Rust-Oleum Home Floor Coating Ultra White Tint Base Base Coat Quart (Pack of 1)

This was my first time painting a floor. This product took the guesswork out of this process. It’s worked so well, I’m about to paint the floor in my master bath.

I just don't think you get enough product for your money, but where do you nowadays! It goes on very easy and clean up was also easy and fast. I wish the sealer wash thicker and time will tell. Be sure to PREP, PREP, PREP! I used this on our kitchen counter (approx. 100 square feet) and while it did cover 2 coats it still looked thin and maybe easily scratched off, we purchased another can of base and put 3 coats of base, 2 coats of sealer. Looks Very Nice, and as far as durability, again, time will tell.

I loved this easily applied rustoleum product. I had wanted to update out guest bath and decided to paint the old yellowed tile, instead of getting new tile. For $26 I transformed the bathroom. It is stunning. I love it so much and it was so easy, I am now painting over the terrible tile in my children’s bathroom. This is my most successful DIY EVER!!

Yellow color in the 2 cans I recieved. Not a true white like the other can i got. So annoyed. I have to repaint .. yet again

this was just OK. It was kind of a pain in the butt to use. I also followed the directions exactly and made sure the floor was very very clean. It's not very durable. I would say I've had it down on the floor for about two months now and it doesn't look great. also I let the clearcoat cure for like five days and still dirt and hair stick to it. I would not recommend.

Here are my FYI’s after doing this project on linoleum in a bathroom:Used the Frog Tape for taping off trim, etc. It took from Saturday-Tuesday just for drying all the coats and removing tape/touch-up below. I waited 1 full week before carefully moving furniture/décor items back.Used 1 qt can for 51 sf, 3 coats color and 2 coats clear, with some left over for touch-up.I put on the same clean socks on before going in after each application. I left the lights on to make it warmer, closed the door and refrained from using an oscillating fan in fear of it kicking up dust, etc.Used a 3” foam brush to cut in edges and other odd spots. When applying the edge paint, it will seem ‘thin’ and won’t seem to cover. Rest assured it will begin to cover as more layers are applied.It’s good to have paper towel and spray cleaner on hand to wipe the little oopsies while painting. However, paint oopsies can be removed after the fact with a cotton swab and acetone, just don’t get the swab soaking wet so it doesn’t drip. It may take multiple swabs depending on the amount of paint to be cleaned up.The clear coat will make the black paint appear blue and milky during application/while wet, but don’t worry, it will look black again once it dries. I’m not sure how other colors are affected by the topcoat application. Reminds me of Elmer’s glue, especially when you get it on your hands.Keep any brushes/rollers with your paint color wrapped tightly and separately in plastic shopping bags until you are completely done with the project. Why? In case you have to go back and touch-up during/after the topcoat application. After my first topcoat (as other reviewers have mentioned) some things may come to the surface. I gently removed them, then used my saved black foam brush to touch up those spots and 3 hrs later, I touched them up again. They will appear darker until fully dry. Then 3 hrs later I went back over with another coat. 24 hrs later I did another topcoat. I left the tape up while applying the top/clear coat.I ended up using a small utility knife to force cut the seal of the tape to avoid extra pulling 24 hrs after the 2nd topcoat was dry. If an area of tape is being difficult to remove even after cutting, I found placing a finger or something on the floor near trim while removing tape may reduce some over-pull. Although, I did have to go back and touch-up some spots using a very small artist-like brush (I used the brushes from my Latisse prescription, waste not, want not).While the topcoat I used was ‘matte’, it does have a very minor sheen to it when dry, which I do like how it turned out! Time and 3 teenagers will determine how well it holds up!

Me gustó aunque necesite ponerle pintura clear

Took me 2 coats over tile.Make sure you clean well and get every tiny hair or you'll paint it into your floor.The second step changed the texture so don't worry of it seems sticky even when dry after you finished step 1.Also, but the step 1 and 2 kit. I didn't notice this was a step 1 only and had to order step 2 separately. And you'll need it.I did skip out on doing 2 coats of step 2, but this isn't my main bathroom so I'm not that worried about the increased durability.