House Tuning Round Bar Clamp Bracket Kit - Pack 4 Clamps, Roof Cage Holder for 1 1/8" Bar

Did what it was supposed to do. The grip on these are great as I didn't even tighten them by hand and the guard stayed in place. Did exactly what I wanted them to do.

Pretty good, typical of what you see here on Amazon, no better no worse. They are thick and they stay in place. Included all the hardware as well as an allen wrench.

For the price these are awesome. The most solid mount I found. I had to return four other products to amazon before i found these .

These worked exactly as I needed. I used them to mount an air horn on my motorcycle. Perfect fit and streamlined. Thx

Like

I used these to attach a 37lb awning to the stock FJ Cruiser roof rack. With a little planning and aluminum bar stock, I ended up with a nice clean installation that I can quickly detach and reattach. Took the rig off-roading and camping for 3 days and the awning didn't move. Most folks just leave their awnings attached and I did not want that. The matte finish is great and the rubber lining kept my roof rack from getting scratched up. I was not a big fan of the Alan head screws. They were a little hard to tighten and the screws seem like they should be larger diameter. Other than that, this is a great product and great price compared to other similar items.

I used this mount to install an LED headlight for my 2016 Honda CRF 450 R. It was a perfect fit, One thing I did not like is that the bolts are mounted from the bottom which depending how you are going to mount it might be a problem. The bolts are hidden and it’s very aesthetically pleasing, and nice because water and stuff won’t get caught up in the bolts.

bought this to add lights to an ATV the length of the banner(attachment area) and description of product is to add a piece like a strap between clamps to add lights, tools etc. I used them and drilled through and slotted the clamp to put marker lights on them individually. The mounting flange pinch clamp i torqued to 43 inch lbs, and it is very solid. this is with the rubber shim stock installed to make 3/4" -19mm size. I drilled #29 wire gauge and tapped 8-32 threads and attached lights. The clamps have what appear to be stainless screws W/lock washers. This is a product i will purchase again. The top screw of the light i drilled on the edge of the clamp screw with out a total hole the bit came out the contact surface of the cap to the body and i tapped threads all the way through from the outside of the clamp to the inner diameter and only have about 1/8 inch threads and was able to tighten the screws up tight enough to not worry about light coming loose, lots of meat there.