Bestview5-In-1 LED Rear Fog Light Assembly Kits Compatible for 2011-2021 Subaru WRX STI Impreza XV Crosstrek, Function as Tail Brake Backup Reverse Turn Signal Lights (Smoke Len)

Great product for the price installed in about 20 minutes I have a 2020 WRX and if you ground the black wire to the chassis of the car instead of a wire the sequential turn signals when you use the hazards blink at the same time.Quick reference the white wire is the ground wire on all the lights.Brown wire going to the brake lights is in the plug if you have stock tail lights go to the blue wire from the F1 lightGreen wire on car is parking lights/marker lights. I personally wired the red wire from F1 light to the left green wire(left rear marker light)you should have to tap into 4 different wires on one side and one wire on the passenger side and the ground wire going to the chassis ( I personally wired my ground to the second trunk latch bolt because it’s hidden behind the trim and the hazard lights work normal on the F1 light if you wire the ground to a tail light ground wire when you use the hazards the opposite side will flash slower than the other.

Me gustó mucho

Complex to install but that’s what it takes for such a device to work

Once you get down the wiring it’s quite easy to finish. I love this light although I wish it flashed when I braked but that’s more than okay the blinkers make up for it 100%!

Easy to install, good price and looks great!

This product worked perfectly for a few months, then part of the leds already burned out. Kinda disappointed that it failed so quickly but besides that it worked perfectly even with the lack of instructions provided.

The media could not be loaded. I spent a lot of time debating on which type of F1/rear fog light to get. There's just so many options and styles. I opted out of getting the traditional strobe style brake light, simply because I take my daughter to school in the morning and end up in a pretty long line of cars and didn't want to drive the people behind me insane. When I saw the turn signals on this one, I knew I had to give it a try.Install is about the same as most of these, you pop off the accessory cover and it slips right in. There are small hooks on the bottom of the bracket that slip right onto the mount. There are two holes on either side of the bracket to secure it. You'll need some push in trim retainers (or you could use zip ties if you really wanted to). The wires are nice and long with plenty of reach to make it to your harness wires. I already had a harness interconnect but since these include turn signals you'll have to run one wire to one side or the other. They include wire mating clamps, which is nice, just be sure to check all light functions before you put the trim in the trunk back in.As far as function, it's great. The lights are nice and bright and the tracing of the turn signals add a really cool touch. We'll have to wait and see how well the housing holds up over time to things like moisture intrusion, but so far I am very impressed.

The media could not be loaded. Fits perfectly in place! Looks & works perfectly! Looks as valuable as it would on that Aftermarket site costing $150+. Major downhill side is you’d have to look all over the internet for the proper wiring because what you see as described isn’t completely accurate on certain WRX. That and I couldn’t find a 5-1 harness.I’d strongly recommend buying the red wire taps for the one included isn’t very reliable. That and 2 wiring harness that’s so you don’t harm any OEM wires. I couldn’t find any 5 in 1 harness on here but You can get away with the 4-1 harness but you’d have to wire tap both the yellow wire (Left Turn Signals) and Green Wire (Right Turn Signals). But those special harnesses and just wire tap the yellow wire to the driver side brown wire on aftermarket harness.. Also tap the Yellow wire to the brown wire on the passenger side and boom it all works!