Air Jack, 3 Ton/6600 LBS Triple Bag Air Jack Lifting Height 16Inch, Pneumatic Air Jack 6600LBS Capacity Extremely Fast Lifting Action (3 Ton)

Let me come out and say it. This is by far my favorite jack. Why? I hate, hate, hate jacking up a car. I guess it is the work involved when pumping up a hydraulic floor jack and crawling on the ground to spot the jack etc. My garage is a little cramped so I cannot use a long handled, commercial style floor jack. I use the shorter style, wheeled hydraulic floor jack which is what I believe most people are using also. These jacks always left me thinking there has to be a better way to do this. I looked into other types of powered jacks and the air bag style is the one that looked like it was beefy enough to last many years and was low enough to fit under most of my cars. This jack makes jacking up a car very easy and quick. I have had this jack for about five years and have had nothing break or fail. It makes a jacking up a car much less work, especially if you have to jack up the car several times in different places. Now let me tell you about some precautions that you have to do while using this jack. This jack is to be only used to pick the car up or down. It will pick the car up in seconds, so take another second to slide a jack stand or two under the car. No exceptions! If your not going to this, don't buy this jack. Don't use it to by itself to crawl under the car. Here's why I say this, when the jack is jacked up high, it does sway a slight amount. It is not excessive by any means but it is there. The air bag has some sort of telescoping cylinder inside that somewhat locks which helps with this. There are other style jacks that sway also so don't fret (bumper/scissor). Second issue is if you are laying under the car and move around, there is a possibility that you could accidently touch the down air valve with your body. The jack goes down a lot slower than it goes up which is a good thing in this case. Again, don't use the jack by itself. Last issue is when letting the vehicle down it can be a little jerky sometimes due to the telescoping mechanism mentioned earlier. Go slow when letting the jack down, which you should do any way. If you don't take shortcuts, this jack is for you. I won't go ever back to hydraulic.

Works great for DIY shop

Jack works well as advertised. There are plenty of safety warnings (in bad English, but missing English units, e.g. for pressure) but assembly directions would have helped. I assembled it entirely from the small picture. Especially useful would be information on how to attach the air pressure tube to the valve assembly in the handle.

I've used this jack for almost a year now and am very happy. I've used it to lift either the front or rear end of a number of vehicles including a Camry, Corolla, Solara, Landcruiser, Transit 1500 van, and more. The unit is reliable but I do have one recommendation - remove the screws and apply Loctite or your favorite medium strength thread locker. The screws came loose and air started to slowly leak. About 4-6 months after applying blue medium strength Loctite, I've not had a problem since. As a reminder, always use properly rated jack stands with any jack, including this one.

Used this first time today. Oil change on two cars. Also bought low profile ramps so I can fit it under my 300C which hugs the road like a dust-buster. To lower as far as possible, simply purge pressure, press jack down by hand, then close release valve and it will hold itself down. I have a 20 gal. 150 PSI compressor. More than enough. Lift is VERY fast and yet very controllable. Top rubber pad is very good for protecting lift surface. Wish I had bought this long ago. I'll be using the heck out of it. Quality seems very good. It was necessary to replace the air inlet fitting with standard 1/4 inch adaptor. Instructions are in ENGRISH of course but anyone who will be using this jack will no doubt be able to noodle it out. Very simple and minor assembly. I was a bit disappointed that I received an allen wrench for the base assembly but not for the handle. No biggie. Get yerself one o these!

I am a mobile mechanic, and I'm always looking for Tools that make my job faster. I came across this on Amazon I knew that this would be something that can potentially make my life easier. Went ahead and purchased it and received the product a few days later. The packaging was okay, there was a lot of loose nuts and bolts that I had to put together, but it's not a big deal. As other users have noted the air Inlet fitting is a weird size so you will have to replace it from one at Home Depot or another hardware store. I set it all up and then on my first use I was sold, this thing lifts up almost anything it's fast it's efficient and I can't believe I've been working without it. If you find yourself lifting up cars all the time, I would really recommend spending the money and buy a new one.

Con, it does not lift my expedition tires completely off the ground. Sounds bad right? No it's good for me. I hit maximum lift height. it lifted the SUV up in 5 seconds or less. I don't see an adapter to raise the height another 2 inches. I could place something under the jack. Just to be safe I use a floor jack anyway, three pumps with the floor jack and good to go. All the weight is already lifted with the air jack. Cuts the effort way down swapping stud tires off and back on come winter.

I was excited to get this jack. I was tired of using the hand jack. Literally finished putting the jack together and put it on the ground to test. Picked up the handle to move the jack and the handle broke away from the bracket on the jack at the weld points. Tried to return it to Amazon and replace with another but this item is not returnable. Amazon says you have to contact the company directly. Wrote the company, which is in China, and have not heard back on the replacement of the part. I haven't even had the opportunity to try the jack yet.