12 Gauge 2 Conductor Electrical Wire 12 AWG Wire Stranded PVC Cord Oxygen-Free Copper Cable 100FT/30.5M for Outdoor Lighting Automotive Battery Solar Panel (12/2AWG-100FT)

While there isn't much to say about basic wires like this, I can only give my initial impression and first use/test.I needed to install two 5" wide LED light pods on the roof rack of my 4runner to light up the back for offroad use. So I need fairly durable, water proof, insulted 14-16 AWG wiring. The lights did not come with a wiring harness. As I strip the outer insulation to expose the 2 lead (red and black), the insulation feels really tight and thick. Also noticed it's pretty nice and flexible, not stiff. This leads me to believe that I should have a good connection that's protected from the outside elements of rain, sun, cold, snow, ice. The copper feels very nice and thick. Not thin and fragile. I like that! Good amount left over for future projects too!I will update, ONLY IF the wiring fails in the future. Otherwise, I'll leave my review at full 5 stars. I recommend it.

This is a nice heavy gauge cable for running LED Under Cabinet Light. Made my own jumper cables for the long spans to get up, over and down to get around sink and overhead microwave. (both 8'). Eliminates multiple large diameter plug connections within the 8' run. The needed plug connectors are a bit time consuming to attach, but when finished you have a nice clean job done. This cable was also about the same diameter as the electrical leads connected to the LED Light Bars that I installed. On a very positive note, this cable comes in a roll 9 (rather than folded) so your start with cable that does not have a bunch of "memory bends" locked every 5" into your cable.

Okay, this is cheap wire. But it is the best cheap wire I have ever found. I've been in the audio/video business for decades, so I know wire. I bought this to install a security siren in my own home. I didn't expect much. Again, it was just supposed to be a cheap piece of wire.This is good stuff. It unwinds with little or no memory; meaning it doesn't want to stay wound. It's very flexible. It feels quality. It strips easily and nicely. The conductor is very stranded of what appears to be good copper. You can easily tell the red conductor from the black.Again, I never thought I would take time to write a review on a few dollars worth of wire. I am just that impressed. Thank you!

I am writing the review of the 22awg wire. It is pretty flexible for PVC wire ( I am used to silicon based options ). the copper appears good. The outer jacket is easy to strip without cutting the individual jackets of the others. I used a 12awg stripper to cut the jacket.UPDATE: be cautions when using this for any outdoor items where you may use heat shrink. I’m not sure why this did not occur to me before I tried this, but while using heatshink with this wire, the entire outside jacket and individual wire jackets melted completely.. I was so used to silicon wire I did not take this into account. Overall, good wire, just be aware that heatgun and heatshink will not work with this.

This will work well where you may have wiring exposed to the elements and abrasive situations. Be aware that it is a heavy sheath that will require room to install. This is not for tight places on a vehicle. It will work great for trailer wiring and anything external on the vehicle. It is not easy to pull this through a firewall to install equipment inside the vehicle. If you need this heavy gauge of wire ran into the driver's compartment I would suggest something without the sheath. Overall it is a good product for what it is for.

Received as promised , correct length and the copper was of good quality and the silicone used to wrap it was good quality then and additional housing to keep both wires together but Seperate nice product great price , will buy agin

Unless you have a weird low voltage fetish, you'll probably at best feel a little smug in knowing you have purchased a good product.

I ran this through the roll cage on my Polaris rzr seems to be heavy duty and should last a long time , but only time will tell.

Excellent quality copper wire. The outer, black jacket is very soft, which contributes to its incredible flexibility. Because of this, I found stripping it to be a bit of a delicate process. I was not able to use my wire strippers on the outer jacket. I ended up carefully slicing the jacket about one inch length way on the black/negative side and then I peeled it like a banana. This is the best wire I've found on Amazon and I will definitely be buying more for future projects. Only wish I could buy this wire in 250 foot rolls. Great product and quick delivery. Very pleased!

utilisation pour apporter courant dessous frame de véhicule vers lampe LED bumper. FIL non protéger des intempéries sera parfait car fil de très bonne qualité.

Missing cut string so hard to strip . Outer sheath is not very flexible.

Wish it wasn't covered. Hard to remove without breaking wire

Very thin, well insulated, does what it's supposed to. Recommended!