Scosche SA69 6X9" to 5.25”-6.5” Speaker Adapters Compatible with Select Import and Domestic Vehicles - 5 1/4" to 6 1/2" Adapter for Car Door Speakers - Sold in Pairs - See Guide in Image for Vehicles

Ok quality but will not fit big boy 6.5's I tried them with two sets of dead bonce apocalypse 110w RMS and they were just to bulky to fit. And when I tried to drimmel'em down they started to melt

Good quality and fast shipping looks great and fits and functions well.

First of all, it is a 6X9" speaker adapter that is designed for you to install 5.25" & 6.5" speakers - so for all the other reviews complaining that their 6.5" speakers don't fit... of course they won't... at least, not straight out of the package. Think about it - if the inner hole was 6.5" in size, then you wouldn't have the 5.25" option, right? I myself was installing oversized 6.5" midbass speakers, and all it took was a Dremel and about 5 minutes per adaptor plate to enlarge the hole to the 6.5" size. I do understand that some people were hoping for a direct bolt-on affair, but there's no way the plates would be able to accommodate the 5.25" option without having that extra material. The adaptor plates themselves have an outer shape that is identical to OEM 6x9", and the plate bolted right up into my door panel where the stock speaker used to be. The plates are nice and thick too - not flimsy at all, and once they're bolted down they's even stiffer. I went ahead and installed a sheet of Dynamat Extreme on the face before I placed the speaker in, and it's a bit overkill but I figured why not. Also, make sure to use some sort of foam gasket around the back edge of the adaptor plate, and around your new speaker basket before you put everything together; the foam will seal your speaker, adaptor plate, and speaker housing for no air leaks and more bass. Although I had no complaints about my experience, I gave the adaptor plates 4 stars instead of 5 for the sake of those who had trouble trimming the plates in order to fit 6.5". At the least, Scosche could have put some sort of guide or shallow groove at the 6.5" diameter to make trimming easier (they have a circle guide for component tweeter placement, why not one extra groove to show the 6.5" placement?)

For anyone looking to replace the speakers in their 2013 Grand Caravan, or if you are wondering if these will work with Polk audio speakers, these are perfect. I replaced the stock 6x9 front door speakers with a Polk MM6502 component set and just because I'm old school, I was going to make my own speaker adapters. That was until I went to Home Depot and saw how much a piece of 1/4" plexiglass was. I have been out of the car audio game for about 20 years and did not know how expensive plexi has become, so I ordered these instead. Apparently (based on a bunch of bad reviews) there a bunch of 6.5" speakers that require a larger cutout and you would have to open the hole, but the Polk 6.5" speakers dropped in with maybe 1/8" of play. I did have to make 4 holes for the speaker but I drilled them very small so the screws were still pretty snug going in. I read a bunch of reviews about these plates being flimsy and cracking and yes, they are fairly thin, but they are not brittle. If you get too close to the edge with a screw, or if you try to just run a screw through without a pilot hole you might crack the plastic, but if you drill a pilot hole and don't overtighten the screws (or go larger and use machine screws, nuts, and washers) you should have no issues. There were perfect for this install and they would have worked in the rear which also has 6x9 speakers. For the price these are great and I would not hesitate to use them again.

I thought this would be a plug and play but it wasn't. I had to drill all the holes for my new speakers to mount to this. Also, my new speakers didn't fit in the hole so I had to cut that out larger. The outer holes worked fine to mount to the old location. If I had it to do again I would cut my own out of some scrap since I had to do half the work anyway with these.

Got these to install my new NVX 6.5 inch component speakers. With my dremel and a pretty course sanding bit I was able to easily trim down the extra material, I then pre drilled my holes, probably too small even, and installed my midrange drivers with some foam tape to prevent vibrations. I had absolutely no issue with any cracking, once my drivers were installed the adapters were plenty sturdy. What you need to understand if you’re installing 6.5 inch drivers is that these are universal adapters. These are made to install 6.5” and 5.25” speakers in the majority of vehicles with 6x9 factory speakers. Think about it, 6.5” and 5.25” speakers are two very different sizes, the only way to make this adapter work with both is to leave some extra material. If you want 6.5” speaker adapters that are plug and play, then buy those. Also the screw holes may not quite line up with your car’s holes, that can easily be fixed with a box cutter or drill. You NEED to pre drill your holes for your speaker holes, it takes 10 seconds and will prevent the plastic from being stressed and cracking. Overall I think these are excellent adapters, especially for the price. Only change I would make is some guide lines for the 6.5” driver cutout like the tweeter area has, would not be hard to implement and make trimming these a much easier process. Overall as I said I think these are great, used them in the front doors of my ‘05 Ram 1500. As a bonus my midrange speakers even lined up perfectly with the grilles on the door panels!

Excelente opción, cumplió con mis expectativas, 100% recomendable, muy a gusto con mi compra!!!

16センチ×24センチの楕円型純正スピーカーから16センチのスピーカーにするために購入しました。 厚さは約５ミリ程度で材質はプラスチック製 ツイーター取り付け部はありますが、溝が掘ってあるだけでツイーター取り付けの際はホールソーで完全に穴を開けないと無理です。 また5.5～6.5インチまでのスピーカーに対応とのことですが6インチ【16センチ】でちょっとだけ余裕があるくらいです。 左右セットとなっていますが実際は同じものが2枚です。 スピーカーも同じものが2つってことがほとんどなので仕方がないことです。 ってことは！？コアキシャルスピーカーでツイーターの向きがある場合や向きを揃えたい！！って方は穴を開けてビス止めした方が良いです。 材質がプラスチック製なので剛性が不安ですが、ツイーター取り付け部以外は車体側のフレームに合いますので不安な方はツイーター取り付けの部に防振材を貼り付けてみては？ 自分はエーモン製の防振材を貼り付けてみました。 プラスチック製なので穴開け加工は容易です。 取り付け穴のピッチサイズを測るのを忘れてしまったため書けませんが、取り付け穴は加工せずそのまますんなり取り付けられましたので一般的なサイズだと思います。 値段は2000円程度だったので買いましたが、あまりにも高いと楕円型スピーカーを買った方が安上がりになると思いますので星3にしました。

Fit perfect for kicker upgrade front door to clear windows for 2019 ram

Fit my 6.5 speakers fine. Also for the 6x9 housing in the van just fine.

Buenas