STINGER Jeep Wrangler AHD/CVBS Dual Blind Spot Camera Kit (Set of Two) (Standard Jeep Wrangler JL/Gladiator JT)

I installed these blind spot cameras on my 2020 Jeep Gladiator and connected them to my Stinger aftermarket stereo — they work great. The image quality is clear, and the visibility they provide on both sides really helps with lane changes and parking. Installation was straightforward, and integration with the Stinger unit was smooth. A solid upgrade for added safety and convenience on the road. Highly recommend for Gladiator owners or anyone adding cameras to a custom stereo system.

I got these to go with my Stinger Heigh10. The installation instructions don’t show how to wire it to the head unit. It turns out that you extend the cords with the included extension cords by pulling them apart where they look like they would match on each camera wire. Red with red, and white with white. Then at the head unit, you pull it out and plug the yellow plugs into any available yellow camera inputs. I used 3 and 4. Ignore the trigger wire inputs. On the head unit wiring, there is a 12v power output where one is red, and one is black, that look like where your wires go. Pull back the clear plastic protecting them, and put red to red, crimp it together, then pull the protecting plastic back. That will power the cameras - both reds for both the cameras in there. Now do the same with the black wires - put them both in the black one and crimp them to ground them. The last step will be, after replacing your radio, to add the cameras to the software and they have a video on that. I was glad I did this while installing the heigh10, I wouldn’t have wanted to pull it out again. They do a great job, and come on when you’re moving over 5mph and you turn on your blinker. You can also access them through the menu. It takes about one second to come up after the blinker is on, but I don’t mind.

Products work better than expected. the only thing that sucks is the delay time between flipping the turn signal on and the cameras starting. So be aware of this before adding them to the stinger unit.

How to send the cameras back because I found out that you had to buy a whole new head unit for your car in order to make these things work I like my Alpine so I sent them back

Works great with the Stinger Heigh10 head unit.

Bought these for our Jeep. Helps with blind spots when switching lanes for sure. Had a problem with one of the cameras and the company sent us the parts we needed to fix it.

When going to monitor after putting on turn signal delay is is long.

Cameras work greater with Stinger HEIGH10+