BONTEC Universal Table Desk TV Stand, 22-65 Inch, Height Adjustable, 50 kg

As other reviews have mentioned, this does not quite fit the old Panasonic size of 660 x 320 but it is very easy to make it fit! My old Panny 42" plasma TV is still going strong but the original plastic pedestal stand was cracked. These are hard to find and expensive so I looked on Amazon for something that might be suitable instead and found this. My TV is a circa 2008 vintage TH-42PX80B just in case this is the same as yours and you are reading this to see if it will fit. I assembled the legs with no problems at all, the instructions are clear and everything is marked nicely. The little spanner supplied is pretty poor quality and will bend if you tighten the nuts and bolts too enthustiacally. The holes don't quite line up with the 320mm spacing on my TV but I simply opened up the top holes into ovals with a battery drill. You could also do this with a small round file. A selection of different screws were supplied - I used the M8 x 40mm which fitted my TV a treat. I had the choice of 3 different heights and I've initially set it up to be as high as possible. This gives a height of 145mm between the top of the TV unit and the bottom of the TV set - plenty of room for my Sky box and Blu-ray player. The space between the feet is about 640mm and they taper out slightly from back to front. If you want the screen lower then the lowest holes will leave a minimal gap between unit top and TV. The third height available is about halfway between these two. In summary, a good quality item, easy to assemble and feels sturdy enough when fitted. For £20 I am very pleased, Panasonic item is over £100 and even second hand stands were about £60.

This is brilliant and would recommend. We put them up on our TV. Took a few minutes to put the brackets on. It fits perfectly on the unit. Do pleased. And look at the price too! 😊

I must admit when I unpacked the stand and that it needed assembling thought I could have done better. Needing to use this stand in the caravan . In the event the stand was just what I wanted, although I did not need the extentions the stand was very easy to fit. Given the lenth of the arms on the base it made the TV very stable. This stand was just what I wanted and was well worth the money. I would recommend it especially in the caravan where you need it to be stable. It is also easy to take offf the TV when travelling.

Perfect fit, very stable!

Not best quality but does the job,,widely to put together

Good

Easy to mount make the tv stand safer where little children are good value for money looks stylish

Bought this to stand a heavy 42” plasma TV on a table - TV had previously been wall mounted. I was a bit concerned about some reviewers’ comments about flimsiness. Overall I’m pleased with this purchase - does the job, looks good, well made and came with lots of screws and other accessories that might be needed. I can now understand the criticisms by some reviewers - because the narrow feet don’t have any projections to the sides, the TV does wobble side to side if pushed a little - can imagine the legs could break if TV given a strong sideways push - not going to try this for obvious reasons! Would be less of an issue with a lighter LCD TV. Looking at alternative makes of this type of stand, expect they would all be much the same in this regard.

Bez większych problemów. Konstrukcja stabilna na 55 calach tak że na +

Perfect

Eficaz y simple.

Fonctionne bien mais reste instable pour une grosse tv. J’ai fixé les pieds sur le meuble

We needed a stand for an older TV and this kit was easy to install, is robust and fairly cheap. Overall a good buy.