Electric Fuel Pump Kit Universal for Carburetor Lawn Mower Transfer Gas Diesel Include 2 Meter/6.56-Foot 5/16" ID Fuel Line + Fuel Filters + 10pcs Hose Clamp 2.5-4psi HEP02A

I bough this fuel transfer pump because I was tired of siphoning fuel. It hooks up to a 12 V battery and works well to transfer from one container to another. I is a little noisy and sounds like an aquarium pump, but I am not complaining since it does the job it was designed to do.

This worked great for 12 horse koler engine. Good price, works as should.Would purchase again.

Works well

This has been working in my Suzuki Sidekick with Weber carb for several thousand miles now but the fuel PSI is higher than advertised at 4.5 to 5.0 PSI.

This was the answer to my no fuel problem causing a no start issue. The mechanical fuel pump on my John Deere Z320R mower stopped pumping after 29 hours of operation. I replaced the fuel pump and it did not fix the issue. I then replaced the carburetor and it did not fix the issue. I then installed an electric fuel pump and was able to get fuel to the carburetor and the engine started. I do not know what is causing the pulse line to the mechanical fuel pump to not work. There is no vacuum on that line from the mechanical fuel pump to the inlet manifold. I did check the line for obstructions and found none. Its a mystery as of now but the electric fuel pump fixed the issue!

I had high hopes for this pump and it did work... 3 TIMES. That's how many times i mamage to cut my grass with it.THE BAD:It uses too much electric for what it is. It drops my voltage from 13v to about 12v ( while tractor running) and no other components connected. By itself on its own circuit connected to battery with switch.It ran 3 times, the last time it overheated so much, almost as hot as the engine block ( it's NEXT to it, open air) to the point that the fuel coming out of it was BOILING by the time it was going into the filter, half of stuff going into carb by now was fuel BUBBLES.I expected more from this, I chose this versus pulpe pump because of fuel volume flow.DISAPPOINTED.Will look somewhere else.Of course return window is closed :)

Bought it for my 1980/s three wheeler and it works perfect. Others flooded the carb out while this maintains enough pressure to keep it running and not flood it. If i recall I needed something like 4psi? Works perfect. Wired straight to my key

I am not a complainer but only 6 weeks?! Come on man!!!! I own a 1968 fiat 500 F. Vapor lock with ethanol blended gas was a real issue. I run it in line with the mechanical pump. Fuel flows though, even when the pump is not running which is great. I have a push button that i press only for hot starts in hot weather. Fixed my problem flawlessly and i will keep buying it because it is very inexpensive and works great until it fails. If you are the seller and read this i think you should send me a free replacement. I'll keep it as a spare and i'll give you a positive seller-review for your good deed.