Digital Multimeter, True RMS 6000 Counts Auto-Ranging Volt Meter for Automotive & Home Electrical Troubleshooting, AC/DC Voltage Current Resistance Continuity Capacitance Temperature Tester

Highly Accurate, Fast, and Easy to Use!This AstroAI multimeter is an incredible tool. The auto-ranging feature works flawlessly and saves a ton of time, while the 6000-count TRMS display gives fast, precise, and highly reliable readings. It is packed with features for testing voltage, resistance, and troubleshooting automotive or household issues. It feels durable, well-made, and functions beautifully. Highly recommended!

Covers Way More Than Basic Measurements What I like is how much it can do without feeling complicated. I’ve used it for: Voltage and current checks Resistance and continuity Capacitance testing Diodes and basic troubleshooting Having all of that in one tool keeps me from switching between meters. Auto-Ranging Keeps It Simple I don’t have to think about ranges—it figures it out. That’s especially nice when I’m quickly checking something and don’t want to dial settings manually. Reliable for Most Bench Tasks For things like PSU repairs, Xbox work, and general electronics, it’s been accurate enough for what I need. The readings feel stable and consistent. Continuity Beep Is Fast (Which Matters) This is something I didn’t think about until I used it—the continuity response is quick. That makes tracing connections a lot less frustrating. Extra Features I Actually Use The temperature probe and duty cycle measurement aren’t things I use constantly, but when I need them, they’re there—which is a nice bonus. Good Balance Between Price and Function It’s not a high-end lab meter, but it doesn’t feel cheap either. For the price, it hits a really good middle ground.

This is very serviceable and rugged intermediate precision meter (400 count) which operates correctly on all scales. However, the instructions are incorrect in several areas, as the external current clamp is meant to operate in voltage mode, yet the instructions suggest operating it in current more. Also, the external temperature probe does not work. In final analysis, given the relatively low cost, this meter still represents a very good value in a solidly built package.

Surprised by features and quality of this meter (AstroAI DM6000AR). In particular, I was interested in the capacitor measurement function. Most meters only go up to about 200uf. This meter goes up 20,000uf. The temperature measurement feature is a nice bonus. My old eyes also really like the large format display. Can't beat what it offers for the price.

It's been a reliable and accurate meter for a few years now. I use it mostly for circuit repair, and it works a treat. The continuity test beeps very quickly, and the autoranging is quick, which makes testing swift and easy. The screen is large and quite legible. It has spent some time in my toolbag and shows minimal wear. The supplied leads have low resistance which makes testing more accurate. The blue backlight is acceptably bright, though I never use it. A great meter for the money.

I am absolutely thrilled with this AstroAI DM6000AR multimeter. It's hands down a five-star product! The performance and features you get for the price are incredible. This is a great deal for the price, especially when you compare it to all the other multimeters out there that do the same thing (or even less!) but cost significantly more money. The meter feels solid, the TRUE-RMS function is a must-have, and the 6000-count display is bright and clear. It comes with everything you need right out of the box, including quality test leads,temperature probe and a magnet clip to hang your multimeter as you can see in the picture which is very convenient. So if you're looking for a reliable, feature-rich multimeter without breaking the bank, stop looking and just buy this one. Highly recommended!

Multi meter has handy physical features. Magnetic hanger on door of breaker box and standup holder for flat display on a workbench. Big easy to read display. Connot comment on current measurements because I haven’t used it that way yet.

