HDMI to USB-C Adapter Cable 6.6FT 4K60Hz for AR Glasses & Displays

I needed to send HDMI from My Mac Mini M1 to a LG Ultrafine Monitor that has only USB-C inputs. This special unidirectional HDMI to USB-C powered by a USB-A worked fantastic !!!!! Now I can Hold off upgrading my Mac Mini-M! for a few years and still use two $K monitors

Edit: the replacement cable arrived and it does not have the screen flicker issue. I also got a female-female usb c adapter that I now connect this cable to and then the original cable to the Air 2. It’s perfect and is cheaper than buying pricey and clunky adapters. I now have this cable to connect to any hdmi device I want, pc, PlayStation etc I bought this specifically to connect any hdmi device to my Xreal Air 2 glasses. It works! Except the video cuts out a few seconds in to using. And stays out for a second or two. I have ordered a replacement to see if that is the issue, if this cable is truly faulty. I have tried to wiggle the cable at the usb-c end to see if it makes the video come back but it’s too inconsistent to say it’s not the cable being faulty. I have also now ordered a usb c female-female coupler to compliment this cable. The cable is good quality build as it appears. However the usb c end is too stiff and at a straight angle that it makes wearing it on the glasses uncomfortable. I will connect this cable to the original cable that came with the glasses. I do want to say I have tested this cable with my steam deck via a hub, my PC and my PS4. The video cut out happens with all devices and almost like clock work. Hopefully I will remember to come back and update this after I receive my replacement.

Don't usually leave reviews, but I bought the 10 ft one. Works perfectly with an Arzopa 1080 144hz monitor and a PS5.

This cable works as advertised, but I have concerns about how reliable it will be due to how hot the HDMI end of the cable gets during use. It's hot enough that I wouldn't feel comfortable having this tightly packed with other cables or electronics during use. As the description states, the USB-A connection is only for powering the HDMI to USB-C converter chips inside the HDMI end of the cable. It does not power the display device receiving the USB-C cable. Based on my testing it seemed like there may be a little power making it to the display device, but not enough to be significant in anyway. When I connected this device to a charger with a power output measurement LCD on it, it said the cable was drawing about 1W normally with occasional measurements up to 2W. So, I was surprised after about an hour of use that the HDMI connector was very hot to the touch. If you plan on using this with an XREAL Beam, you might consider Fairikabe's other model cable that has both USB-A and a USB-C power connectors. That cable does output a bit more power for the display device. Though I was disappointed it seemed to cap out at 4W on my XREAL Beam which typically pulls 18W from a standard USB-C charging cable. In the attached pictures this cable is identified as "Old Fairikabe USB-A" and you'll see that it draws 1W compared to the newer "Fairikabe USB-C" cable that draws 4W when connected to my XREAL Beam. Ignore the 0W reading on the new Fairikabe picture for the USB-A connection - it's drawing power from USB-C only.

Unfortunately it didn't work for me. I recognize these types of cables can be hit or miss, at least they have been for me, so I'm always cautiously optimistic when I purchase one. I ran it from my Mac Studio HDMI output to my Apple XDR monitor thunderbolt/usb-c input and didn't expect to get the full 6k resolution: half of that would have been fine. But I just couldn't get any signal from the Mac at all. Now I'll continue looking for anther one that MIGHT work for me.

I've been waiting for something like this for a while now. I have a AOC Portable LCD and it's limited to use with a laptop with a powered USB-C output. I could not use it with any device with HDMI to USB-C because that's actually reverse direction and the monitor side has to a HDMI and not the other way around. This cable solves the issue by taking the HDMI output and change it to USB-C data and there's the extra USB connector that plugs into the same device or a power adaptor that sends power to that the AOC Portable LCD can turn on. Only concern I have is the HDMI connector gets very hot, so I may need to attach a small heat sink to dissipate some heat to prolong the device's MTBF.

This cable is perfect if you want to send HDMI signal to your AR glasses, and power them at same time. This is HDMI signal and USB-A power to USB-C Dislpay port to for example AR glasses. Does not work th other way. USB-A power should comw form a different source than the HDMI.

this worked great on an Asus MB166C portable monitor. When I first plugged it in a message came up that the monitor was out of range. Asus website said you have to install Monitor Drivers first before using. After much confusion I went on forums and found that if computer shows out of range then reboot and it will fix it. That worked and it worked great after that.

Excelente cable, funciona muy bien y el envio super rapido.

Good Product, Good Value, Works Well.

Cable works as described! Connecting laptop HDMI to portable monitor which requires USB-C.

الحل الوحيد للي يبي يشبك البلايستيشن بمدخل يو اس بي سي على حسب ما بحثت عيبه بعض المرات اذا شغلت قناة اليو اس بي سي مايلقط ويبي اك تعيد كذا مرة

item as described. works perfectly for my xreal one pro. This is HDMI to USB-C output (for console or PC display output), not the more commonly found and cheaper USB-C to HDMI.