10mm Heavy-Duty Staples, Pack of 1000, Type G, 1-TRA706T | Thick Gauge Wire, Corrosion Resistant Galvanised Metal, Compatible with Hand and Electric Tackers

Great product

Reasonable priced good quality staples

VERY GOOD, CONSISTENT STAPLES, BUT WHY PUT THEM IN A NEAT, STURDY PACKAGE, WITH A HANGING LOOP, WHICH CAN'T BE HUNG ON THE GARAGE PEGBOARD? THE TOP JUST COMES OFF AND THE BOX WITH THE STAPLES ENDS UP ON THE FLOOR.

Perfect size for my guild electric staple gun. The staple are thick and sturdy. I would definitely recommend these.

Very good staples. I've used these to help build a series of radiator covers and they've done the lighter parts of the job admirably. I used these 10mm staples to attach an MDF grille to the front surrounds (through the MDF into pine), and 14mm staples to attach the surround to corner supports (through pine, into pine), which they have done very securely. Even though they're "just staples", they perform really well when putting together something that is never going to take severe stresses, and there is strength in numbers when putting in a series with a nail/staple gun. With shorter staples there's obviously a degree of calculation that needs doing to ensure they will actually hold. There are many wooden and MDF sheets that are thick enough to make stapling a bad idea. In my case I was stapling a thin(-ish) MDF screen to a pine supporting frame that was 10mm thick, so it was obvious that I would staple through from the MDF side (which also hid the staples) since it was the thinner of the two parts. Done the other way around, the staples would never even reach the MDF. With 14mm staples you can often get a better choice of how to tack parts together - then again, sometimes they're just too long and would punch right through a workpiece, and that's when 10mm does well. Obviously the results you get are dependent more on how you use the staple gun rather than a reflection on the staples, pushing the gun firmly to the workpiece to avoid any recoil or bounce will get a nice flush finish. Even though they go flush with the surface really well, there will still be some filling required (or overpainting), although you may decide to conceal lines of stables with glued-on trim profiles. I'm very pleased to have been able to make a series of bespoke radiator covers using only staples, I really didn't think it would work on my first experimental one, but they do the job fine. No misfires or jams either, in my TRE550 stapler. Highly recommended!

Great staples

We used a smaller size staples to attach pvc coated support for climbing roses, but a couple of the roses have grown too large and heavy and the support came away from the fence, this larger size is perfect.

Only thing I ordered the wrong size

Exactly what I expected. Amazon delivery mind boggling. Delivery within 18hours. Not even a special delivery.

Dobre

Allt ok

First one arrived broken, they replaced it fast and easy. It works well with a good handle to make sure you can easily aim at the right spot. Very sturdy result too.

Perfect fits for TR250 Staple Gun & great for canvas. Very satisfied with my purchase.