Satellites Zone1 Dish Kit for SKY/Freesat/Astra/Polesat/Hotbird/Full HD, Latest MK4 Dish with Quad LNB, 10M RG6 Black Cable, Signal Finder Satellite TV Finder, Brackets, Bolts, F Connectors

Needed a dish for my summerhouse.This came with everything including signal meter which worked well and set up in no time.Now have perfect reception with all the channels including HD.There was a couple of nuts missing but seller responded straight away and sent them next day.

Amazing value for money 5 star 🌟

Just finished installing this dish. Wasn’t too bad. Could have done with a couple of extra nuts but you can always buy a couple and make the dish more rigid in strong winds. Not bad though. Used youtube to find how to assemble. Loads of videos of exact same dish so no problems. These are the same dishes that sky use for new customers because the sky logo is actually imprinted on the arm bracket, also it is the itentical dish and lnb that was installed on my neighbours house when they had sky installed. I didn’t bother with the sat finder because although it finds satellites it doesn’t tell you which one and there are loads of them so you could be there for a while. I downloaded a great free app called satellite finder pro. Once installed on your phone it gives you a selection of satellites to chose from. I selected one of the astra satellites there are about 3 or 4 to chose from the one I selected was astra 2A/B/C/D/F/G (east 28.2 ) this is the one with all the usual uk channels. Once you selected it shows a live compass of where in the sky your satellite is, just put your phone against the lnb and the screen tells you to move the dish exactly where the satellite is. When the dish finds the satellite your phone gives a loud beep. Tighten the nuts on the dish and tune your tv in. really easy and saves loads of time trying to find the right position in the sky. Great little app. You need a 10mm masonry bit for the wall mounting bracket and a 13mm spanner for the wall bracket screws. You also need a 10mm spanner for the nuts on the arm. The 4 black screws that attach the dish to the arm are a bit tough to screw in at first. What I did was started the screw holes without the dish first just so you have a good grip. Just tighten with a Philips screwdriver. The lnb has a pulldown plastic cap on the end so when it’s all set up just pull the cap and it covers the connectors as protection from the elements, nice feature. Lots of cable clips too although a few more cable ties would have been nice, only came with 2, used them to secure the excess cable to the dish arm to make it nice and neat. All in all a decent dish with some minor improvements needed but for £38 and a couple of hours work I’ve saved myself a few quid. I was quoted £120 by an installer.Hope this helps.

delivery was a day early looks a sturdy product I have not set it up yet but pleased with the quality and early delivery. I will write another review when it is all set up. there is one little snag you have to use the self tapping screws to tap the holes out on the bracket which can be a bit fiddley but apart from that everything looks good.As promised here is an update now I have installed the sat-dish. It does work great, however it can be tricky to set up and tune to a satellite. I used the sat-finder included in the pack tuned to the strongest signal but could not load any stations so I had to tune it using my tv and setting up by eye and compass. the hard bit is setting up the elevation of the dish this is how I did it, I aimed the dish at the horizon in a SE direction as near as I could get it and tuned the tv on and the strongest channels were picked up changed channels to the weakest one that was breaking up and then adjust the elevation slightly till a clear picture and then tune to the next weakest station then adjust horizontally till picture is good, remember adjustments should only be by half inch at a time. works great for me. definitely worth the effort. great buy at the price. really recommend this sat-dish.

The dish is good and liked that it had all the required parts but the instructions were incomprehensible. In the end, I threw them out and fingered it out myself.