DJ710 Dual Spindle Dowel Jointer,Wood Dowels Joiner,with two 8mm and 6mm bits,Wooden Dowel Pins 80pcs,Biscuit Joiner

I bought this to drill dowel holes for 4 U-shaped shelves (3 pieces, each) for a closet turned into a kitchen pantry. I knew the dowels would not be strong enough without a bracket on each side, but I needed a way to align the shelves before filling the gaps, sanding and painting. I've never done anything like this before. Building U-shaped shelving and drilling holes for dowels is all new to me. It worked very well. I have several Festool tools and this is certainly not the quality & feel of a Festool, nor is it anywhere near the price! I adjusted the tool to my needs and tested it on some scrap pieces of shelving before using it on the actual shelving pieces. I made marks on the pieces so that I could align them on a table before marketing the dowel locations. (Tip: Use a 7mm mechanical pencil. You want as narrow a line as possible.) Based on the tool's user manual, I choose 2.5" from each side and choose the 5mm dowel size for the 3/4" baltic birch plywood I was using; 4 holes on the left U piece and 4 holes on the right U piece, matching 8 hold drilled into the large shelving piece that goes against the back wall. I have a Festool dust extractor and was able to attach the vacuum hose with a hose adapter that I bought and tape (because the adapter was close but not the correct size.) You may be wondering, how was I able to assemble the shelving with the dowels, since the shelving was cut to the length of the side walls. That's a very good question! The trick was to tilt the shelving up to allow enough clearance to have sufficient spacking to slide the pieces together. I did it by myself using scrap pieces of wood to hold the shelving at an angle while I put them together. Definitely not easy, and it took some trial and error! I'm sure it would have been easier if I had help, but I was on a roll and didn't want to wait for my wife to come home. All told, the tool worked great. I think biscuits would have proven a lot easier, but I didn't even know what biscuits were until I started this project! (I'd seen a bag of biscuits at Harbor Freight Tools before, and had no idea what their purpose was.) I hope this helps everyone interested in this tool.

Unbeatable value. I've had my eye on the festool domino for years but never could justify spending the money. This is a great alternative. Effective, efficient, powerful, and overall well thought out product. I would recommend this for a anyone looking for a solid non biscuit joiner.

It is difficult to find a good tool for joining pieces of wood if your budget does not allow for the Festool Domino. So this chinese dowel tool comes in at a very attractive price. But, make no mistake, it is obviously in a totally different league. To start with, these are dowels, not dominoes. And the quality is definitely a few notches below. BUT... with a little DIY fine tuning, this will actually get the job done in far more instances than it has any right to. The biggest issue is the alignment of the centering mark (which is etched on a plastic window) relative to the dual drill bits. If the work you are doing is rough and millimeter accuracy is not needed, this will not create a problem. And if you need better alignment, you can simply enlarge the holes that are used to secure the plastic window and move it a bit. (there are YT videos that talk about how to do it). Don't let the negative reviews scare you. It is not perfect but it will get the job done in many instances. And the few issues can be addressed with a little time and elbow grease

I have only had this a day so this may change but...the rubber slip pads are spring loaded so there is no problem getting 100% sure fence-to-work...the alignment of the two drill bits is excellent, both in same horizontal plane as well as I can measure...power is fine...switch works well...very slight adjustment need to get fence at 90deg, set that with square and results are excellent...getting alignment of face frame joint flush in the two essential parameters to within a few thou, which means after glue up you just sand/plane to a perfect frame. The Triton which this is a copy of had some issues a few years ago according to video reviews; these have been addressed here. Again, no comment on durability since only a day but the thing feels and sound solid. I might disassemble to smooth and oil the plunge mechanism but it works well out of box.

Following up on my previous review on this product, I want to say, I have finally put this machine to the test. I had to put together some panels for some doors, and it did a magnificent job. I can proudly say, I have a great tool. I will now upgrade my stars to four, I will keep the other for my trouble.

Not easy to use on large assemblies. Not square to the part and as others said, the alignment guide is not accurate.

Muy buen producto lo recomiendo , buena calidad

I used this on a crib I built out of walnut. It is very accurate. I drilled 500 dowel holes with absolutely no issues. I can’t attest to longevity, because I’ve only used it on one project, but it was a big one and it preformed exceptionally well.

Damage after first use Is there a way to return or claim my payment back

Rápido, seguro, eficiente y preciso. Por el precio es mucho más de lo que esperaba. El único detalle que veo, es que no encuentro refacción de los usillos por si se desgastan o dañan

Excelente herramienta para realizar el trabajo de perforación para unión de dos piezas de madera. Precio - beneficio, excelente

Rápido y practico el ensamble solo hay que calibrar bien