or anything that you want to hang flush! I have struggled with the hooks because they are either at the wrong angle or they stick our too far, or they show above the thing I'm trying to hang! These do not do that! Most of the hanger is below the "hook" which is wonderful, and they have a very slim profile. They are very easy to use and come with stabilizer pieces so your picture doesn't get knocked out of place. I put one of these up last night to hang a clock and it was so easy! These all metal, one piece picture hangers are a game changer!

These were easy to install and adhesive seems to hold up well. I used them to hang record album frames.

It's been holding my 7.5lb picture for 10 days so far. I'm very satisfied. All others didn't hold...weren't command. I should have known better trying to save a few dollars wasn't worth it

This review is for the Command Universal "Jumbo" Picture Hanger - basically the double wide one with the round peg which requires TWO strips. 1st Downside is that unlike the two-piece "Hooks", these Picture Hangers are a single unit. Attach (two) glue-strips to back of the metal and PRESS. Stronger hold, but at least twice as hard to remove. 2nd Downside is that these items ship with the lesser-quality glue-strips, NOT the ones designed for a higher moisture environment. When I order these "Hangers", I pretty much dispose of the glue-strips that ship with them, and instead order-and-use the ones designed for higher humidity. 3rd Downside is that having TWO of these glue-strips close together means that removing them will be that much harder with more force being exerted on the fragile wall (paint). Depending on what kind of paint was used and how it was applied, you will either Luck Out or have some Patch Work to do. I heard once that Flat Paint may have been the Most Friendly, but there's always a risk. I have tried to use these only on non-painted surfaces (or flat paint) and have had pretty good luck. When used with glossier paint... ....Patch Time! Also never expected whatever Laboratory Conditions used to come up with the 8LB figure to function on my planet. If using something which is HEAVY, will double up the hooks. If they say it holds 8Lbs, will assume 4 tops. Have seen various types of hooks hold All Day Long, but when one interacts with the object on the hook, it can act like a lever and apply significant force. Eventually it may pop off the wall. Just like flexing a credit card - it's rigid till it snaps. That being said. Using this item (within limits) works quite well. Just had an issue where a piece of Annoying Plastic Equipment had to be mounted in an enclosed confined space where drilling into the walls was either Not Recommended or... A Pillar. Plenty of Objects already present, so attached "Hangers" to Objects and the Annoying Plastic Equipment was off the floor and out of the way in moments. Equipment even had holes on the back which fit the Pegs on the "Hangers" perfectly! BUT, the Equipment also comes with an (optional) Something which is 12x12 inches and weighs around six pounds. Would use at least two hooks for that, and would still try to find a way to support some of that weight from below. Still, it worked GREAT, and I immediately ordered some more "Hangers" (and the Higher Humidity Strips) to have these on hand for Future Use. FYI: Have been using Command products for many years, and the only ???? Issue which I've ever seen is the Strange Design Flaw many Command hooks have. On the back of one's "hook" near the bottom/center is a Sharp Point. When one "slides" the hook up and down on the wall, the Sharp Point does what Sharp Points do and gouges up the wall. Thankfully not all Command products include the Sharp Point, but it's usually pretty easy to spot - look at the bottom/rear of the hook, and if you see Something Sticking Out - oops! If it's Perfectly Smooth - no worries. Thankfully these "Hangers" do not need to "slide" up and down the wall, so there isn't an issue.

works awesome stays in place easy to use

These Command picture frame hangers are great for minimizing the amount of wall damage I need to repair before moving (which I typically do every one or two years). I also no longer take the time to measure before hanging picture frames like I previously did with hooks that damage the drywall. It's much faster and easier for me to eyeball the position on the wall and remove/adjust when necessary. I've only had these fail once when I didn't take the time to properly clean the wall before applying. I assumed it was unnecessary because the wall did not appear to be dirty or dusty, but I've had no issue after wiping the surface with rubbing alcohol and reapplying. Occasionally they do tear the drywall outer-paper layer upon removal, so it's not a perfect solution. But, I suspect this has more to do with the quality of the drywall than the adhesive properties of the Command strips.

These are super easy to use and hold up really well. I use on small/medium size photos on my walls in my apartment.

Beaucoup de promesses pour un résultat très très médiocre

Looks super durable and it is very sturdy! Comes with one main hanger and 2 stickers, removing it is so easy also! Good to also have refill strips if needed!

good to use when you dislike drilling the wall.

For hanging pictures or clocks these are the best option. They're versatile and can be used to hang both wired or sawtooth frames as they can be reversed. They're also more secure than the plastic type and won't fall down like the velcro strips. ( Which I found out after some very costly mistakes with items falling off the wall). They're also better than drilling a hole as there's no repair if you want to move the item, as you just use another strip and rehang.

Excellent for hanging those annoying frames with the wire on the back. Follow the provided instructions and in no time you'll have your frame up on the wall. Another great 3M product!