I believe the design is essentially one that uses the cheapest parts that still provide mostly high quality measurements. I don't expect it to last forever and I already own broken multimeters. I thought my best multimeter (USA brand, $80, but also made in China) just went on the blink which is the reason why I bought this one. I made the mistake of not testing its battery with a load on it. Its display lit up bright but went into crazy and the battery tested at 9.5v. Shame on me for not testing the battery properly. I use my cheap H.F. multimeter for testing 1.5 & 9v batteries since it can test them properly but often I'm lazy and only apply the voltage test which bit me here. Zinc carbon batteries are notorious for sometimes testing at a high voltage even when dead. "Lucky" for me I accidentally discovered the battery was dead when I received my new multimeter. (I put the dead battery in the new DM6000AR and it acts completely dead unlike in my more expensive multimeter which displays, albeit incoherently.) I'm currently in the process of taking down my over-the-range microwave oven to replace what I expect to be a blown thermal fuse. I've had to test ceramic fuses on two microwaves already so I'm aware of the potential difficulties and hazards. Fuses were on my mind when I bought this multimeter so I looked to see how easy it would be to get replacement fuses (and how much it will cost). I googled 400mA and 10A ceramic 600V 6x30mm fuses. I came up with very little. I went to a link target and saw two reviews there from people that bought that fuse (probably both people for this multimeter) and one of the reviewers posted a picture showing the received fuse was longer than 30mm and it could not be made to work (later I found what I believe is the same person included the photo in a review here too). I contacted AstroAI for sources for fuses and was advised on how to search. I emailed back and was given more search advice. Still, my options were little better after having completely wasted a large chunk of time. (I did find that when you need one fuse, you will probably have to buy 5 or even 10 of the same. Amazon may not be the best source for fuses.) I emailed back and I was sent three links to specific fuses. None ideal for bother now, but at least AstroAI finally helped. All three times I emailed, AstroAI quickly responded. Hopefully, you'll never need a fuse, but here's what I found out by searching and conversing with AstroAI. You may have to or want to settle for 250V instead of 600V - this will guarantee more choices. You can use .5A (500mA) instead of 400mA. You can use Slow Blow fuses instead of Fast Blow but I wonder if this is mostly only if you are getting 250V instead of 600V - probably not, but it might be best. In all cases, look only at size 6x30mm and ceramic, not glass. I just now see another reviewer who contacted AstroAI a couple years ago about fuses ended up buying BOJACK brand fuses (18 pieces each) but got glass fuses. I think glass is wrong and also less safe. I timed the backlight (turned on by holding the H button until it comes on) at 13 fixed short seconds. On an unrelated note, others have reported that pressing the Select button while turning on disables Auto Power Off (normally APO on display) (lasts for one session) so the multimeter doesn't shutdown after 15 minutes. While in this state, supposedly, it will beep every 15 minutes as a reminder. The reason I rounded 4 1/2 stars up to 5, is because the included bitsy manual says 3 year warranty (I'll disregard the nebulous "normal wear and tear of mechanical components" disclaimer). Weird that the warranty is nowhere stated on this Amazon page, and when I clicked on the warranty info link, Amazon sent me to a useless broken page that screws with my browser. The link to a pdf/printable manual provided by the first/top reviewer was appreciated although it has (I believe exactly) three differences (from the included tiny script) since it must be an older manual. It shows there used to be only a one year warranty and the fuses used to be a much larger size. I just now see there is also a link provided by AstroAI to a pdf manual which has the (updated) three year warranty but it still gives the old or wrong (10x38mm) fuse size!!! And both of the pdf's have a picture of the multimeter but it's model WH5000A (not DM6000AR) although otherwise identical including "6000 COUNTS". I just searched and found a report that the DM6000AR been remarketed in the West from the Kuman WH5000A. Reviewers liked the magnet which I immediately ditched. I folded some scotch tape on the flimsy kickstand because otherwise it's too flush to pull out. I reserve the right to downgrade my rating because AstroAI states on this page: "Batteries : 1 Lithium Metal batteries required. (included)" before it eventually states "Zinc Carbon" which is not the same nor as good.

Great for the price does more than what I needed but happy it's accurate

Super outil indispensable pour la bidouille

Aun no lo uso pero parase que es muy buena calidad

Il multimetro arrivato è nuovo, sigillato e completo di accessori come in descrizione. Si presta bene ad un uso semiprofessionale e domestico. E' inoltre possibile registrare il prodotto sul sito web del produttore, estendendo così la garanzia a 3 anni. Soddisfatto. ATTENZIONE: esiste sul marketplace un' imitazione di altro brand facilmente riconoscibile per estetica e caratteristiche, assolutamente non affidabile e fornito con pinzette a coccodrillo sottodimensionate per il range di misura AC - DC 10A. Da diffidare.

Good meter with many features and accessories not usually supplied on other multimeters, transistor tester, thermometer, and magnetic hanging loop. Good backlit display, but doesnt stay illuminated for long,there may be a way of changing this, just need to look it up. Inexpensive meter, already have digital clampmeter from this manufacturer, no problems.